Search

Experimental measurements are obtained to investigate the detailed hydrodynamics of wave–wave interactions in the swash-zone. Two bores are generated using a double dam-break mechanism and interact on a 1:10 impermeable rough slope. Measurements of the hydrodynamics are obtained via acoustic displacement sensors and a combined particle image velocimetry and laser induced fluorescent system. Two types of interactions are investigated: wave capture, with the second bore reaching the first one during the uprush, and weak wave–backwash interactions when interaction happens during the backwash of the first wave. The relative strength of the bores at the initial shoreline and time between their arrivals determines the initial type of interaction, however the type as well as the intensity of the interaction may vary throughout the swash-zone for the same swash event. During wave capture and weak wave–backwash interactions, the fluid of the first bore is advected upwards, then mixed with the fluid of the second bore by intense shearing and highly turbulent vortices generated at the front of the second bore because of the relative velocity differences between the two bores. The details of the hydrodynamics during interaction confirm the potential of swash–swash interactions to suspend sediment and transport it shoreward or interrupt seaward sediment transport. [ABSTRACT FROM AUTHOR]

Nearshore submerged structures made of sand-filled geosystems are an interesting use for this type of coastal protection technology. These systems have an advantage over more traditional materials such as concrete units or rock, which is the limited and non-permanent impact on natural coastal processes. On top of that are also some important research achievements and improvements at the level of the materials. However, at more exposed hydraulic conditions under high wave energy its application is still hampered by the lack of knowledge about their performance. This paper describes research results based on a series of laboratory measurements of the hydrodynamic and morphodynamic change produced in the vicinity of submerged nearshore structures. An analysis of the different model outputs produced, with respect to sediment transport, wave reflection and wave-induced pressures, has been made and is discussed throughout the paper. Such a comparative analysis provides insights into the efficiency of each defence scheme in maintaining a beach and in protecting the shoreline. The sand-filled geosystems as nearshore submerged structures proved to be efficient in retarding the offshore movement of sediments and in maintaining the shoreline, even if instabilities due to elements' displacement and local scour have been observed. [ABSTRACT FROM AUTHOR]

Abstract: A thorough discussion of results from laboratory experiments with regular waves sheds light on the gap that lies between the sediment transport associated with ripple migration and the performance of a standard bedload transport formula in terms of bed shear concept. It is found that the extent of deviations of the bedload transport formula by Ribberink (1998) from the measured rate of sediment transport associated with ripple migration becomes systematically apparent under conditions of increasing settling time factor Ω s (= η/(w 0 T); η is the ripple height, w 0 the settling velocity and T the wave period). Re-examination of previous two field studies demonstrates a further reinforcement for phase-lag argument addressed in this paper. [Copyright &y& Elsevier]

Abstract: New laboratory data are presented on the influence of free long waves, bound long waves and wave groups on sediment transport in the surf and swash zones. As a result of the very significant difficulties in isolating and identifying the morphodynamic influences of long waves and wave groups in field conditions, a laboratory study was designed specifically to enable measurements of sediment transport that resolve these influences. The evolution of model sand beaches, each with the same initial plane slope, was measured for a range of wave conditions, firstly using monochromatic short waves. Subsequently, the monochromatic conditions were perturbed with free long waves and then substituted with bichromatic wave groups with the same mean energy flux. The beach profile changes and net cross-shore transport rates were extracted and compared for the different wave conditions, with and without long waves and wave groups. The experiments include a range of wave conditions, e.g. high-energy, moderate-energy, low-energy waves, which induce both spilling and plunging breakers and different turbulent intensities, and the beaches evolve to form classical accretive, erosive, and intermediate beach states. The data clearly demonstrate that free long waves influence surf zone morphodynamics and promote increased onshore sediment transport during accretive conditions and decreased offshore transport under erosive conditions. In contrast, wave groups, which can generate both forced and free long waves, generally reduce onshore transport during accretive conditions and increase offshore transport under erosive conditions. The influence of the free long waves and wave groups is consistent with the concept of the relative fall velocity, H/w s T, as a dominant parameter controlling net beach erosion or accretion. Free long waves tend to reduce H/w s T, promoting accretion, while wave groups tend to increase the effective H/w s T, promoting erosion. [Copyright &y& Elsevier]

Abstract: This paper analyses the morphological response induced by low-crested structures on the adjacent seabed, with particular interest in the erosion patterns that frequently develop at gaps and roundheads. The mechanisms responsible for erosion processes are examined by means of morphodynamic simulations with the numerical suite MIKE 21 CAMS developed by DHI Water & Environment. The main purpose of the paper is to verify how and how far a commercial code can predict bed evolution, in vicinity of defence structures in a real case, in order to get information that may be very useful for structure design and possible maintenance of existing works. The code is applied to a long-term simulation on a study site that is characterized by a composite intervention and suffers from severe erosion, Lido di Dante (Italy). The simulation covers the period (one year and a half) between two available multi-beam surveys, in order to have a detailed real bathymetry as starting point and another one, as accurate as the first, to compare numerical with surveyed results. All the other input data for the model, as waves, tide, wind and sediment characteristics, are derived from measurements in the area; moreover, the code is calibrated using wave and current data acquired during a field campaign. The bed evolution derived from simulations shows a good agreement with the survey both in the locations and in the intensity of erosive and depositional areas. A sensitivity analysis of results to some selected modelling parameters is performed on a shorter simulation period (one month), showing that accounting for bed slope in sediment transport modelling has greater effects in bathymetry evolution than the use of a complex sediment bathymetry or the representation of wave diffraction. [Copyright &y& Elsevier]

Abstract: Low crested structures for beach defence purposes are frequently configured in the form of cells. This paper investigates the hydrodynamic and morphological response of such defence schemes by means of laboratory experiments and numerical simulations. Experiments were carried out at the large mobile-bed basin of the “Laboratorio di Idraulica Costiera” of the “Politecnico di Bari”, IT. Tests peculiarity is the simultaneous simulation of three different types of lateral confinement: a channel, representative of an indefinitely long structure, and two areas with narrow and wide gaps, representative of a common scheme and of an almost isolated structure respectively. Submerged, zero freeboard and emerged conditions were tested. A typical storm of the Northern Adriatic sea was reproduced by 6 wave attacks. Water level and currents were measured in front and behind the structures, at gaps and roundheads. Results, focusing on rip current intensities and piling-up, are presented and discussed. An extensive plan view of wave intensities and flow patterns inside the basin is provided through numerical simulations with MIKE 21 numerical suite. The sand bed was surveyed along 30 profiles covering the narrow gap area and the isolated structure roundheads. For the submerged conditions tests, 15 of these profiles and the shoreline position were monitored after each step of the simulated storm. Average and maximum values of local erosion at the structure toe are presented. Time evolution of erosion at gaps is related to the main hydrodynamic variables through Bijker sediment transport formula. Evaluation of volume changes in the protected area shows that sand is in average trapped behind the barriers, being transported offshore from gaps and returning inshore over the crest. The observed and reconstructed transport mechanism is a combination of bed load and suspended transport, the latter being slightly more important. Bed level changes are well predicted by morphodynamic simulations performed with MIKE 21 CAMS. [Copyright &y& Elsevier]