Search

Multi-purpose Artificial Reefs (MPARs) are structures that may provide aesthetically acceptable coastal protection and improve recreational outcomes. Twenty years after construction of the first MPAR, Narrowneck Reef on the Gold Coast of Australia, most of the available literature is still focused on the planning, design and construction of such structures and peer-reviewed publications on their post-construction monitoring, interaction with sediment transport and impacts on coastal morphology are lacking. The aim of this paper is to evaluate how does Narrowneck Reef influence the sediment transport, and morphological changes around the anthropogenic structure, two decades after construction. To do so, a combination of ten high spatial resolution topo-bathymetric surveys from the top of the dune to the 10 m depth captured over 21 months and a series of 60 simulations using a calibrated numerical model were used. Our results demonstrate that: although not expected during design or reported in similar structures, sand can bypass the MPAR around its offshore end; under oblique waves, the longshore currents are deflected as they pass the reef, resulting in a shadow zone on the downdrift side where sand deposits; the bar crest tends to be higher on the reef's updrift side compared to downdrift, indicating that the MPAR can act as a store for sediments, as initially designed. Furthermore, the MPAR can act to stabilise the bar as it moves onshore with a downdrift offset of the inner bar as a result of low oblique wave incidence. The results presented here demonstrate that the short-term response to the MPAR twenty years after construction is more closely related to the updrift build up of sand and the deflection of longshore currents as they encounter the reef than to the dissipation of wave energy. This is because MPARs are designed to dissipate just enough wave energy so that they can achieve their recreational goal (surfing). • Beach morphodynamic state and tide level influence sediment transport pathways. • Sand bypassing occurs mainly inshore of the structure. • Under large oblique waves, sand bypass can occur offshore of the structure. • Deflection of longshore currents influence morphological response to the reef. • Bar crest is usually higher on the reef's updrift side compared to downdrift. [ABSTRACT FROM AUTHOR]

Numerical coastal erosion models are used by engineers to predict the magnitude of storm erosion at the coastline. In particular, the 'dry' region of the beach, extending landwards from the waterline to include the beach face, berm and dunes, is a particular focus of interest to managers, planners and other coastal practitioners. However, the choice of the most appropriate numerical model to predict subaerial beach erosion requires careful consideration of the strengths and limitations of each model, and the quality and quantity of field data available for both model calibration and prediction. While no model can perfectly replicate observed upper beach erosion, this study specifically assesses the quantity of field calibration data required to achieve optimum model performance for coastal storm erosion modelling applications. Two of the most commonly used, but differently formulated, coastal erosion profile models are compared: the process-based and more complex model XBeach, and the semi-empirical and significantly simpler model SBEACH. A rigorous calibration technique (the Generalised Likelihood Uncertainty Estimation) is applied to both models, using a comprehensive dataset of pre- and post-storm topographic measurements collected over four differing storm events at Narrabeen-Collaroy Beach in southeast Australia, as well as at two adjacent embayed beaches. When applying the two numerical models using their default parameters (i.e., with no model calibration), SBEACH was found to be the more skilful model and XBeach default parameters were found to have no predictive skill along this stretch of coastline. Once calibrated with detailed field observations obtained before and after a single storm event, XBeach validation skill rose considerably and provided predictions of subaerial beach profile change with greater skill (87% better Brier Skill Score on average for the same calibration data) than SBEACH. Overall XBeach model performance was found to marginally improve when field observations obtained from additional storm events were included in the calibration process, whereas SBEACH showed negligible improvement. A comparison was made of the options available for transferring previously-calibrated parameters to adjacent locations, finding spatial proximity to be the most sensitive indicator of model performance for a transferred parameter set. Due to the alongshore variability in pre-storm topography as well as wave exposure at the sites tested, the spatial coverage of data was more important for the calibration process than the magnitude of the individual storm(s) used for a specific calibration. The results of this study underscore the need for careful consideration of the available calibration field data when choosing and optimising coastal erosion models. • Default XBeach parameters were found to be non-skilful at coastal sites in southeast Australia. • The XBeach model outperformed the SBEACH model when one or more calibration storm event field datasets were available. • Collection of calibration pre- and post-storm field data at specific locations of interest was important. • Spatial proximity was found to be a good performance indicator of calibrated parameter values transferred to new locations. [ABSTRACT FROM AUTHOR]