Search

In recent years, there has been renewed interest in the "old" average of normals concept, now generally referred to as moving average quality control (MA QC) or patient-based real-time quality control (PBRTQC). However, there are some controversies regarding PBRTQC which this review aims to address while also indicating the current status of PBRTQC. This review gives the background of certain newly described optimization and validation methods. It also indicates how QC plans incorporating PBRTQC can be designed for greater effectiveness and/or (cost) efficiency. Furthermore, it discusses controversies regarding the complexity of obtaining PBRTQC settings, the replacement of iQC, and software functionality requirements. Finally, it presents evidence of the added value and practicability of PBRTQC. Recent developments in, and availability of, simulation methods to optimize and validate laboratory-specific PBRTQC procedures have enabled medical laboratories to implement PBRTQC in their daily practice. Furthermore, these methods have made it possible to demonstrate the practicability and added value of PBRTQC by means of two prospective "clinical" studies and other investigations. Although internal QC will remain an essential part of any QC plan, applying PBRTQC can now significantly improve its performance and (cost) efficiency. [ABSTRACT FROM AUTHOR]

Therapeutic drug monitoring (TDM) plays a crucial role in personalized medicine. It helps clinicians to tailor drug dosage for optimized therapy through understanding the underlying complex pharmacokinetics and pharmacodynamics. Conventional, non-continuous TDM fails to provide real-time information, which is particularly important for the initial phase of immunosuppressant therapy, e.g., with cyclosporine (CsA) and mycophenolic acid (MPA). We analyzed the time course over 8 h of total and free of immunosuppressive drug (CsA and MPA) concentrations measured by liquid chromatography-tandem mass spectrometry (LC-MS/MS) in 16 kidney transplant patients. Besides repeated blood sampling, intravenous microdialysis was used for continuous sampling. Free drug concentrations were determined from ultracentrifuged EDTA-plasma (UC) and compared with the drug concentrations in the respective microdialysate (µD). µDs were additionally analyzed for free CsA using a novel immunosensor chip integrated into a fluorescence detection platform. The potential of microdialysis coupled with an optical immunosensor for the TDM of immunosuppressants was assessed. Using LC-MS/MS, the free concentrations of CsA (fCsA) and MPA (fMPA) were detectable and the time courses of total and free CsA comparable. fCsA and fMPA and area-under-the-curves (AUCs) in µDs correlated well with those determined in UCs (r≥0.79 and r≥0.88, respectively). Moreover, fCsA in µDs measured with the immunosensor correlated clearly with those determined by LC-MS/MS (r=0.82). The new microdialysis-supported immunosensor allows real-time analysis of immunosuppressants and tailor-made dosing according to the AUC concept. It readily lends itself to future applications as minimally invasive and continuous near-patient TDM. [ABSTRACT FROM AUTHOR]

Patient-based real-time quality control (PBRTQC) is a laboratory tool for monitoring the performance of the testing process. It includes well-established procedures like Bull's algorithm, average of nomals, moving median, moving average (MA) and exponentially (weighted) MAs. Following the setup and optimization processes, a key step prior to the routine implementation of PBRTQC is the verification and documentation of the performance of the PBRTQC as part of the laboratory quality system. This verification process should provide a realistic representation of the performance of the PBRTQC in the environment it is being implemented in, to allow proper risk assessment by laboratory practitioners. This document focuses on the recommendation on performance verification of PBRTQC prior to implementation. [ABSTRACT FROM AUTHOR]

Background: Determination of blood glucose concentration is one of the most important measurements in clinical chemistry worldwide. Analyzers in central laboratories (CL) and point-of-care tests (POCT) are both frequently used. In Germany, regular participation in external quality assessment (EQA) schemes is mandatory for laboratories performing glucose testing. Methods: Glucose testing data from the two German EQAs "Reference Institute for Bioanalytics" (RfB) and "INSTAND -- Gesellschaft zur Förderung der Qualitätssicherung in medizinischen Laboratorien" (Instand) were analyzed from 2012 to 2016. Multivariable odds ratios (OR) for the probability to reach a "good" result were calculated. Imprecision and bias were determined and clinical risk of measurement errors estimated. Results: The device employed was the most important variable required for a "good" performance in all EQAs. Additional participation in an EQA for CL automated analyzers improved performance in POCT EQAs. The reciprocal effect was less pronounced. New participants performed worse than experienced participants especially in CL EQAs. Imprecision was generally smaller for CL, but some POCT devices reached a comparable performance. Large lot-to-lot differences occurred in over 10% of analyzed cases. We propose the "bias budget" as a new metric to express the maximum allowable bias that still carries acceptable medical risk. Bias budgets were smallest and clinical risks of errors greatest in the low range of measurement 60-115 mg/dL (3.3-6.4 mmol/L) for most devices. Conclusions: EQAs help to maintain high analytical performances. They generate important data that serve as the foundation for learning and improvement in the laboratory healthcare system. [ABSTRACT FROM AUTHOR]

Background: Method evaluation of new assays for the detection of antiphospholipid antibodies (aPL) such as anti-cardiolipin (aCL) or anti-β2-glycoprotein I (aβ2-GPI) is challenging, as no internationally accepted reference material is available yet. Besides a lack of standardization, unacceptable inter-laboratory comparability of established tests is regularly observed. Owing to the absence of a commonly accepted reference standard, the evaluation of two research surface plasmon resonance (SPR) biosensor assays was performed using statistical methods from latent class analysis (LCA). Methods: aCL and aβ2-GPI IgG and IgM were measured in sera from 63 antiphospholipid syndrome patients, fulfilling the Sydney criteria, and in 34 healthy controls with four commercial assays. LCA was performed on the results and sera were assigned to the antibody-positive or antibody- negative group. Sera were subsequently evaluated in the SPR assays for aCL and aβ2-GPI. Optimal cutoffs and diagnostic performances of the research systems were established employing the LCA-derived gold standard. Results: With area under the curve results of 0.96 and 0.89 for the detection of aCL and aβ2-GPI, the research SPR assays discriminated well between antibody-positive and antibody-negative sera. Their sensitivities and specificities were comparable to the investigated commercial immunoassays. Conclusions: SPR assays are a suitable tool for the detection of aCL and aβ2-GPI with diagnostic performances not different from currently available commercial tests. LCA enabled the calculation of sensitivities and specificities for aPL assays in absence of a reference standard. [ABSTRACT FROM AUTHOR]