Search

The beach slope β is a key component characterizing the coastal response to wave forcing. Here we investigate the rapid adaptation of the upper beach slope to a given wave forcing, for the case of a lower flat platform. Such types of morphology are found on coral and rocky reef beaches and low tide terrace environments. The influence of the lower platform on this rapid equilibrium beach state is shown to be significant depending on the breaking wave regime. In particular, the width of the platform and its water level can affect the wave dissipation along the inner surf and thus the wave structure entering the swash. This paper provides a classification of the beach slope equilibrium values as a function of the Dean number on a short time scale (individual wave action), based on both offshore and swash wave conditions. A decreasing trend of the beach slope with increasing offshore Dean number (Ω 0) is found for Ω 0 ≲ 2. 7. For Ω 0 ≳ 2. 7 it is observed that the beach slope gradient is strongly controlled by the surf zone dissipation and it becomes necessary to define the swash Dean number (Ω s w) to classify the slope. Finally, a semi-empirical formula for the beach slope evolution in the case of a low tide platform is introduced and tested on two natural low-tide terrace beaches. • Definition of rapid equilibrium beach face slope associated to individual wave action. • Distinction between swash and surf dominated beaches on LTT beaches using Dean number based on offshore or local swash flow characteristics (Ω 0 or Ω s w). • Swash-dominated beaches respond directly to offshore wave forcing. • In surf-dominated beaches the inner-surf zone cannot be disregarded. • A simplified model is proposed to predict the rapid evolution of the beach slope as a function of the swash Dean number Ω s w. [ABSTRACT FROM AUTHOR]

Laboratory investigations of beach morphology change under wave action are undertaken to gain insight into coastal processes, design coastal structures and validate the predictions of numerical models. For the results of such experiments to be reliable, it is necessary that they are repeatable. The equilibrium beach concept, that beach morphology will evolve to a quasi-static equilibrium shape for a given forcing suggests that experiments should be repeatable to some degree. However, sediment transport in turbulent breaking and broken waves is complex and highly variable and the level of repeatability at different temporal and spatial scales is challenging to measure, as such, previous work has restricted comparisons to small numbers of waves. Here we use the results of two identical, 20-h large-scale wave flume experiments to investigate the repeatability of sediment transport and beach morphology change under waves at timescales down to individual swash events. It is shown that while flow characteristics from identical swash events are very repeatable, the sediment transported can be very different in both magnitude and direction due to differences in turbulence, sediment advection and morphological feedback. Over longer periods containing multiple matching swash events however, the beach responds in a very similar manner, with the level of morphological repeatability increasing with time. The results also demonstrate that gross swash zone sediment transport remains high even as a beach profile approaches quasi-equilibrium, but the proportion of individual swash events that cause large sediment fluxes (>±7.5 kg/event/m) reduces with time. The results of this laboratory study indicate that beach morphology change has a level of determinism over timescales of several minutes and longer, giving confidence in the results from physical modelling studies. However, the large differences in sediment transport from apparently identical swash events questions the value in pursuing numerical predictions of sediment transport at the wave-by-wave timescale unless the reversals in sediment transport between apparently near identical swash events can also be predicted. • Large-scale flume experiments are used to assess morphological repeatability. • The results of laboratory investigations of morphology change are repeatable. • Sediment fluxes from almost identical waves vary in magnitude and direction. • Over longer timescales, sediment fluxes from identical wave groups converge. • Gross sediment transport remains high even as beaches approach quasi-equilibrium. [ABSTRACT FROM AUTHOR]

Beach loss is a growing global challenge that threatens the safety of coastal communities, the health of coastal ecosystems, recreational amenities, and regional economies dependent on tourism. Spatial gradients in longshore sediment transport, or divergence of drift (DoD), is a primary driver of beach width change over multi-annual time scales, but the response of any particular beach can be challenging to characterize and predict. Here we present a new method to characterize DoD using a non-uniform segmentation of the coastline informed by the spatial distribution of longshore transport potential, including the location of physical barriers identified using satellite imagery, and both maxima and reversals in longshore transport potential derived from nearshore wave data. The method demonstrates improved capacity to predict beach width trends at sandy beaches compared to methods that rely on a uniform segmentation of the coastline. In an application to southern California where satellite data documents two decades of beach width change, the non-uniform segmentation method correctly predicts the sign of beach trends at 93% of transects within a littoral cell and achieves a linear correlation between DoD and beach width trends exceeding 0.8. Moreover, we find that a minimum of five years of data are required to establish consistently strong correlations between DoD and beach width changes. Conversely, use of a uniform segmentation is shown to be unreliable for estimating beach width trends due to strong sensitivities to shoreline segment size. This work shows the potential to leverage nearshore wave data and satellite-based beach width data for improved characterization of shoreline dynamics relevant to beach erosion management. • A new shoreline modeling method is presented for estimating divergence of drift. • Segment boundaries are identified using longshore transport characteristics. • Strong correlations were shown between divergence of drift and beach width trends. • A littoral Peclet number characterizes the dominant longshore transport mechanism. [ABSTRACT FROM AUTHOR]

Storms and extremely energetic events may significantly impact the form and structure of beaches, and so cause erosive processes and coastal damages. Efficient management actions require an up-to-date and accurate knowledge of beach morphological changes, with the shoreline position being a good indicator of such changes. This work proposes the use of the open-source Shoreline Analysis and Extraction Tool (SAET) software for the definition of satellite-derived shorelines (SDSs) from L8 and Sentinel-2 imagery to reveal the shoreline position changes at the beaches of the Ebro Delta, NE Spain. Spatial-temporal models (STMs) of shoreline changes enable a characterisation of how the beaches responded to the storms of 2020. In conjunction with wave data, STMs enable an analysis of the erosive response to storm events, as well as a monitoring of subsequent beach recovery in the short and medium term (<1 year). Results show how Storm Gloria (January 2020, Hs max = 7.62 m) acted as a disruptive event and shifting point in the shoreline trend. As a response to that storm, major erosive processes occurred along the delta that caused an average shoreline retreat of 47 m. A progressive recovery during the spring and summer was mainly associated with periods of low wave energy. Nevertheless, by the end of the year a complete recovery had been achieved for about half of the coast, while the other half showed an average erosion of more than 10 m when compared to the pre-storm situation. Both the erosive and the recovery processes took place unevenly on different sections of the coast, probably dependent on factors such as the orientation of the beach and the pattern of longitudinal sediment transport along the coast. • Automatic shoreline extraction from Sentinel 2 and Landsat 8 imagery using SAET. • Pre and post-storm characterisation of SDS position in time and space using STMs. • Storm Gloria (January 2020) caused an unprecedented and heterogeneous impact on the Ebro Delta. • Slow recovery occurred in the months following the event conditioned by orientation and wave patterns. • About half of the delta showed a significant shoreline retreat by the end of 2020. [ABSTRACT FROM AUTHOR]

This paper presents the use of an Eulerian–Eulerian multi-phase model to examine sediment transport over a gravel beach under regular waves. A previously published full-scale experiment is reproduced numerically; the simulated wave deformation, flow velocity, pore pressure, and morphological evolution are consistent with measurements. The multi-phase model can produce berm formation for smaller waves and beach erosion for larger waves as observation in previous field studies. The sensitivity analysis suggests that the nonlinear component of drag has significant effect on the berm formation through infiltration and exfiltration. The two simulated forces applied on the sediment (drag and buoyancy) are examined. The drag is the main force directly for sediment transport; therefore the sediment transport rate has high correlation with depth-averaged flow velocity. The buoyancy that is caused by plunging flow impacting beach face can push the sediment landward in the bore front, where the flow acceleration has its peak. The flow acceleration is considered in some previous sediment transport models empirically for simulating morphological evolution of gravel beach under waves. The buoyancy links the flow acceleration and sediment transport rate in the bore front. • Sediment transport in a gravel beach is simulated using a multiphase model. • The drag is the main force directly for sediment transport. • The buoyancy links the flow acceleration and sediment transport rate in the bore front. • The nonlinear drag has the effect on berm formation. [ABSTRACT FROM AUTHOR]

In this study the numerical model Delft3D is implemented on high-resolution grids to evaluate beach morphological response to groins and submerged breakwaters under sea-breeze conditions. The numerical model is compared with field measurements from three sites on the northern Yucatan coast of Mexico. At these sites, relatively low energy waves with significant wave heights arrive at a steep oblique angle to the coast that drives high sediment transport rates. After calibration of the model, by adjustment of model free parameters, the model results show accurate representations of the diurnal variation of hydrodynamic conditions (wave height and current velocity) driven by the daily sea-breezes. Moreover, the morphodynamic model shows a good representation of the rapid morphological changes, particularly of the accretion pattern caused by a temporary groin and the subsequent recovery following the structure removal. However, erosion patterns at the downdrift areas of structures were not reproduced, owing to the numerical model limitations of simulating swash morphodynamics. Model validation with field observations of the beach response behind submerged breakwaters enabled the model to be used for a parametric study. Following previous work, new equations are developed in the present study that show an improvement for predicting shoreline changes near submerged breakwaters under sea-breeze conditions. Despite the limitations in reproducing downdrift erosion, overall the high-resolution modelling approach satisfactorily simulates the hydrodynamic and the updrift accretion responses to coastal structures on sandy beaches with oblique waves. • Simulations of beach change near groins and submerged breakwaters are performed. • Results are compared to measurements at three sites with high sediment transport rates. • New equations show improved prediction of shoreline change near submerged structures. [ABSTRACT FROM AUTHOR]

A submerged, low-relief nearshore berm was constructed in the Pacific Ocean near the mouth of the Columbia River, USA, using 216,000 m3 of sediment dredged from the adjacent navigation channel. The material dredged from the navigation channel was placed on the northern flank of the ebb-tidal delta in water depths between 12 and 15 m and created a distinct feature that could be tracked over time. Field measurements and numerical modeling were used to evaluate the transport pathways, time scales, and physical processes responsible for dispersal of the berm and evaluate the suitability of the location for operational placement of dredged material to enhance the sediment supply to eroding beaches onshore of the placement site. Repeated multibeam bathymetric surveys characterized the initial berm morphology and dispersion of the berm between September 22, 2020, and March 10, 2021. During this time, the volume of sediment within the berm decreased by about 40%to 127,000 m3, the maximum height decreased by almost 60%, and the center of the deposit shifted onshore over 200 m. Observations of berm morphology were compared with predictions from a three-dimensional hydrodynamic and sediment transport model application to refine poorly constrained model input parameters including sediment transport coefficients, bed schematization, and grain size. The calibrated sediment transport model was used to predict the amount, timing, and direction of transport outside of the observed survey area. Model simulations predicted that tidal currents were weak in the vicinity of the berm and wave processes including enhanced bottom stresses and asymmetric bottom orbital velocities resulted in dominant onshore movement of sediment from the berm toward the coastline. Roughly 50% of the berm volume was predicted to disperse away from the initial placement site during the 169 day hindcast. Between 9 and 17% of the initial volume of the berm was predicted to accumulate along the shoreface of a shoreline reach experiencing chronic erosion directly onshore of the placement site. Scenarios exploring alternate placement locations suggested that the berm was relatively effective in enhancing the sediment supply along the eroding coastline north of the inlet. The transferable monitoring and modeling framework developed in this study can be used to inform implementation of strategic nearshore placements and regional sediment management in complex, high-energy coastal environments elsewhere. • The morphology and dispersion of a nearshore berm was quantified with repeated mulitbeam bathymetry surveys. • A three-dimensional hydrodynamic and sediment transport model was calibrated based on observations of berm morphology. • Calibrated model hindcast simulations accurately predicted observed changes in berm morphology. • Model predictions used to predict fate of berm sediment and quantify amount of sediment supplied to to eroding coastline. [ABSTRACT FROM AUTHOR]

Low-energy, non-tidal lake beaches are known to be subject to longshore morphodynamics, but little is known about how they are driven by wind and wave-driven currents. Lake Markermeer is a shallow (∼ 4 m deep), wind-dominated lake, of approximately 700 km 2. A gradient in wind-induced water level set-up at the leeward shore induces a flow from the shallower to the deeper parts of the lake, thereby generating a large-scale, horizontal circulation. Flow measurements and results from a numerical Delft3D model of the lake show that these circulations impact the nearshore currents greatly, even more than wave-driven longshore currents for most wind conditions. From nearshore measurements at the first study site in lake Markermeer, we found a clear relation between longshore sediment transport capacity and the measured longshore volume flux. The model numerical can predict flow direction and magnitude for any wind condition. Using wind statistics, the net transport capacity for a short period or a long term mean can be predicted. The relation is confirmed for a second study site, which shows a distinct net transport capacity that could not be explained from wave-driven longshore flow alone. Concluding, large-scale lake circulations are of great significance for the morphological development of low-energy, non-tidal beaches in shallow, wind-driven water bodies. Knowledge of these circulations and their dependence on wind characteristics is a crucial factor to better understand and predict sediment losses of lake beaches. • In wind-dominated lakes, bathymetrical variance causes water level set-up gradients. • In shallow lakes, set-up gradients can induce large-scale, horizontal circulations. • Large-scale lake circulations affect longshore sediment transport on lake beaches. • Longshore sediment transport has a significant impact on design and maintenance. [ABSTRACT FROM AUTHOR]

Beach accretion is the natural mechanism that allows dry beaches to recover. Human response to climate change produces hardening of the coasts and the incident marine climate, which increases beach erosion produced during winter and prevents a full recovery during summer. Beach nourishments are performed all around the world to fight coastal erosion with a nature-friendly philosophy. Softer techniques as beach scraping are also widely applied. A kind of beach scraping is proposed here as an innovative nature-assisted beach enhancement technique, that aims to accelerate naturally produced sand accretion on the beach profile. It consists of mechanically ploughing the intertidal area of a beach to create ridges and furrows. Prototype-scale laboratory experiments were performed to analyse its effectiveness under controlled conditions. Seven 1 h tests having different water levels and the same initial bottom geometry and sea state conditions (H s = 0.3 m, T p = 7 s) were performed. Sea state, sand, and initial slope characteristics assured accretive conditions. Ploughed and flatbed initial slope geometries were simultaneously tested into two sub-channels of the wave flume. The results indicate that the bottom roughness is 3.57 times larger for the ploughed geometry. Consequently, wave energy dissipation is larger for the ploughed geometry, and therefore, the significant wave height at the shoreward end of the study area is 11% smaller for the ploughed geometry. This smaller wave height under the ploughed morphology leads to more accretive conditions, as observed from the measured onshore sediment transport, which is 2.9 times larger than the natural transport, and the larger accreted sediment volume in all seven test cases. These results demonstrate the effectiveness of ploughing to enhance natural beach accretion under highly probable accretion conditions. Further research is required to define the thresholds of marine conditions in which the potential of beach ploughing can be exploded. • Working with nature. • Ploughing the intertidal area of a beach enhances natural accretion. • Real scale laboratory experiments measuring sediment transport. • Mechanically ploughing increases bed roughness. • Extra wave energy dissipation is produced by ploughing. [ABSTRACT FROM AUTHOR]

A moderate-size (344,000 m3) subaerial beach nourishment was placed in 2012 in front of flood-prone homes at Imperial Beach, California. The subaerially persistent coarser-than-native nourishment sand spread alongshore over a ∼ 4 km span. By winter 2018/19 subaerial sand volumes in front of the flood-prone homes were eroded to near pre-nourishment levels, while sand accumulated near a river mouth ∼ 1.5 km to the south. The observed alongshore patterns of post-nourishment erosion/accretion are consistent with the modeled convergence/divergence of alongshore currents driven by wave radiation stress S x y gradients associated with refraction over a relic cobble ebb shoal. The same alongshore patterns of subaerial erosion/accretion were observed in the 6 years preceding the nourishment, indicating a wave-driven erosion hotspot in front of the flood-prone homes, and an accretion hotspot near the region of river mouth migration. Over the 13-yr observation period, the river mouth migrated 600 m southward and closed in 2016, possibly owing to nourishment sand and El Niño intensified local drift convergence. The computationally efficient drift (radiation stress) gradient model uses simplified wave and surfzone dynamics, assumes proportionality between alongshore sediment transport and the radiation stress component S x y , but nevertheless captures the overall patterns of alongshore nourishment evolution and provides a framework to inform sand management. • The subaerial influence of relatively coarse beach nourishment sand spans 4 km of coast 6 years after placement. • Accretion and erosion hotspots are persistent, 6 years before and after nourishment. • A simple drift divergence model that captures refraction over an ebb shoal describes the alongshore variable sand volume trends. [ABSTRACT FROM AUTHOR]

Engineered and natural submerged coastal structures (e.g., submerged breakwaters and reefs) modify incident wave fields and thus can alter hydrodynamic processes adjacent to coastlines. Although submerged structures are generally assumed to promote beach protection by dissipating waves offshore and creating sheltered conditions in their lee, their interaction with waves can result in mean wave-driven circulation patterns that may either promote shoreline accretion or erosion. Here, we analyse the mean flow patterns and shoreline water levels (wave runup) in the lee of idealised impermeable submerged structures with a phase-resolved nonhydrostatic numerical model. Waves propagating over submerged structures can drive either a 2-cell mean (wave-averaged) circulation, which is characterised by diverging flows behind the structure and at the shoreline, or 4-cell circulation, with converging flows at the shoreline and diverging flows in the immediate lee of the structure. The numerical results show that the mode of circulation can be predicted with a set of relationships depending on the incoming wave heights, the structure crest level, and distance to the shoreline (or structure depth). Qualitative agreement between the mean flow and proxies for the sediment transport using an energetics approach suggest that the mean flow can be a robust proxy for inferring sediment transport patterns. For the cases considered, the submerged structures had a minimal influence on shoreline wave setup and wave runup despite the wave energy dissipation by the structures due to alongshore wave energy fluxes in the lee. Consequently, these results suggest that the coastal protection provided by the range of impermeable submerged structures we modelled is primarily due to their capacity to promote beach accretion. • A phase-resolved model simulates hydrodynamic interactions with submerged structures. • Waves can drive 2-cell or 4-cell mean circulation and sediment transport patterns. • Bottom shear stresses presented an overall similar pattern to the mean currents. • We develop a predictor for the flow patterns based on wave and structure parameters. • The submerged structures had limited influence on shoreline setup and wave runup. [ABSTRACT FROM AUTHOR]

New flume experiments with surrogate seagrass meadows are presented. The experiments included the creation of a full-scale and realistic Posidonia Oceanica model to evaluate the effect over wave attenuation, sediment transport and shoreline erosion. A hydrodynamic and morphodynamic comparison between cases with seagrass and without seagrass for two wave energy conditions was performed. Meadow density and submergence ratio were constant for tests under irregular waves. The wave height reduction, bar crest location, total sediment transport and shoreline position were used to evaluate the coastal protection efficiency of the meadow. The measured wave heights suffered a reduction due to the presence of the seagrass. These reductions were persistent in the area located between the onshore edge of the meadow and the depth of closure, being of greater magnitude in the more energetic case. All tests showed the development of a bar and the migration of the crest offshore over time. However, the dissipation of the incoming wave energy on the meadow made the bar crest stay closer to the shoreline and consequently generated a lower freeboard. In addition, the bar migration rate was reduced by the simulated meadow effect, in particular in the lower energetic case. A sediment volume significantly smaller was transported offshore when the seagrass meadow was present in both wave conditions. Additionally, in the higher energy case, a smaller shoreline retreat was observed when the meadow was present. • Flume experiments were carried out with a realistic Posidonia Oceanica model to assess the effect on beach sediment transport. • Two wave condition were analysed comparing the test with and without seagrass meadows. • Wave heights were reduced due to the effect of the Posidonia Oceanica model in areas after the meadow. • The total volume of sediment transported in the seagrass meadows cases was considerably less than without seagrass meadows. • Bar crest morphological parameters and shoreline position were analysed to verify the meadow effect on the coastal protection. [ABSTRACT FROM AUTHOR]

Beaches are dynamic systems characterized by frequent morphological changes due to storm events, gradients in longshore sediment transport, seasonal variations in wave climate and more. The complexity of variations in beach morphology can increase significantly after a beach nourishment, particularly when coastal structures are involved. This study investigates the impacts of a groin field, consisting of both notched and traditional groins, on the morphological evolution of a beach in Deal, New Jersey, USA. More specifically, an evaluation of the performance and specifications of the notched groins is undertaken. In 2016, the beach in Deal was nourished and three of the eight groins comprising the groin field were concurrently notched in order to promote increased movement of longshore sediment transport while maintaining a stable shoreline. The study site was monitored nine times over a period of two years (2018–2019) using Unmanned Aerial Systems Structure from Motion (UAS-SfM) photogrammetry. The near-term morphological response of the study site was evaluated by analyzing high-resolution digital elevation models (DEMs) and longshore sediment transport estimates based on measured wave data. The elevation change maps established that in general, the groin notching was partially successful in reducing shoreline asymmetry in consequence of sediment transport bypassing through the notches. Differences in behavior and patterns of elevation change adjacent to each individual notched groin was observed even though they were all notched according to the same specifications. While all three notched groins were effective in stabilizing the adjacent shoreline, they varied in their effectiveness at promoting longshore sediment transport through the notch. This is likely attributable to the relative location of the notched groins within the groin field and the characteristics of the post-nourishment morphological evolution; the direction of net annual longshore sediment transport at Deal beach is northward, which caused the southern areas of the study site to narrow and the northern areas of the study site to widen. Consequently, the notched groins in the wider sections of beach did not function as intended, as the notches filled in with sediment causing them to mimic the behavior of a traditional groin, including restricted longshore sediment transport and significant erosion/accretion offsets. In the narrower section of beach, the notched groin functioned as designed, such that the notch was located in the swash zone and therefore allowed bi-directional sediment transport and maintained a stable and relatively symmetrical shoreline. Thus, the notched groins performed most effectively when the notch was consistently located toward the seaward end of the swash zone. • Groin notches function optimally when the notch is located in the swash zone. • Improperly constructed notches can fill-in with sediment and behave like traditional groins. • Notch specifications can vary to account for position and uncertainty in the equilibrated beach. • Notch designs should reflect the direction and magnitude of net longshore sediment transport. [ABSTRACT FROM AUTHOR]

In this work, a new numerical model for cross-shore beach profile evolution, IH2VOF-SED, is developed. It consists in the bidirectional coupling of a 2D RANS hydrodynamic solver and a sediment transport module. The resulting model is extensively validated against three benchmark cases at different scales, attending to the hydrodynamics, bottom shear stress and bathymetry evolution. Comparisons between experimental and numerical results show a good agreement for both the flow variables and the seabed evolution in all the validation cases without making use of calibration parameters. Additionally, the qualitative analysis of the results is in accordance with previous experimental observations of sediment transport induced by breaking waves. The computational cost is greatly reduced to about 1/10 of other available RANS models. As a novel aspect regarding RANS models, the model is able to simulate the swash zone and changes in the position of the coastline. A good compromise between precision and computational cost is achieved, allowing for an in-depth analysis of the processes leading to the cross-shore profile evolution. • A new, efficient RANS model for cross-shore beach morphodynamics is presented. • It includes bedload and suspended sediment transport and the effect of landslides. • The hydrodynamic and sediment transport features are validated at different scales. • The model is able to reproduce the evolution of the beach profile accurately. • The computational cost is 10 times lower than that associated with other RANS models. [ABSTRACT FROM AUTHOR]

Increasing pressures on coastal environments induced by sea level rise and coastal squeeze has meant that tracking the morphological evolution of sedimentary coasts from the last known survey, pre-empting storm impacts and forecasting potential beach recovery following extreme events is of substantial and increasing societal importance. Equilibrium models for forecasting coastal evolution have figured prominently in the literature in the past two decades and show a strong potential for fulfilling this societal need. In particular some very skilful shoreline evolution models have been proposed based on equilibrium concepts. These models are stable, simple and permit long-term (O(10) years) predictions of coastal change. However, equilibrium models are typically highly empirical and in many cases do not consider explicitly the impact of dynamic sea level, which is modulated by tides, surge and global sea level rise. Equilibrium-based models of shoreline evolution have shown particular promise, but these models generally do not consider the role of the sub- and supra-tidal morphology on coastal evolution (e.g. the importance of coastal dune systems). This contribution presents a new model for For ecasting C oastal E volution (ForCE), which addresses these issues. The model algorithm adopts a reduced complexity but fundamentally physics-based approach, whilst maintaining equilibrium principles. Unlike, most prior models, the sub- and supra-tidal areas are represented explicitly in the model, as are sea level variations. Sediment transport is equated directly with the disequilibrium in wave energy dissipation flux, leading to a sediment transport formulation that negates the normal intermediate step of computing surfzone currents, generally required in process models. Two components of sediment transport are considered: The first is forced by the turbulent kinetic energy associated with wave breaking and the second diffusive term, is related to a sea bed-slope disequilibrium. The first component perturbs the equilibrium profile and dominates in the surfzone, whilst that latter component plays an important role in beach recovery. Equations are developed for a depth-averaged, beach profile model, assuming longshore uniformity. These computational efficient and stable equations facilitate long forecasts (>decade) and easy comparisons with a field data at cross-shore transport dominated field sites. At the test field site, the model is capable of reproducing qualitative observations of nearshore sand-bar dynamics and quantitative comparisons with measured coastal state indicators including both the shoreline displacement (r = 0.90, N.M.S.E. = 0.145) and intertidal beach volume (r = 0.87). • Days to decades prediction of coastal evolution • Accurate predictions of storm erosion & post-storm beach recovery • Skilful long-term prediction of beach volume and shoreline change & bar-dynamics • Explicit consideration sub- and supra-tidal topography & water level • Stable, efficient, equilibrium model suitable for longterm probabilistic forecasts [ABSTRACT FROM AUTHOR]

In sandy environments, like the beach-dune system, buildings not only affect the airflow, but also the aeolian sediment transport in their surroundings. In this study, we determine how the horizontal size of sediment deposition patterns around buildings depends on the building's dimensions. Four one-day experiments were conducted at the beach using box-shaped scale models. We tested 32 building geometries, where scale model height, width and length ranged between 0.3 and 2.0 m. The deposition patterns were substantial in size: the total length and width of the deposition area were up to an order of magnitude larger than the horizontal building dimensions. It was found that the size of upwind and downwind deposition patterns depended more on the building width perpendicular to the wind direction (w), than on the building height (h). Building length had little influence. Especially the combined effect of w and h correlated well with horizontal deposition size. This is expressed in a new scaling length B for deposition around buildings, with B = w 2 / 3 · h 1 / 3. As a first validation, the spatial dimensions of the initial deposition patterns observed around a scale model of 2.5 × 12 × 2.5 m, placed at the beach for five weeks, showed good agreement with those predicted based on B. • Outdoor scale experiments successfully captured aeolian sand dynamics. • Horizontal deposition dimensions can be ten times larger than the building dimensions. • Building width and height determine the horizontal size of deposition patterns. • A characteristic building length scale links building size to aeolian deposition size. [ABSTRACT FROM AUTHOR]

A non-hydrostatic phase-resolving numerical model (SWASH) is used to investigate the wave-driven nearshore hydrodynamics corresponding to new observations from a three-dimensional physical model in a wave basin. In the physical model, waves from a passing storm are simulated by varying the energy and duration of waves generated by a paddle over time and the beach morphology is surveyed in high spatial-resolution using a 3D laser scanner after each segment of the storm. An oblique incident wave angle introduces spatially variability in wave energy along the beach and results in morphologic differences during the storm, with active transport of beach sand by the wave-driven circulation. SWASH is validated using wave and current observations at each stage of the storm, indicating low root-mean-squared errors between model results and wave measurements, where the high-resolution model is able to predict wave shoaling, breaking and generation of the alongshore current. Model-data agreement is not as high for the velocity, suggesting spatial variability in bottom friction and horizontal mixing, and evolution of the bed in the physical model, could explain the differences. The detailed numerical model results indicate that the alongshore current is generated by wave breaking in the nearshore zone, and it increases in speed across a wider surf zone for increasing wave energy during the storm. This is associated with a bottom shear stress that exceeds the critical bed shear stress, with the potential to initiate motion and transport sediment in agreement with the experimental observations. • A physical model is implemented in a wave basin with a long and steep sandy beach. • Wave energy is varied over time to simulate a passing storm. • Wave breaking generates an alongshore current that induces morphologic change. • Phase-resolving simulations of nearshore hydrodynamics are run for storm phases. • Results improve understanding of nearshore circulation and bed shear stress. [ABSTRACT FROM AUTHOR]