Search

Background. Marginal bone loss (MBL) represents an important indicator of peri-implant health and the measure of its level is considered a determining factor in the evaluation of the quality of survival. Aim of this study is to compare radiographic changes in the fractal and mesial/distal vertical dimensions of peri-implant trabecular bone of dental implants with a laser-ablated micron-scale modication (LAM) of collar surface after a 5-year follow-up period. Materials and methods. Thirty-four implants with LAM of collar surface (test group = TG) and 31 implants without LAM of collar surface (control group = CG) were placed in 45 non-smoking, periodontally healthy patients. Fractal and vertical dimensions of periimplant trabecular bone were measured by comparing radiographs taken immediately after prosthesis delivery with those taken 3 years and 5 years after functional loading. Results. At the end of the 5-year follow-up, the MBL in the TG was 0.87±0.21 and 0.75±0.25 mm at the mesial and distal aspects, respectively, while a MBL of 2.05±0.25 mm at the mesial aspect and 2.01±0.34 mm at the distal site was recorded in the CG. A statistically significant difference was noted. In the TG the mean fractal dimension before loading was 1.4213±0.0525. It increased significantly to 1.4329±0.0479 at 3 years after loading and remained almost stable at 5 years after loading (1.4327±0.0291). In the CG the mean fractal dimension before loading was 1.4119±0.0414. It increased significantly to 1.4282±0.0324 at 3 years after loading and decreased significantly to 1.4111±0.0624 at 5 years after loading. At the end of the follow-up, differences between both study groups were statistically significant. Conclusions. The increased fractal dimension and the reduced MBL around TG implants after 5 years of functional loading indicates a positive effect of a laser-ablated micron-scale modication of collar surface on peri-implant trabecular bone remodeling. [ABSTRACT FROM AUTHOR]

Aims.This study aims to estimate the microbial presence on the surface of different brand new NiTi endodontic instruments for clinical use. Materials and Methods. Eleven different types of NiTi rotary endodontic instruments, obtained from their fresh opened original packages, were assigned to three different groups, according to packaging type and sterilization and tested for bacterial contamination. Isolated bacteria were identified by using standard microbiological methods and then counted. Differences observed in groups were analyzed statistically by using the one-way analysis of variance (ANOVA) for dependent samples and the Tukey HSD post hoc test. Results. Statistical differences were found between instruments delivered in plastic boxes which bacterial count resulted higher than those obtained from instruments delivered in blisters (p<0.01). Conclusions. Some brand new endodontic instruments showed degrees of bacterial contamination that both quantitatively and qualitatively deserve to be considered in clinical procedures. [ABSTRACT FROM AUTHOR]

Objectives. Aim of the present study was twofold. First, to evaluate in vitro, the performance of two different NiTi rotary instruments in one molar case; then, to evaluate their resistance to cyclic fatigue, compared to new ones. Materials and Methods. 25 ProTaper Next (PTN) nickel-titanium (NiTi) instruments (Maillefer-Dentsply, Baillagues, CH) for each of the following two sizes: X1 (17.04) and X2 (25.06) were randomly divided into two groups. The first group (n = 10) immediately underwent to a cyclic fatigue test. The second group (n = 15) was initially used to prepare 15 extracted molar teeth and then subjected to a cyclic fatigue test. Same was done for 25 Horizen (HZ) instruments (Kerr Endodontics, Orange, Ca) for each of the following two sizes: 20.04 and 25.06. Instruments were rotated in curved artificial canal until fracture occurred and times to fracture were recorded. All data were collected and statistically analyzed using a variance test (confidence interval CI = 95%). Results. HZ reached working length more rapidly than PTN, and with less deformations. For the fatigue tests, all the new instruments were significantly more resistant than the used ones. The HZ instruments were significantly more resistant in all sizes than PTN, both when new and used instruments were tested. Conclusions. Since in previous studies ProTaper Next demonstrated a better resistance to cyclic fatigue than most of nickel-titanium instruments, Horizen's performance put them in a high rank amongst the most resistant nickel-titanium rotary instruments. [ABSTRACT FROM AUTHOR]

Background: Marginal bone loss (MBL) represents an important indicator of peri-implant health and the measure of its level is considered a determining factor in the evaluation of the quality of survival. Aim of this study is to compare radiographic changes in the fractal and mesial/distal vertical dimensions of peri-implant trabecular bone of dental implants with a laser-ablated micron-scale modication (LAM) of collar surface after a 5-year follow-up period., Materials and Methods: Thirty-four implants with LAM of collar surface (test group = TG) and 31 implants without LAM of collar surface (control group = CG) were placed in 45 non-smoking, periodontally healthy patients. Fractal and vertical dimensions of peri-implant trabecular bone were measured by comparing radiographs taken immediately after prosthesis delivery with those taken 3 years and 5 years after functional loading., Result: At the end of the 5-year follow-up, the MBL in the TG was 0.87±0.21 and 0.75±0.25 mm at the mesial and distal aspects, respectively, while a MBL of 2.05±0.25 mm at the mesial aspect and 2.01±0.34 mm at the distal site was recorded in the CG. A statistically significant difference was noted. In the TG the mean fractal dimension before loading was 1.4213±0.0525. It increased significantly to 1.4329±0.0479 at 3 years after loading and remained almost stable at 5 years after loading (1.4327±0.0291). In the CG the mean fractal dimension before loading was 1.4119±0.0414. It increased significantly to 1.4282±0.0324 at 3 years after loading and decreased significantly to 1.4111±0.0624 at 5 years after loading. At the end of the follow-up, differences between both study groups were statistically significant., Conclusion: The increased fractal dimension and the reduced MBL around TG implants after 5 years of functional loading indicates a positive effect of a laser-ablated micron-scale modication of collar surface on peri-implant trabecular bone remodeling.

Aims: This study aims to estimate the microbial presence on the surface of different brand new NiTi endodontic instruments for clinical use., Material and Methods: Eleven different types of NiTi rotary endodontic instruments, obtained from their fresh opened original packages, were assigned to three different groups, according to packaging type and sterilization and tested for bacterial contamination. Isolated bacteria were identified by using standard microbiological methods and then counted. Differences observed in groups were analyzed statistically by using the one-way analysis of variance (ANOVA) for dependent samples and the Tukey HSD post hoc test., Results: Statistical differences were found between instruments delivered in plastic boxes which bacterial count resulted higher than those obtained from instruments delivered in blisters (p<0.01)., Conclusions: Some brand new endodontic instruments showed degrees of bacterial contamination that both quantitatively and qualitatively deserve to be considered in clinical procedures.

Objectives: Aim of the present study was twofold. First, to evaluate in vitro, the performance of two different NiTi rotary instruments in one molar case; then, to evaluate their resistance to cyclic fatigue, compared to new ones., Material and Methods: 25 ProTaper Next (PTN) nickel-titanium (NiTi) instruments (Maillefer-Dentsply, Baillagues, CH) for each of the following two sizes: X1 (17.04 ) and X2 (25.06) were randomly divided into two groups. The first group (n = 10) immediately under- went to a cyclic fatigue test. The second group (n = 15) was initially used to prepare 15 extracted molar teeth and then subjected to a cyclic fatigue test. Same was done for 25 Horizen (HZ) instruments (Kerr Endodontics, Orange, Ca) for each of the following two sizes: 20.04 and 25.06. Instruments were rotated in curved artificial canal until fracture occurred and times to fracture were recorded. All data were collected and statistically analyzed using a variance test (confidence interval CI = 95%)., Results: HZ reached working length more rapidly than PTN, and with less deformations. For the fatigue tests, all the new instruments were significantly more resistant than the used ones. The HZ instru- ments were significantly more resistant in all sizes than PTN, both when new and used instruments were tested., Conclusions: Since in previous studies ProTaper Next demonstra- ted a better resistance to cyclic fatigue than most of nickel-titanium instruments, Horizen's performance put them in a high rank amongst the most resistant nickel-titanium rotary instruments.

Objectives: Previous studies showed that motor motions play an important role in determining apical extrusion of debris. Therefore a new clinical motion (MIMERACI) has been proposed. The basic idea is to progress slowly (1mm advancement), and after each 1mm, to remove the instrument from the canal, clean flutes and irrigate. The aim of the study was to prove whether the clinical use of MIMERACI technique would influence or not postoperative pain., Materials and Methods: 100 teeth requesting endodontic treatment were selected for the study and divided into two similar groups based on anatomy, pre-operative symptoms and vitality, presence or absence of periapical lesion. All teeth were shaped, cleaned and obturated by the same operator, using the same NiTi instruments. The only difference between the two groups was the instrumentation technique: tradional (group A) vs MIMERACI (group B). Assessment of postoperative pain was performed 3 days after treatment. Presence, absence and degree of pain were recorded with a visual analogue scale (VAS), validated in previous studies. Collected data statistically analyzed using one-way ANOVA post hoc Tukey test., Results: For VAS pain scores MIMERACI technique showed significantly better results than group A (p=0,031). Overall, both incidence and intensity of symptoms were significantly lower. Flare ups occurred in 3 patients, but none treated with the MIMERACI Technique., Conclusions: Since extruded debris can elicit more postoperative pain, results obtained by using MIMERACI technique are probably due to many factors: better mechanical removal and less production of debris and more efficient irrigation during instrumentation.

Hypertensive therapy based on diuretics is time-honored. Thiazides represent the most commonly used class of diuretics for uncomplicated hypertension because of economic motivations, their tolerance and efficacy both as monotherapy and in combined treatment with other agents. Clinical studies using diuretics and beta-blockers reported that thiazide treatment prevents the development of malignant hypertension, renal and heart failure, hypertensive retinopathy, and reduces in five years overall mortality of 33%, cardiovascular mortality of 41%, fatal and non-fatal cerebrovascular events of 51% and the risk of coronary events of 15%. The less than expected risk reduction of cardiovascular disease raised many concerns about the possibility of adverse biochemical changes of thiazides through their effects on lipids, electrolytes and glucose metabolism. However, the real clinical significance of these metabolic effects remains actually uncertain and needs further investigation. The treatment of the hypertensive patient cannot be adequately managed using a merely adjunctive step-care criterium. Hypertensive subjects have different haemodynamic, metabolic and endocrine disorders and a tailored treatment should consider the different activities of the various agents as monotherapy or in association in the single patient.