Search

Energetically weak points in thermally insulated building envelopes are formed by thermal breaks that are implemented to structurally connect external balconies to internal slabs. Current thermal breaks comprise stainless steel bars that penetrate the insulation layer and thus cause significant thermal losses. A new thermal break composed of highly insulating aramid and glass fiber-reinforced polymer (AFRP and GFRP) components and aerogel granulate insulation materials was developed and the first prototypes of the load-bearing components were experimentally investigated. The use of AFRP leads to an excellent thermal performance with linear thermal transmittance values of below 0.15 W/m K. The experimental prototype investigations confirmed the targeted ductile failure mode through concrete crushing in the component–concrete interfaces. The serviceability limit state conditions are met for a targeted balcony cantilever span of 4.0 m. The material-tailored components can be manufactured by fully automated processes such as filament and tape winding and pultrusion to economically produce large quantities within a short time. [ABSTRACT FROM AUTHOR]

The objective of this article was to experimentally evaluate timber–concrete composite beams in two different situations – with and without glass fiber reinforced polymer (GFRP). Four full-scale composite beams (5.4 m in length) were produced, two of which had reinforcement (nominal thickness of 10 mm) and two with no reinforcement. The fiberglass reinforcement was formed from the impregnation of unidirectional fiberglass cloth – effective thickness of 0.5 mm – with epoxy resin. The connection system consisted of steel hooks inclined at 45 degrees, bonded with epoxy adhesive to the holes previously drilled on the wood, whose apparent density at 12% moisture content was 0.79 g/cm 3 . The reinforced timber–concrete composite beams tested had performance efficiency of 79% and average rupture strength of 142.5 kN. Finally, the reinforced timber–concrete composite beams were analytically evaluated using the proposed method in Eurocode5, showing reasonable agreement with the experimental results. [ABSTRACT FROM AUTHOR]