Search

The photolysis of simulating low concentration of hydrogen sulfide malodorous gas was studied under UV irradiation emitted by self-made microwave discharge electrodeless lamps (i.e. microwave UV electrodeless mercury lamp (185/253.7 nm) and iodine lamp (178.3/180.1/183/184.4/187.6/206.2 nm)). Experiments results showed that the removal efficiency (eta H2S) of hydrogen sulfide was decreased with increasing initial H2S concentration and increased slightly with gas residence time; H2S removal efficiency was decreased dramatically with enlarged pipe diameter. Under the experimental conditions with pipe diameter of 36 mm, gas flow rate of 0.42 standard l s(-1), eta H2S was 52% with initial H2S concentration of 19.5 mg m(-3) by microwave mercury lamp, the absolute removal amount (ARA) was 4.30 microg s(-1), and energy yield (EY) was 77.3 mg kW h(-1); eta H2S was 56% with initial H2S concentration of 18.9 mg m(-3) by microwave iodine lamp, the ARA was 4.48 microg s(-1), and the EY was 80.5mg kW h(-1). The main photolysis product was confirmed to be SO4(2-) with IC.

A combined plasma photolysis (CPP) reactor that utilizes a dielectric barrier discharge (DBD) plasma and 207 nm UV radiation from discharge-driven KrBr* excimers was designed and constructed. Gas streams containing CS2 were treated with stand-alone DBD and CPP at atmospheric pressure. In comparison to DBD, CPP greatly enhanced the removal efficiency at the same applied voltage, waste gas concentration and gas residence time. Thus the applied voltage could be reduced to a certain extent in the plasma processing of industrial wastes. Influences of the KrBr* radiation, inlet CS2 concentration and gas residence time on CS2 removal by CPP were also studied. In addition, the likely reaction mechanisms for the removal of CS2 by CPP are suggested based on the byproducts analysis. The enhanced removal efficiency and reaction mechanisms implied that the CPP process would probably be suitable for the removal of a large number of gaseous pollutants.