Search

A capillary electrophoretic (CE) method for the determination of organic acids in the low ppm range is described. The buffer consisted of 5 mM 2,6-pyridinedicarboxylic acid and 0.5 mM cetyltrimethylammonium bromide, pH 5.6. The former served as background electrolyte for indirect UV detection at 200 nm, whereas the latter was used to reverse electroosmotic flow. In

A packing procedure was adopted for capillary electrochromatography (CEC) that produces capillary columns with high separation efficiencies. The columns were fully packed, 50 cm long, with UV detection being performed through the packed section 30 cm from the inlet end. The CEC experiments were run at ambient pressure, with no additional pressure applied to the ends of the column. The stationary phase (octadecyl silica (ODS), 5 μm) promoted a high velocity electroosmotic flow (EOF), enabling rapid and efficient separation of a hydrocarbon test mixture. Some 1-phenyl-3-methyl-5-pyrazolone (PMP) derivatives of mono- and disaccharides were baseline separated, using a 5 mM NaH2PO4 in 80% acetonitrile and 20% water (v/v) buffer solution. CEC shows promise for future applications in carbohydrate analysis.

Liquid chromatographic method and micellar electrokinetic chromatographic method were optimized for determination of atrazine, desethylatrazine, desisopropylatrazine, hydroxyatrazine and their polar degradation products in solutions with humic acid without previous sample preparation step. Reversed-phase HPLC method was satisfactory in terms of repeatability and detection limits, which were ± 1.7–12.5% (RSD) and 0.1–0.5 mg L−1, respectively. However, the most polar products could not be separated from the front peak pertaining to humic acid. With MEKC, excellent separation of both chloro and hydroxy degradation products and parent compounds was achieved in a single analysis, and possible interferences of humic acid were successfully avoided by its retention at the anode. Drawbacks were detection limits, estimated to be 2–4 mg L−1, and RSD of the migration times was 20% compared to 0.5% with HPLC method. HPLC method was used to monitor degradation of atrazine and its first degradation products in the presence of humic acids, and MEKC was used for confirmation purposes.