Search

Beach loss is a growing global challenge that threatens the safety of coastal communities, the health of coastal ecosystems, recreational amenities, and regional economies dependent on tourism. Spatial gradients in longshore sediment transport, or divergence of drift (DoD), is a primary driver of beach width change over multi-annual time scales, but the response of any particular beach can be challenging to characterize and predict. Here we present a new method to characterize DoD using a non-uniform segmentation of the coastline informed by the spatial distribution of longshore transport potential, including the location of physical barriers identified using satellite imagery, and both maxima and reversals in longshore transport potential derived from nearshore wave data. The method demonstrates improved capacity to predict beach width trends at sandy beaches compared to methods that rely on a uniform segmentation of the coastline. In an application to southern California where satellite data documents two decades of beach width change, the non-uniform segmentation method correctly predicts the sign of beach trends at 93% of transects within a littoral cell and achieves a linear correlation between DoD and beach width trends exceeding 0.8. Moreover, we find that a minimum of five years of data are required to establish consistently strong correlations between DoD and beach width changes. Conversely, use of a uniform segmentation is shown to be unreliable for estimating beach width trends due to strong sensitivities to shoreline segment size. This work shows the potential to leverage nearshore wave data and satellite-based beach width data for improved characterization of shoreline dynamics relevant to beach erosion management. • A new shoreline modeling method is presented for estimating divergence of drift. • Segment boundaries are identified using longshore transport characteristics. • Strong correlations were shown between divergence of drift and beach width trends. • A littoral Peclet number characterizes the dominant longshore transport mechanism. [ABSTRACT FROM AUTHOR]

This paper presents the use of an Eulerian–Eulerian multi-phase model to examine sediment transport over a gravel beach under regular waves. A previously published full-scale experiment is reproduced numerically; the simulated wave deformation, flow velocity, pore pressure, and morphological evolution are consistent with measurements. The multi-phase model can produce berm formation for smaller waves and beach erosion for larger waves as observation in previous field studies. The sensitivity analysis suggests that the nonlinear component of drag has significant effect on the berm formation through infiltration and exfiltration. The two simulated forces applied on the sediment (drag and buoyancy) are examined. The drag is the main force directly for sediment transport; therefore the sediment transport rate has high correlation with depth-averaged flow velocity. The buoyancy that is caused by plunging flow impacting beach face can push the sediment landward in the bore front, where the flow acceleration has its peak. The flow acceleration is considered in some previous sediment transport models empirically for simulating morphological evolution of gravel beach under waves. The buoyancy links the flow acceleration and sediment transport rate in the bore front. • Sediment transport in a gravel beach is simulated using a multiphase model. • The drag is the main force directly for sediment transport. • The buoyancy links the flow acceleration and sediment transport rate in the bore front. • The nonlinear drag has the effect on berm formation. [ABSTRACT FROM AUTHOR]

Storm surge, a major disaster in coastal areas, is generated by tropical cyclones. Strong currents and waves during storm surges often cause sediment transport and beach erosion, significantly damaging the coastal ecosystem. This paper presents a flow-wave-sediment-morphodynamic coupled model to predict morphodynamic changes caused by overwash during storm surges. In the model, the flow field is calculated using the generalized shallow water equations coupled with the Simulating Waves Nearshore (SWAN) model, while sediment transport and bed changes are computed using a non-equilibrium total-load sediment transport model. The model solves the governing equations by employing the explicit finite-volume approach based on a rectangular mesh. The Godunov-type central upwind scheme is adopted to calculate the interface fluxes, thereby solving the complex Riemann problem. A series of numerical experiments considering wave-induced longshore current and short-term bed erosion are conducted to validate the established model and demonstrate its ability to simulate waves, flow fields, and bed changes during storm surge. Specifically, we used the model to simulate the morphological evolution of the Santa Rosa barrier island caused by Hurricane Ivan's storm surge, and the results indicate that the model accurately predicts the real-case erosion process caused by storm surge and overwash during the hurricane. The simulated results clearly explain overwash development, including washover fans, foredune erosion, and back-barrier deposition. It demonstrates that the front dune significantly eroded with the Santa Rosa barrier island coastline retreating by a maximum of about 80 m during the storm surge. More than three breaches with a width of up to 135 m were formed on the sandy barrier due to wave overwash, while the topography at the breach changed significantly. • A new flow-wave-sediment-morphodynamic coupled model is developed to predict morphodynamic changes caused by overwash during storm surges. • A series of numerical experiments conducted using the new model demonstrates its ability and it successfully predicts the overwash erosion of the Santa Rosa barrier island during Hurricane Ivan's storm surge. [ABSTRACT FROM AUTHOR]