Search

A facile method for preparing hierarchical carbon composites that contain activated carbon (AC), carbon nanospheres (CNSs), and carbon nanotubes (CNTs) for use as the electrode material in supercapacitors (SCs) was developed. The CNS/CNT network enabled the formation of three-dimensional conducting pathways within the highly porous AC matrix, effectively reducing the internal resistance of an SC electrode. The specific capacitance, cyclability, voltage window, temperature profile during charging/discharging, leakage current, gas evolution, and self-discharge of the fabricated SCs were systematically investigated and the optimal CNS/CNT ratio was determined. A 2.5 V floating aging test at 70 °C was performed on SCs made with various hierarchical carbon electrodes. Electrochemical impedance spectroscopy, postmortem electron microscopy, Raman spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy analyses were conducted to examine the electrode aging behavior. A hierarchical carbon architecture with an appropriate AC/CNS/CNT constituent ratio could significantly improve charge-discharge performance, increase cell reliability, and decrease the aging-related degradation rate.

SnO2 @CMK-8 composite, a highly promising anode for Na-ion batteries (NIBs), was incorporated with polyvinylidene difluoride (PVDF), sodium carboxymethylcellulose (NaCMC), sodium polyacrylate (NaPAA), and NaCMC/NaPAA mixed binders to optimize the electrode sodiation/desodiation properties. Synergistic effects between NaCMC and NaPAA led to the formation of an effective protective film on the electrode. This coating layer not only increased the charge-discharge Coulombic efficiency, suppressing the accumulation of solid-electrolyte interphases, but also kept the SnO2 nanoparticles in the CMK-8 matrix, preventing the agglomeration and removal of oxide upon cycling. The adhesion strength and stability towards the electrolyte of the binders were evaluated. In addition, the charge-transfer resistance and apparent Na+ diffusion of the SnO2 @CMK-8 electrodes with various binders were examined and post-mortem analyses were conducted. With NaCMC/NaPAA binder, exceptional electrode capacities of 850 and 425 mAh g-1 were obtained at charge-discharge rates of 20 and 2000 mA g-1 , respectively. After 300 cycles, 90 % capacity retention was achieved. The thermal reactivity of the sodiated electrodes was studied by using differential scanning calorimetry. The binder effects on NIB safety, in terms of thermal runaway, are discussed.

To realize the sustainability of Na-ion batteries (NIBs) for large-scale energy storage applications, a resource-abundant and cost-effective anode material is required. In this study, sugarcane bagasse (SB), one of the most abundant types of biowaste, is chosen as the carbon precursor to produce a hard carbon (HC) anode for NIBs. SB has a great balance of cellulose, hemicellulose, and lignin, which prevents full graphitization of the pyrolyzed carbon but ensures a sufficiently ordered carbon structure for Na+ transport. Compared with HC derived from waste apples, which are pectin-rich and have less cellulose than SB, SB-derived HC (SB-HC) has fewer defects and a lower oxygen content. SB-HC thus has a higher first-cycle sodiation/desodiation coulombic efficiency and better cycling stability. In addition, SB-HC has a unique flake-like morphology, which can shorten the Na+ diffusion length, and higher electronic conductivity (owing to more sp2 -hybridized carbon), resulting in superior high-rate charge-discharge performance to apple-derived HC. The effects of pyrolysis temperature on the material characteristics and electrochemical properties, evaluated by using chronopotentiometry, cyclic voltammetry, and electrochemical impedance spectroscopy, are systematically investigated for both kinds of HC.

Ionic-liquid (IL) electrolytes, characterized by large potential windows, intrinsic ionic conductivity, low environmental hazard, and high safety, are used for micropore- and mesopore-rich activated-carbon (ACmicro and ACmeso ) supercapacitors. IL electrolytes consisting of various cations [1-ethyl-3-methylimidazolium (EMI+ ), N-propyl-N-methylpyrrolidinium (PMP+ ), and N-butyl-N-methylpyrrolidinium (BMP+ )] and various anions [bis(trifluoromethylsulfonyl)imide (TFSI- ), BF4- , and bis(fluorosulfonyl)imide (FSI- )] are investigated. The electrolyte conductivity, viscosity, and ion transport properties at the ACmicro and ACmeso electrodes are studied. In addition, the capacitance, rate capability, and cycling stability of the two types of AC electrodes are systematically examined and post-mortem material analyses are conducted. The effects of IL composition on the charge-discharge capacitances of the ACmicro electrodes are more pronounced than those for the ACmeso electrodes. The FSI-based IL electrolytes, for which electrochemical properties are cation dependent, are found to be promising. Incorporating EMI+ with FSI- results in a low electrolyte viscosity and a fast ion transport, giving rise to optimized electrode capacitance and rate capability. Replacing EMI+ with PMP+ increases the cell voltage (to 3.5 V) and maximum energy density (to 42 Wh kg-1 ) of the ACmicro cell at the cost of cycling stability.

SnO