Search

Beach accretion is the natural mechanism that allows dry beaches to recover. Human response to climate change produces hardening of the coasts and the incident marine climate, which increases beach erosion produced during winter and prevents a full recovery during summer. Beach nourishments are performed all around the world to fight coastal erosion with a nature-friendly philosophy. Softer techniques as beach scraping are also widely applied. A kind of beach scraping is proposed here as an innovative nature-assisted beach enhancement technique, that aims to accelerate naturally produced sand accretion on the beach profile. It consists of mechanically ploughing the intertidal area of a beach to create ridges and furrows. Prototype-scale laboratory experiments were performed to analyse its effectiveness under controlled conditions. Seven 1 h tests having different water levels and the same initial bottom geometry and sea state conditions (H s = 0.3 m, T p = 7 s) were performed. Sea state, sand, and initial slope characteristics assured accretive conditions. Ploughed and flatbed initial slope geometries were simultaneously tested into two sub-channels of the wave flume. The results indicate that the bottom roughness is 3.57 times larger for the ploughed geometry. Consequently, wave energy dissipation is larger for the ploughed geometry, and therefore, the significant wave height at the shoreward end of the study area is 11% smaller for the ploughed geometry. This smaller wave height under the ploughed morphology leads to more accretive conditions, as observed from the measured onshore sediment transport, which is 2.9 times larger than the natural transport, and the larger accreted sediment volume in all seven test cases. These results demonstrate the effectiveness of ploughing to enhance natural beach accretion under highly probable accretion conditions. Further research is required to define the thresholds of marine conditions in which the potential of beach ploughing can be exploded. • Working with nature. • Ploughing the intertidal area of a beach enhances natural accretion. • Real scale laboratory experiments measuring sediment transport. • Mechanically ploughing increases bed roughness. • Extra wave energy dissipation is produced by ploughing. [ABSTRACT FROM AUTHOR]

A moderate-size (344,000 m3) subaerial beach nourishment was placed in 2012 in front of flood-prone homes at Imperial Beach, California. The subaerially persistent coarser-than-native nourishment sand spread alongshore over a ∼ 4 km span. By winter 2018/19 subaerial sand volumes in front of the flood-prone homes were eroded to near pre-nourishment levels, while sand accumulated near a river mouth ∼ 1.5 km to the south. The observed alongshore patterns of post-nourishment erosion/accretion are consistent with the modeled convergence/divergence of alongshore currents driven by wave radiation stress S x y gradients associated with refraction over a relic cobble ebb shoal. The same alongshore patterns of subaerial erosion/accretion were observed in the 6 years preceding the nourishment, indicating a wave-driven erosion hotspot in front of the flood-prone homes, and an accretion hotspot near the region of river mouth migration. Over the 13-yr observation period, the river mouth migrated 600 m southward and closed in 2016, possibly owing to nourishment sand and El Niño intensified local drift convergence. The computationally efficient drift (radiation stress) gradient model uses simplified wave and surfzone dynamics, assumes proportionality between alongshore sediment transport and the radiation stress component S x y , but nevertheless captures the overall patterns of alongshore nourishment evolution and provides a framework to inform sand management. • The subaerial influence of relatively coarse beach nourishment sand spans 4 km of coast 6 years after placement. • Accretion and erosion hotspots are persistent, 6 years before and after nourishment. • A simple drift divergence model that captures refraction over an ebb shoal describes the alongshore variable sand volume trends. [ABSTRACT FROM AUTHOR]

Beaches are dynamic systems characterized by frequent morphological changes due to storm events, gradients in longshore sediment transport, seasonal variations in wave climate and more. The complexity of variations in beach morphology can increase significantly after a beach nourishment, particularly when coastal structures are involved. This study investigates the impacts of a groin field, consisting of both notched and traditional groins, on the morphological evolution of a beach in Deal, New Jersey, USA. More specifically, an evaluation of the performance and specifications of the notched groins is undertaken. In 2016, the beach in Deal was nourished and three of the eight groins comprising the groin field were concurrently notched in order to promote increased movement of longshore sediment transport while maintaining a stable shoreline. The study site was monitored nine times over a period of two years (2018–2019) using Unmanned Aerial Systems Structure from Motion (UAS-SfM) photogrammetry. The near-term morphological response of the study site was evaluated by analyzing high-resolution digital elevation models (DEMs) and longshore sediment transport estimates based on measured wave data. The elevation change maps established that in general, the groin notching was partially successful in reducing shoreline asymmetry in consequence of sediment transport bypassing through the notches. Differences in behavior and patterns of elevation change adjacent to each individual notched groin was observed even though they were all notched according to the same specifications. While all three notched groins were effective in stabilizing the adjacent shoreline, they varied in their effectiveness at promoting longshore sediment transport through the notch. This is likely attributable to the relative location of the notched groins within the groin field and the characteristics of the post-nourishment morphological evolution; the direction of net annual longshore sediment transport at Deal beach is northward, which caused the southern areas of the study site to narrow and the northern areas of the study site to widen. Consequently, the notched groins in the wider sections of beach did not function as intended, as the notches filled in with sediment causing them to mimic the behavior of a traditional groin, including restricted longshore sediment transport and significant erosion/accretion offsets. In the narrower section of beach, the notched groin functioned as designed, such that the notch was located in the swash zone and therefore allowed bi-directional sediment transport and maintained a stable and relatively symmetrical shoreline. Thus, the notched groins performed most effectively when the notch was consistently located toward the seaward end of the swash zone. • Groin notches function optimally when the notch is located in the swash zone. • Improperly constructed notches can fill-in with sediment and behave like traditional groins. • Notch specifications can vary to account for position and uncertainty in the equilibrated beach. • Notch designs should reflect the direction and magnitude of net longshore sediment transport. [ABSTRACT FROM AUTHOR]

In many places, sandy coastlines and their associated assets are at high risk of erosion and flooding, with this risk increasing under climate change and sea level rise. In this context, dynamic cobble berm revetments represent a potentially sustainable protection technique to armour sandy beaches, reduce wave runup and protect the hinterland against wave attack. However, the behaviour and performance of such structures is not well understood. The dynamic cobble berm revetment located in North Cove, WA, USA, was monitored over a spring tidal cycle in January 2019. A representative 60 m alongshore section was monitored over 10 days using 2D laser scanner (lidar) measurements, GPS ground elevation surveys, Radio Frequency Identification of individual cobbles and revetment thickness measurements. These data were used together to assess the dynamic behaviour and functionality of the revetment throughout the experiment. Over the course of the experiment, the surface elevation changed by up to ±0.5 m, and the revetment volume reduced by an average 0.67 m3/m. These changes were found to be caused by relatively large significant wave height and high water levels. The revetment demonstrated a dynamic stability and the capacity to quickly reshape under changing hydrodynamic conditions. The instrumented cobbles were transported along and cross-shore and accumulated at the toe of the revetment, but were never transported seaward of the toe. The revetment also managed to recover some of the lost volume under moderate wave conditions. The revetment behaviour was found to be influenced by variation in the cobble-sand matrix. The underlying sand dynamics – i.e. , accumulation or removal of sand within the cobbles – were found to govern the overall volume changes and were important to the overall stability of the revetment. Seven possible transport regimes were identified, and a model of the internal sand dynamics was developed. During the spring tidal cycle measured here, the revetment protected the sand scarp immediately landward and prevented flooding of the hinterland, while armouring the underlying sand. Over time, renourishment will likely be required due to longshore sediment transport, and preliminary guidelines for this and other aspects of design are suggested. • A field experiment was undertaken on a dynamic cobble berm revetment in North Cove, US. • The revetment showed a dynamic stability and a rapid adaptability to external forcing. • The water level at the toe of the structure appeared to be the primary driver of change. • A novel model highlighting the importance of internal sand dynamic was created. • Guidelines are proposed for design and nourishment of the structure. [ABSTRACT FROM AUTHOR]