Search

Background: Imaging of the flow convergence region (FCR) proximal to a regurgitant orifice has been shown to provide a method for quantifying the regurgitant flow rate. According to the continuity principle, the FCR is constituted by concentric hemispheric isovelocity surfaces centered at the orifice. The flow rate is constant across all isovelocity surfaces and equals the flow rate through the orifice. For any isovelocity surface the flow rate (Q) is given by: Q = 2 pi r2 Vr, where 2 pi r2 is the area of the hemisphere and Vr is the velocity at the radial distance (r) from the orifice., Methods and Results: We studied 52 consecutive patients with mitral regurgitation (mean age, 49 years; age range, 21-66 years) verified by left ventricular angiography using color flow mapping. The FCR r was measured as the distance between the first aliasing limit--at a Nyquist limit obtained by zero-shifting the velocity cutoff to 38 cm/sec--and the regurgitant orifice. Seven patients without evidence of an FCR had only grade 1+ mitral regurgitation angiographically. There was a significant relation between the Doppler-derived maximal instantaneous regurgitant flow rate and the angiographic degree of mitral regurgitation in the other patients (rs = 0.91, p less than 0.001). The regurgitant flow rate by Doppler also correlated with the angiographic regurgitant volume (r = 0.93, SEE = 123 ml/sec) in the 15 patients in normal sinus rhythm and without other regurgitant lesions in whom it could be measured. The correlation between regurgitant jet area within the left atrium and the angiographic grade was only fair (rs = 0.75, p less than 0.001)., Conclusions: Color flow Doppler provides new velocity information about the proximal FCR in patients with mitral regurgitation. According to the continuity principle, the maximal instantaneous regurgitant flow rate, obtained with the FCR method, may provide a quantitative estimate of the severity of mitral regurgitation, which is relatively independent of technical factors.

While color Doppler flow mapping has yielded a quick and relatively sensitive method for visualizing the turbulent jets generated in valvular insufficiency, quantification of the degree of valvular insufficiency has been limited by the dependence of visualization of turbulent jets on hemodynamic as well as instrument-related factors. Color Doppler flow imaging, however, does have the capability of reliably showing the spatial relations of laminar flows. An area where flow accelerates proximal to a regurgitant orifice is commonly visualized on the left ventricular side of a mitral regurgitant orifice, especially when imaging is performed with high gain and a low pulse repetition frequency. This area of flow convergence, where the flow stream narrows symmetrically, can be quantified because velocity and the flow cross-sectional area change in inverse proportion along streamlines centered at the orifice. In this study, a gravity-driven constant-flow system with five sharp-edged diaphragm orifices (ranging from 2.9 to 12 mm in diameter) was imaged both parallel and perpendicular to the direction of flow through the orifice. Color Doppler flow images were produced by zero shifting so that the abrupt change in display color occurred at different velocities. This "aliasing boundary" with a known velocity and a measurable radial distance from the center of the orifice was used to determine an isovelocity hemisphere such that flow rate through the orifice was calculated as 2 pi r2 x Vr, where r is the radial distance from the center of the orifice to the color change and Vr is the velocity at which the color change was noted. Using Vr values from 54 to 14 cm/sec obtained with a 3.75-MHz transducer and from 75 to 18 cm/sec obtained with a 2.5-MHz transducer, we calculated flow rates and found them to correlate with measured flow rates (r = 0.94-0.99). The slope of the regression line was closest to unity when the lowest Vr and the correspondingly largest r were used in the calculation. The flow rates estimated from color Doppler flow imaging could also be used in conjunction with continuous-wave Doppler measurements of the maximal velocity of flow through the orifice to calculate orifice areas (r = 0.75-0.96 correlation with measured areas).(ABSTRACT TRUNCATED AT 250 WORDS)

In this study, we explored the use of continuous wave Doppler-echocardiography guided by color Doppler flow-mapping as a method for noninvasively calculating the rate of pressure rise (RPR) in the left ventricle. Continuous wave Doppler determination of the velocities in mitral regurgitant jets allows calculation of instantaneous pressure gradients between the left ventricle and the left atrium. Left atrial pressure variations in early systole can be considered negligible; therefore, the rising segment of the mitral regurgitation velocity curve should reflect left ventricular pressure increase. We studied 50 patients (mean age, 51 years; range, 25-66 years) in normal sinus rhythm with color Doppler-proven mitral regurgitation and compared the Doppler-derived left ventricular RPR with peak dP/dt obtained at cardiac catheterization. Doppler studies were performed simultaneously with cardiac catheterization in 11 patients and immediately before in the remaining cases. Two points were arbitrarily selected on the steepest rising segment of the continuous wave mitral regurgitation velocity curve (point A, 1 m/sec, point B, 3 m/sec), and the time interval (t) between them was measured. Following the Bernoulli relation, the pressure rise between points A and B is 32 mm Hg (4vB2-4vA2) and the RPR is 32 mm Hg/t. Results showed a linear correlation between the Doppler RPR and peak dP/dt (r = 0.87, SEE = 316 mm Hg/sec). The RPR in the left ventricle can be derived from the continuous wave Doppler mitral regurgitation velocity curve.