Search

Sand waves are found on shallow, sandy seabeds throughout the world and their dynamics may pose an imminent threat to offshore construction. Therefore, there is a pressing need to understand bed level dynamics in sand wave areas. These bed level dynamics lead to variations in sand wave shape and migration rate over time. However, these variations cannot be explained with the present-day process-based sand wave models, which all include a purely periodic tidal forcing. To explain these fluctuations a more intricate description of the hydrodynamics is necessary. The aim of this study is to explore the importance of time-varying, non-tidal currents for sand wave dynamics in the North Sea. We adopted the three-dimensional Delft3D-Flexible Mesh model, and were able to reconstruct time-varying, non-tidal currents on top of the periodic tidal forcing, while significantly reducing computation times. The simulated currents and water levels showed a good agreement with in-situ measurements. Compared to the situation with only tidal forcing, the simulated sedimentation and erosion rates were amplified up to 15 times due to time-varying, non-tidal currents. Additionally, periods of net erosion were found at locations in the sand wave transect where tidally forced models only showed net-sedimentation. It is therefore important to consider time-varying, non-tidal currents when predicting future sand wave dynamics in the field. • The reproduction of observed hydrodynamics is improved significantly compared to previous sand wave modelling approaches. • Effects of time-varying, non-tidal currents on sediment transport in sand wave fields are quantified. • Net sedimentation rates due to time-varying, non-tidal currents are be up to 15 times larger than the tidally induced rates. • First application of Delft3D FM software to study sand wave dynamics leads to a significant decrease in computation time. • Excluding time-varying, non-tidal currents can lead to underestimation of sand wave migration and trench infill rates. [ABSTRACT FROM AUTHOR]

Storms and extremely energetic events may significantly impact the form and structure of beaches, and so cause erosive processes and coastal damages. Efficient management actions require an up-to-date and accurate knowledge of beach morphological changes, with the shoreline position being a good indicator of such changes. This work proposes the use of the open-source Shoreline Analysis and Extraction Tool (SAET) software for the definition of satellite-derived shorelines (SDSs) from L8 and Sentinel-2 imagery to reveal the shoreline position changes at the beaches of the Ebro Delta, NE Spain. Spatial-temporal models (STMs) of shoreline changes enable a characterisation of how the beaches responded to the storms of 2020. In conjunction with wave data, STMs enable an analysis of the erosive response to storm events, as well as a monitoring of subsequent beach recovery in the short and medium term (<1 year). Results show how Storm Gloria (January 2020, Hs max = 7.62 m) acted as a disruptive event and shifting point in the shoreline trend. As a response to that storm, major erosive processes occurred along the delta that caused an average shoreline retreat of 47 m. A progressive recovery during the spring and summer was mainly associated with periods of low wave energy. Nevertheless, by the end of the year a complete recovery had been achieved for about half of the coast, while the other half showed an average erosion of more than 10 m when compared to the pre-storm situation. Both the erosive and the recovery processes took place unevenly on different sections of the coast, probably dependent on factors such as the orientation of the beach and the pattern of longitudinal sediment transport along the coast. • Automatic shoreline extraction from Sentinel 2 and Landsat 8 imagery using SAET. • Pre and post-storm characterisation of SDS position in time and space using STMs. • Storm Gloria (January 2020) caused an unprecedented and heterogeneous impact on the Ebro Delta. • Slow recovery occurred in the months following the event conditioned by orientation and wave patterns. • About half of the delta showed a significant shoreline retreat by the end of 2020. [ABSTRACT FROM AUTHOR]

Quantitative predictions of marine and aeolian sediment transport in the nearshore–beach–dune system are important for designing Nature-Based Solutions (NBS) in coastal environments. To quantify the impact of the marine-aeolian interactions on shaping NBS, we present a framework coupling three existing process-based models: Delft3D Flexible Mesh, SWAN and AeoLiS. This framework facilitates the continuous exchange of bed levels, water levels and wave properties between numerical models focussing on the aeolian and marine domain. The coupled model is used to simulate the morphodynamic evolution of the Sand Engine mega-nourishment. Results display good agreement with the observed aeolian and marine volumetric developments, showing similar marine-driven erosion from the main peninsula and aeolian-driven infilling of the dune lake. To estimate the magnitude of the interactions between aeolian and marine processes, a comparison between the simulated morphological development by the coupled and stand-alone models was made. This comparison shows that aeolian sediment transport to the foredune, i.e. 214,000 m3 over 5 years, extracts sediment from the marine domain. As a result, the alongshore redistribution of sediment from the main peninsula by marine-driven processes decreased by 70,000 m3, representing 1.7% of the total marine-driven dispersion. From the aeolian perspective, marine-driven deposition and erosion reshape the cross-shore profile, controlling the supply-limited aeolian sediment transport and the magnitude of sediment deposition in the foredunes. In the region with persistent accretion along the Sand Engine's southern flank, a higher than average foredune deposition was predicted due to morphological development of the region where sediment is picked up by aeolian transport. Including these marine processes in the coupled model resulted in an increase of 1.3% in foredune growth in year 1 and up to 6.7% in year 5 along this accretive section. At the northern flank, where the developing lagoon and tidal channel provided increased shelter to the supratidal beach, predicted foredune deposition reduced up to −11.5% over the evaluation period. Our findings show that both aeolian and marine transports impact reshaping the nourished sand, where developments in one domain affect the other. The study findings echo that the interplay between aeolian- and marine-driven morphodynamics could play a relevant role when predicting sandy NBS. • Predicting nearshore–dune morphodynamics is enabled with a new 2D coupling framework. • The model reproduces the Sand Engine's dynamics in both marine and aeolian domains. • Alongshore varying marine sediment transport influences foredune growth patterns. • Marine alongshore transport is slightly reduced by aeolian transport into the dunes. [ABSTRACT FROM AUTHOR]

Storm surge, a major disaster in coastal areas, is generated by tropical cyclones. Strong currents and waves during storm surges often cause sediment transport and beach erosion, significantly damaging the coastal ecosystem. This paper presents a flow-wave-sediment-morphodynamic coupled model to predict morphodynamic changes caused by overwash during storm surges. In the model, the flow field is calculated using the generalized shallow water equations coupled with the Simulating Waves Nearshore (SWAN) model, while sediment transport and bed changes are computed using a non-equilibrium total-load sediment transport model. The model solves the governing equations by employing the explicit finite-volume approach based on a rectangular mesh. The Godunov-type central upwind scheme is adopted to calculate the interface fluxes, thereby solving the complex Riemann problem. A series of numerical experiments considering wave-induced longshore current and short-term bed erosion are conducted to validate the established model and demonstrate its ability to simulate waves, flow fields, and bed changes during storm surge. Specifically, we used the model to simulate the morphological evolution of the Santa Rosa barrier island caused by Hurricane Ivan's storm surge, and the results indicate that the model accurately predicts the real-case erosion process caused by storm surge and overwash during the hurricane. The simulated results clearly explain overwash development, including washover fans, foredune erosion, and back-barrier deposition. It demonstrates that the front dune significantly eroded with the Santa Rosa barrier island coastline retreating by a maximum of about 80 m during the storm surge. More than three breaches with a width of up to 135 m were formed on the sandy barrier due to wave overwash, while the topography at the breach changed significantly. • A new flow-wave-sediment-morphodynamic coupled model is developed to predict morphodynamic changes caused by overwash during storm surges. • A series of numerical experiments conducted using the new model demonstrates its ability and it successfully predicts the overwash erosion of the Santa Rosa barrier island during Hurricane Ivan's storm surge. [ABSTRACT FROM AUTHOR]

Dune erosion during storm surges can lead to excessive damage to the dune system with devastating floods as a potential consequence. A risk assessment of areas protected by dunes can be facilitated by an understanding and description of the physical processes that take place. Field measurements, knowledge of underlying processes and numerical modelling have developed with time, which enabled a more comprehensive description and new predictive techniques. This review concerns dune erosion in the collision regime, and summarises relevant observations, describes underlying processes and explains existing models predicting dune erosion. Observations of dune erosion consist of field observations, laboratory experiments and manipulative field campaigns. The underlying physical processes that contribute to dune erosion are divided into processes that contribute to sediment transport due to hydrodynamic forcing, which occurs in the surf and swash zone, and sediment transport due to avalanching, which occurs in the swash zone, on the dune face and on the dune crest. The existing dune erosion models that are discussed here contain (empirical) equilibrium profile models and process-based models, which can both be a valuable tool for the risk assessment of storm surges. However, model uncertainties still remain, as specific processes are not yet fully understood and described. Examples are the influences of wave obliquity, sediment grain size, and vegetation on the dune face. By improving our knowledge through research and reducing these uncertainties, we can further improve our predictive models. This could eventually lead to more accurate predictions, more complete risk assessments, and sandy coastlines which are more resilient to excessive dune erosion and possible floods. • Reviews dune erosion during storm surges in the collision regime. • Summarises relevant field and laboratory observations • Summarises underlying hydrodynamic and morphodynamic processes • Summarises existing dune erosion models. [ABSTRACT FROM AUTHOR]

Training walls to improve navigability at river mouths alter natural sediment transport regimes, occasioning morphological changes in the nearby littoral zone. In addition, harbor channels and shorelines are susceptible to on-going changes in global circulation conditions and large-scale engineering interventions. Here we present a process-based modeling approach to determine the relationship between spatial patterns of erosion and deposition, seasonal river discharge, and the geometry of coastal defenses. The study uses the Magdalena River delta as an example, where the redistribution of freshwater and sediments after the construction of the "Tajamar" training wall heralded significant morphological changes in the area. The numerical experiments are used to describe how the erosion and deposition patterns within the estuary and delta of the Magdalena River are linked to the seasonal cycle of the Magdalena River and to the geometry of the hard structures. We demonstrate that the construction of the Tajamar and complementary hard structures would have decreased depositional fluxes in the littoral zone, leading to the observed shoreline retreat and disappearance of an extensive coastal lagoon system. It is shown that an aperture in the training walls may help restore the wetlands without compromising navigability. In addition, projected increases in mean sea level are shown to decrease velocities within the lower estuary, potentially causing increased sedimentation within the channel and more complex conditions for the management of safe navigation over the Magdalena River estuary. • Seawall construction on the Magdalena River, Colombia, resulted in the redistribution of freshwater and sediments. • Numerical experiments provide evidence that shoreline retreat was caused by the altered sedimentation regime. • A diversion system in the training walls may help restore sediment supply to the shorelines without risking navigability. • Sea level rise may increase rates of sedimentation within the estuary. [ABSTRACT FROM AUTHOR]

In this study the numerical model Delft3D is implemented on high-resolution grids to evaluate beach morphological response to groins and submerged breakwaters under sea-breeze conditions. The numerical model is compared with field measurements from three sites on the northern Yucatan coast of Mexico. At these sites, relatively low energy waves with significant wave heights arrive at a steep oblique angle to the coast that drives high sediment transport rates. After calibration of the model, by adjustment of model free parameters, the model results show accurate representations of the diurnal variation of hydrodynamic conditions (wave height and current velocity) driven by the daily sea-breezes. Moreover, the morphodynamic model shows a good representation of the rapid morphological changes, particularly of the accretion pattern caused by a temporary groin and the subsequent recovery following the structure removal. However, erosion patterns at the downdrift areas of structures were not reproduced, owing to the numerical model limitations of simulating swash morphodynamics. Model validation with field observations of the beach response behind submerged breakwaters enabled the model to be used for a parametric study. Following previous work, new equations are developed in the present study that show an improvement for predicting shoreline changes near submerged breakwaters under sea-breeze conditions. Despite the limitations in reproducing downdrift erosion, overall the high-resolution modelling approach satisfactorily simulates the hydrodynamic and the updrift accretion responses to coastal structures on sandy beaches with oblique waves. • Simulations of beach change near groins and submerged breakwaters are performed. • Results are compared to measurements at three sites with high sediment transport rates. • New equations show improved prediction of shoreline change near submerged structures. [ABSTRACT FROM AUTHOR]

Coastal dunes provide many ecosystem services including protection of infrastructure from wave overtopping and habitat for native species. Foredunes grow at different rates and assume different forms (i.e., short and wide to tall and narrow) depending on a range of factors including pre-existing beach and dune morphology, wind, wave, and water levels, sediment grain size, and vegetation characteristics, yet the relative importance of these factors on foredune growth is understudied. Here, we quantify foredune evolution (2016–2019) and explore the relative influence of a suite of metocean, sedimentary, and ecological factors for dune growth on three barrier islands in the U.S. North Carolina Outer Banks (Cape Lookout National Seashore). We incorporate observed and hindcast wind, wave, and water level data into the process-based, coupled beach-dune evolution model, Windsurf, to explore the relative contribution of factors likely to influence foredune growth at the annual timescale (2016–2017). Our cross-shore topographic profile observations show varied interannual foredune change rates and characteristics, including horizontal retreat and progradation at the dune toe and vertical erosion and accretion at the dune crest. Model results indicate that, of the factors explored, pre-existing morphology had the greatest influence on the type of foredune growth that occurred (i.e., incipient dune development, widening of the dune, and/or vertical accretion), which dramatically altered the final shape of the dune. Variations in wind and wave climates were associated with the relative contribution of marine- and aeolian-driven bed elevation changes and were particularly influential during storms. In addition, increases in the minimum elevation of vegetation on the dune profile (analogous to the cross-shore distance between the shoreline and established vegetation line, i.e., the vegetation limit, as coined by Duran and Moore, 2013) increased dune crest height and dune volume. Moreover, variations in the minimum vegetation elevation resulted in a larger range of dune crest elevations and dune volumes than differences in the median sand grain size. We suggest that insights into the relative influence of metocean, sedimentary, and ecological factors to dune growth can assist in the development of practical coastal management strategies. • Pre-existing beach-dune morphology had the largest influence on dune growth type. • Exposure to the dominant wave direction led to increased dune volume. • Higher minimum vegetation elevation and finer sand resulted in taller dunes. • Minimum vegetation elevation influenced dune growth more than sand grain size. [ABSTRACT FROM AUTHOR]

Experimental results involving shoreface nourishment scenarios are presented. The experiments are performed at small scale and the effects of nourishment placement and timing in relation to long-term cross-shore profile development are investigated. Four different nourishment scenarios are tested experimentally, with nourishment positioned both in the trough of a pre-developed profile as well as along the bar of the profile. The results demonstrate that under all scenarios the erosion of the shoreline slows relative to the case without nourishment. The two cases where the nourishment was placed along the bar reduced erosion of the shoreline more compared to the two cases with nourishment in the trough onshore of the bar. Compared to past experiments on nourishment presented in the literature, the present experiments were run for a longer duration, and the concepts of equilibrium profile and the development towards such an equilibrium were investigated. Curiously, the experiments showed a reversal of the sediment transport rate from being primarily offshore directed across the entire profile to onshore directed in the inner surf zone region closest to the shoreline. This reversal of transport rate occurred without changing the incoming wave conditions and resulted in deposition at the shoreline. This either questions the existence of equilibrium beach profiles or at the very least shows that the development towards such an equilibrium will not always be monotonic in time. • Shoreface nourishments are performed at model scale investigating the influence of timing and placement on long term profile development. • Placement of nourishment can disturb the cross-shore profile shape over long time. • After long time running with the same wave climate the transport rate changed from offshore directed to onshore directed in the inner surf zone. • The change in sign was related to cessation of wave-breaking and resulted in sand returning to an otherwise eroding beach. [ABSTRACT FROM AUTHOR]

Flooding and erosion are among the most relevant hazards for coastal regions and although they are linked, their inherent complexity has typically led them to be addressed separately, potentially leading to highly uncertain estimates. This paper has three aims: (a) to present a methodology for coupling coastal flood projections with shoreline changes; (b) to quantify the effects of neglecting the coupling of flooding and erosion on future projections at a case study location; and (c) to analyse the relative importance of the climate-related uncertainty sources. We use a suite of statistical, process-based, and physics-based models to generate and downscale storms, compute water levels affected by storm morphodynamics and long-term profile changes and propagate flooding over topo-bathymetries that are in turn modified to incorporate the impact of sea-level rise, longshore sediment transport and storm-driven erosion. We sample climate uncertainty by considering storm variability (synthetic generation) and ensembles of radiative forcing scenarios, regional climate models, and sea-level rise trajectories. For illustration purposes, we consider a 40-km coastal stretch in the Spanish Mediterranean. We find that if the effect of erosion is neglected, the mean values of the total water level and flooded area can be either over- or underestimated by up to 18% and 22%, and up to 7% and 85%, respectively, with respect to our coupled results. The factors that most influence total water levels are storm erosion and profile geometry, highlighting the relevance of using real profiles in shoreface translation. In the flooded area, longshore transport can play a fundamental enhancing role. We also find that the coupling approach used can contribute more to the projection of flooded areas than the choice of climate models and sea-level rise trajectories even by 2100 (up to 76% versus 8% and 16%, respectively). We conclude that neglecting erosion effects on coastal flooding can have management implications, especially for urban beaches, leading to poor adaptation planning and maladaptation. • We develop coupled coastal flooding and erosion projections for 2050 and 2 100. • We consider uncertainties in scenarios, climate models, storms, and sea-level rise. • Uncoupling erosion and flooding leads to biases in water levels and flooded areas. • Coupling erosion and flooding can affect flooded areas more than sea-level rise. [ABSTRACT FROM AUTHOR]

Nowadays there are numerous computational tools to forecast the evolution of the shoreline position in sandy coast environments. However, few studies have waited for the time horizon of the predictions to actually check the accuracy of the forecasted scenarios. Thus, this work proposed to assess the accuracy of medium-term predictions made with Long-Term Configuration (LTC) and GENEralised model for SImulating Shoreline change (GENESIS) numerical models for the time horizon of 15-year and evaluate the models' performance in forecasting the actual status of a complex sandy coastal stretch in 2018, the targeting year. The projection premises were already presented in Baptista et al. (2014) on which observational data used to calibrate and blind hindcast future scenarios of shoreline development was discussed. The case study focused on an area located downdrift of Poço da Cruz groin, on the northwest Portuguese coast, and considered two beach sectors in accordance with Baptista et al. (2014): sector AC, about 3.5 km long, and sector AB, about 2.4 km long and included in the first one. The whole coastal stretch is composed of sandy beaches, and past trends highlight erosion downdrift of Poço da Cruz groin due to the interruption of sediment transport. A monitoring program performed by the University of Aveiro between 2003 and 2018 (corresponding to the period of simulation presented in Baptista et al., 2014), including six topographic surveys, was considered for comparison with the projections previously made. An additional topographic survey performed in 2018, within COSMO programme, was also considered. Simulations results have proved divergent performances of LTC and GENESIS models, despite the equity of inputs parameters and modelling processes. It is concluded that GENESIS and LTC, considering the typical (TYP) wave climate (randomly generated to represent the typical frequencies of wave height and direction during five years), create an envelope (GENESIS below and LTC above) to the real average results. For TYP, GENESIS underestimates the mean retreat rates up to 23 m in sector AB and up to 23 m in AC; LTC overestimates the retreat up to 33 m in sector AB and up to 13 m in AC. Conversely, observed (OBS) wave climate (shorter characterisation period but maintaining the registered data sequence) projections overestimate the shoreline retreat in both coastal stretches, suggesting that a larger characterisation period should be more important than maintaining the sequence of recorded waves. For OBS, the models overestimate the mean retreat rates in both sectors: GENESIS overestimates up to 90 m in sector AB and up to 51 m in AC; LTC overestimates up to 60 m in AB and up to 60 m in AC. Also, the consideration of the artificial nourishment operations executed during the simulation period leads to better results in the LTC, which was overestimating the erosion rate. This showed that if all man-made interventions could be anticipated, the average retreat in the main sector, AC, would only be up to 5 % different from the projections made by Baptista et al. (2014) with LTC model and TYP wave climate. • Checked accuracy of 15-year forecasts. • Checked performance of LTC and GENESIS shoreline evolution models. • The wave sampling period used in calibration has relevant impact on forecasts made. • LTC and GENESIS create an envelope to the real average retreat surveyed. • Better projections would be achieved if planed interventions were known in advance. [ABSTRACT FROM AUTHOR]

Coastal zones are vulnerable to both erosion and flood risk, which can be assessed using coupled hydro-morphodynamic models. However, the use of such models as decision support tools suffers from a high degree of uncertainty, due to both incomplete knowledge and natural variability in the system. In this work, we show for the first time how the multilevel Monte Carlo method (MLMC) can be applied in hydro-morphodynamic coastal ocean modelling, here using the popular model XBeach, to quantify uncertainty by computing statistics of key output variables given uncertain input parameters. MLMC accelerates the Monte Carlo approach through the use of a hierarchy of models with different levels of resolution. Several theoretical and real-world coastal zone case studies are considered here, for which output variables that are key to the assessment of flood and erosion risk, such as wave run-up height and total eroded volume, are estimated. We show that MLMC can significantly reduce computational cost, resulting in speed up factors of 40 or greater compared to a standard Monte Carlo approach, whilst keeping the same level of accuracy. Furthermore, a sophisticated ensemble generating technique is used to estimate the cumulative distribution of output variables from the MLMC output. This allows for the probability of a variable exceeding a certain value to be estimated, such as the probability of a wave run-up height exceeding the height of a seawall. This is a valuable capability that can be used to inform decision-making under uncertainty. • First use of MLMC (multilevel Monte Carlo) with a coupled hydro-morphodynamic model. • Large drop in computational cost for same accuracy using MLMC instead of Monte Carlo. • Determine the distribution of variables of interest in coastal zone cases using MLMC. [ABSTRACT FROM AUTHOR]

Wind waves breaking at an angle with the shoreline force the drifting of littoral sediments, which is known for contributing to the formation and growth of barrier spits. Intriguingly, increased rates of longshore wave power have also been associated with the erosion of some barrier spits on the updrift margin of tidal inlets. Therefore, a numerical experiment was designed and is presented here, which investigates the possible links between the longshore wave power and the shortening of these elongated coastal barriers. Based on a process-based model, the experiment provides new insights into the forces at play in the redistribution of sediments between a sandspit and its adjacent inlet, respectively the Cap Ferret and the Bay of Arcachon's tidal inlet, in SW France. More particularly, model scenarios were defined that show how combined waves and tide create gradients of residual sediment transport responsible for a sediment deficit at the spit – inlet boundary. The deficit was also found to deepen with increasing longshore wave energy, as if the transfer of sediment from the spit to inlet shoals was accelerated. This physically explains the previously observed retreat of the spit's distal end during periods dominated by the positive phase of North Atlantic Oscillation (NAO) in winter. Indeed, according to model results, higher and/or more oblique waves associated with the positive phase of the NAO are expected to increase the transfer and storage of the drifting sediments to and by the inlet shoals, and this at the expense of the spit. While these conclusions remain valid, we noticed that the sensitivity of model results to the bottom friction enhanced the importance of accurately representing the spatio-temporal distribution of bed roughness when investigating the morphodynamic interactions between real-world tidal inlets and their margins. • Residual sediment transport is modelled at a mixed energy tidal inlet. • Waves with tides create transport gradients near the inlet's updrift spit extremity. • Larger or more oblique waves deepen this gradient and reinforce the sand deficit. • Physically sounded explanation to enhanced spit erosion during NAO + winters. • Bed roughness models need to be improved for 2DH inlet-spit morphodynamic modelling. [ABSTRACT FROM AUTHOR]

Multi-purpose Artificial Reefs (MPARs) are structures that may provide aesthetically acceptable coastal protection and improve recreational outcomes. Twenty years after construction of the first MPAR, Narrowneck Reef on the Gold Coast of Australia, most of the available literature is still focused on the planning, design and construction of such structures and peer-reviewed publications on their post-construction monitoring, interaction with sediment transport and impacts on coastal morphology are lacking. The aim of this paper is to evaluate how does Narrowneck Reef influence the sediment transport, and morphological changes around the anthropogenic structure, two decades after construction. To do so, a combination of ten high spatial resolution topo-bathymetric surveys from the top of the dune to the 10 m depth captured over 21 months and a series of 60 simulations using a calibrated numerical model were used. Our results demonstrate that: although not expected during design or reported in similar structures, sand can bypass the MPAR around its offshore end; under oblique waves, the longshore currents are deflected as they pass the reef, resulting in a shadow zone on the downdrift side where sand deposits; the bar crest tends to be higher on the reef's updrift side compared to downdrift, indicating that the MPAR can act as a store for sediments, as initially designed. Furthermore, the MPAR can act to stabilise the bar as it moves onshore with a downdrift offset of the inner bar as a result of low oblique wave incidence. The results presented here demonstrate that the short-term response to the MPAR twenty years after construction is more closely related to the updrift build up of sand and the deflection of longshore currents as they encounter the reef than to the dissipation of wave energy. This is because MPARs are designed to dissipate just enough wave energy so that they can achieve their recreational goal (surfing). • Beach morphodynamic state and tide level influence sediment transport pathways. • Sand bypassing occurs mainly inshore of the structure. • Under large oblique waves, sand bypass can occur offshore of the structure. • Deflection of longshore currents influence morphological response to the reef. • Bar crest is usually higher on the reef's updrift side compared to downdrift. [ABSTRACT FROM AUTHOR]