Search

Offshore wind turbines (OWTs) are affected by wind, wave, and current during their service life, which lead to the substructures undergoing combined effects of complex lateral loads and local scour. This phenomenon poses a significant challenge to the bearing capacity and cyclic responses of the widely used rigid monopiles for OWTs. This study develops three-dimensional numerical model to investigate the behavior of a rigid monopile subjected to lateral monotonic and cyclic loads, considering the stress history alteration induced by local scour. The hysteresis and plasticity accumulation of soils are captured by a bounding surface model. An accurate and concise semi-implicit stress integration scheme is creatively proposed to effectively incorporate this advanced constitutive model into the finite element (FE) software. The numerical model is verified by comparing FE results with centrifuge test results. Subsequently, the key factors such as cumulative deformation characteristics and bending moments distribution are investigated under different scour and cyclic loading conditions. The results indicate that with the facilitation of proposed semi-implicit scheme, the bounding surface model is capable of capturing the deformation pattern and cumulative deformation behavior of laterally loaded rigid monopile, and the cyclic responses of the monopile are significantly affected by the local scour. [ABSTRACT FROM AUTHOR]

• Eccentric and/or inclined loads induce nonlinear roto-translational displacements of pile groups. • Simplified modelling (beams, elastic half-space, localised yielding) compared with advanced analyses. • Vertical eccentric loads mobilise the lateral soil resistance at large cap displacements. • Charts for the reduction in vertical capacity, at prescribed cap displacements, due to load eccentricity and inclination. This paper presents a numerical study of 3 × 3 pile groups embedded in clay under vertical and inclined eccentric loads. Simplified modelling, based on elastic beams embedded in a soil continuum, is used to explore the soil-pile-cap response. This simple model allows rigorous treatment of the 3D foundation geometry and local soil plasticity, demonstrated through validation with 3D finite element analysis. The numerical results reveal that complex roto-translational displacements of the pile group are induced by eccentric or inclined loads, with highly nonlinear relationships when soil plasticity is considered. Interestingly, vertical eccentric loads mobilise the lateral soil resistance at large cap displacements. Thus, while existing t-z type models are shown to be adequate for serviceability predictions, they could provide overly-conservative estimates of the ultimate load capacity. Also, foundation internal forces can exceed allowable bending moments of reinforced concrete piles under multi-directional loads. For performance based design of pile groups under inclined eccentric actions, engineers should estimate the impact of soil yielding on both displacements and rotations of the cap, to satisfy limit state requirements. Dimensionless charts are presented, which describe the reduction in vertical capacity, for a prescribed cap displacement, as a function of load eccentricity and inclination. [ABSTRACT FROM AUTHOR]

It is very important to analyze the lateral cyclic response of monopiles for the design of offshore wind turbines (OWTs). A three-dimensional finite element method for lateral cyclic responses of large-diameter monopiles is developed based on a simplified constitutive model of clays that has been successfully encoded into the ABAQUS software package. The applicability of this method is validated by simulating the existing centrifugal model test. The method can predict the nonlinear hysteresis responses of monopiles in clays during cyclic loading, and the evolution of bending moment and lateral deflection profile of monopile with loading cycles. Various lateral cyclic loads with different loading patterns including one-way and two-way loading, symmetric and asymmetric loading, variable-amplitude and constant-amplitude loading are applied to monopiles. The impact of different cyclic loading patterns on lateral responses of large-diameter monopiles is systematically investigated. The research results can provide some reference for the engineering design of large-diameter monopiles under lateral cyclic loads. [ABSTRACT FROM AUTHOR]