Search

Sand waves are found on shallow, sandy seabeds throughout the world and their dynamics may pose an imminent threat to offshore construction. Therefore, there is a pressing need to understand bed level dynamics in sand wave areas. These bed level dynamics lead to variations in sand wave shape and migration rate over time. However, these variations cannot be explained with the present-day process-based sand wave models, which all include a purely periodic tidal forcing. To explain these fluctuations a more intricate description of the hydrodynamics is necessary. The aim of this study is to explore the importance of time-varying, non-tidal currents for sand wave dynamics in the North Sea. We adopted the three-dimensional Delft3D-Flexible Mesh model, and were able to reconstruct time-varying, non-tidal currents on top of the periodic tidal forcing, while significantly reducing computation times. The simulated currents and water levels showed a good agreement with in-situ measurements. Compared to the situation with only tidal forcing, the simulated sedimentation and erosion rates were amplified up to 15 times due to time-varying, non-tidal currents. Additionally, periods of net erosion were found at locations in the sand wave transect where tidally forced models only showed net-sedimentation. It is therefore important to consider time-varying, non-tidal currents when predicting future sand wave dynamics in the field. • The reproduction of observed hydrodynamics is improved significantly compared to previous sand wave modelling approaches. • Effects of time-varying, non-tidal currents on sediment transport in sand wave fields are quantified. • Net sedimentation rates due to time-varying, non-tidal currents are be up to 15 times larger than the tidally induced rates. • First application of Delft3D FM software to study sand wave dynamics leads to a significant decrease in computation time. • Excluding time-varying, non-tidal currents can lead to underestimation of sand wave migration and trench infill rates. [ABSTRACT FROM AUTHOR]

Storms and extremely energetic events may significantly impact the form and structure of beaches, and so cause erosive processes and coastal damages. Efficient management actions require an up-to-date and accurate knowledge of beach morphological changes, with the shoreline position being a good indicator of such changes. This work proposes the use of the open-source Shoreline Analysis and Extraction Tool (SAET) software for the definition of satellite-derived shorelines (SDSs) from L8 and Sentinel-2 imagery to reveal the shoreline position changes at the beaches of the Ebro Delta, NE Spain. Spatial-temporal models (STMs) of shoreline changes enable a characterisation of how the beaches responded to the storms of 2020. In conjunction with wave data, STMs enable an analysis of the erosive response to storm events, as well as a monitoring of subsequent beach recovery in the short and medium term (<1 year). Results show how Storm Gloria (January 2020, Hs max = 7.62 m) acted as a disruptive event and shifting point in the shoreline trend. As a response to that storm, major erosive processes occurred along the delta that caused an average shoreline retreat of 47 m. A progressive recovery during the spring and summer was mainly associated with periods of low wave energy. Nevertheless, by the end of the year a complete recovery had been achieved for about half of the coast, while the other half showed an average erosion of more than 10 m when compared to the pre-storm situation. Both the erosive and the recovery processes took place unevenly on different sections of the coast, probably dependent on factors such as the orientation of the beach and the pattern of longitudinal sediment transport along the coast. • Automatic shoreline extraction from Sentinel 2 and Landsat 8 imagery using SAET. • Pre and post-storm characterisation of SDS position in time and space using STMs. • Storm Gloria (January 2020) caused an unprecedented and heterogeneous impact on the Ebro Delta. • Slow recovery occurred in the months following the event conditioned by orientation and wave patterns. • About half of the delta showed a significant shoreline retreat by the end of 2020. [ABSTRACT FROM AUTHOR]

Quantitative predictions of marine and aeolian sediment transport in the nearshore–beach–dune system are important for designing Nature-Based Solutions (NBS) in coastal environments. To quantify the impact of the marine-aeolian interactions on shaping NBS, we present a framework coupling three existing process-based models: Delft3D Flexible Mesh, SWAN and AeoLiS. This framework facilitates the continuous exchange of bed levels, water levels and wave properties between numerical models focussing on the aeolian and marine domain. The coupled model is used to simulate the morphodynamic evolution of the Sand Engine mega-nourishment. Results display good agreement with the observed aeolian and marine volumetric developments, showing similar marine-driven erosion from the main peninsula and aeolian-driven infilling of the dune lake. To estimate the magnitude of the interactions between aeolian and marine processes, a comparison between the simulated morphological development by the coupled and stand-alone models was made. This comparison shows that aeolian sediment transport to the foredune, i.e. 214,000 m3 over 5 years, extracts sediment from the marine domain. As a result, the alongshore redistribution of sediment from the main peninsula by marine-driven processes decreased by 70,000 m3, representing 1.7% of the total marine-driven dispersion. From the aeolian perspective, marine-driven deposition and erosion reshape the cross-shore profile, controlling the supply-limited aeolian sediment transport and the magnitude of sediment deposition in the foredunes. In the region with persistent accretion along the Sand Engine's southern flank, a higher than average foredune deposition was predicted due to morphological development of the region where sediment is picked up by aeolian transport. Including these marine processes in the coupled model resulted in an increase of 1.3% in foredune growth in year 1 and up to 6.7% in year 5 along this accretive section. At the northern flank, where the developing lagoon and tidal channel provided increased shelter to the supratidal beach, predicted foredune deposition reduced up to −11.5% over the evaluation period. Our findings show that both aeolian and marine transports impact reshaping the nourished sand, where developments in one domain affect the other. The study findings echo that the interplay between aeolian- and marine-driven morphodynamics could play a relevant role when predicting sandy NBS. • Predicting nearshore–dune morphodynamics is enabled with a new 2D coupling framework. • The model reproduces the Sand Engine's dynamics in both marine and aeolian domains. • Alongshore varying marine sediment transport influences foredune growth patterns. • Marine alongshore transport is slightly reduced by aeolian transport into the dunes. [ABSTRACT FROM AUTHOR]

Storm surge, a major disaster in coastal areas, is generated by tropical cyclones. Strong currents and waves during storm surges often cause sediment transport and beach erosion, significantly damaging the coastal ecosystem. This paper presents a flow-wave-sediment-morphodynamic coupled model to predict morphodynamic changes caused by overwash during storm surges. In the model, the flow field is calculated using the generalized shallow water equations coupled with the Simulating Waves Nearshore (SWAN) model, while sediment transport and bed changes are computed using a non-equilibrium total-load sediment transport model. The model solves the governing equations by employing the explicit finite-volume approach based on a rectangular mesh. The Godunov-type central upwind scheme is adopted to calculate the interface fluxes, thereby solving the complex Riemann problem. A series of numerical experiments considering wave-induced longshore current and short-term bed erosion are conducted to validate the established model and demonstrate its ability to simulate waves, flow fields, and bed changes during storm surge. Specifically, we used the model to simulate the morphological evolution of the Santa Rosa barrier island caused by Hurricane Ivan's storm surge, and the results indicate that the model accurately predicts the real-case erosion process caused by storm surge and overwash during the hurricane. The simulated results clearly explain overwash development, including washover fans, foredune erosion, and back-barrier deposition. It demonstrates that the front dune significantly eroded with the Santa Rosa barrier island coastline retreating by a maximum of about 80 m during the storm surge. More than three breaches with a width of up to 135 m were formed on the sandy barrier due to wave overwash, while the topography at the breach changed significantly. • A new flow-wave-sediment-morphodynamic coupled model is developed to predict morphodynamic changes caused by overwash during storm surges. • A series of numerical experiments conducted using the new model demonstrates its ability and it successfully predicts the overwash erosion of the Santa Rosa barrier island during Hurricane Ivan's storm surge. [ABSTRACT FROM AUTHOR]