Search

Biodegradable plastics (BPs) have seen a continuous increase in annual production and application due to their environmentally sustainable characteristics. However, research on the formation of disinfection byproducts (DBPs) from biodegradable microplastics (BMPs) during chlorination is limited, and the effects of aqueous solution chemistry on this process have yet to be explored. Therefore, two biodegradable microplastics, polylactic acid (PLA) and polybutylene adipate terephthalate (PBAT), were investigated in this study to examine the changes in their physicochemical properties before and after chlorination, and the formation of DBPs under different environmental conditions. The results showed that PLA was more chlorine-responsive, and generated more DBPs. The pH converted some of the intermediates into more stable DBPs by affecting the concentration of HClO and base-catalyzed reactions, whereas ionic strength slightly reduced DBP concentration by ion adsorption and promoting the aggregation of BMPs. Finally, since PLA has a slightly greater volume of mesopores and micropores compared to PBAT, it may more effectively adsorb DBP precursors beyond natural organic matter (NOM), such as some anthropogenic pollutants, thus potentially decreasing the formation of chlorinated DBPs in surface water. This research explored the potentiality for DBP formation by BMPs under different water quality conditions during the disinfection process, which is useful for assessing the environmental hazards of BMPs. [Display omitted] • PLA yields more DBPs than PBAT with its porous structure and reactive ester bonds. • Rising pH converts DBP intermediates to stable DBPs. • NaCl may reduce DBP production by impacting BP reaction sites and agglomeration. • PLA might adsorb non-NOM DBP precursors in surface water to reduce DBP formation. [ABSTRACT FROM AUTHOR]

Increasing microplastic (MP) pollution, primarily from anthropogenic sources such as plastic film mulching, waste degradation, and agricultural practices, has emerged as a pressing global environmental concern. This review examines the direct and indirect effects of MPs on crops, both in isolation and in conjunction with other contaminants, to elucidate their combined toxicological impacts. Organic fertilizers predominantly contain 78.6% blue, 9.5% black, and 8.3% red MPs, while irrigation water in agroecosystems contains 66.2% white, 15.4% blue, and 8.1% black MPs, ranging from 0–1 mm to 4–5 mm in size. We elucidate five pivotal insights: Firstly, soil MPs exhibit affinity towards crop roots, seeds, and vascular systems, impeding water and nutrient uptake. Secondly, MPs induce oxidative stress in crops, disrupting vital metabolic processes. Thirdly, leachates from MPs elicit cytotoxic and genotoxic responses in crops. Fourthly, MPs disrupt soil biotic and abiotic dynamics, influencing water and nutrient availability for crops. Lastly, the cumulative effects of MPs and co-existing contaminants in agricultural soils detrimentally affect crop yield. Thus, we advocate agronomic interventions as practical remedies. These include biochar input, application of growth regulators, substitution of plastic mulch with crop residues, promotion of biological degradation, and encouragement of crop diversification. However, the efficacy of these measures varies based on MP type and dosage. As MP volumes increase, exploring alternative mitigation strategies such as bio-based plastics and environmentally friendly biotechnological solutions is imperative. Recognizing the persistence of plastics, policymakers should enact legislation favoring the mitigation and substitution of non-degradable materials with bio-derived or compostable alternatives. This review demonstrates the urgent need for collective efforts to alleviate MP pollution and emphasizes sustainable interventions for agricultural ecosystems. [Display omitted] • Microplastics (MPs) disrupt soil dynamics and impact crop yield. • MPs affect crop physiology, seed germination, and vascular systems. • MPs' leachates trigger cytotoxic and genotoxic responses in crops. • Coexistence of MPs and heavy metals alters soil-plant-microbe interactions. • Sustainable management practices mitigate MPs effects on agroecosystem. [ABSTRACT FROM AUTHOR]

The widespread presence of microplastics (MPs) in the air and their potential impact on human health underscore the pressing need to develop robust methods for quantifying their presence, particularly in the breathable fraction (<5 μm). In this study , Raman micro-spectroscopy (μRaman) was employed to assess the concentration of indoor airborne MPs >1 μm in four indoor environments (a meeting room, a workshop, and two apartments) under different levels of human activity. The indoor airborne MP concentration spanned between 58 and 684 MPs per cubic meter (MP m−3) (median 212 MP m−3, MPs/non-plastic ratio 0–1.6%), depending not only on the type and level of human activity, but also on the surface area and air circulation of the investigated locations. Additionally, we assessed in the same environments the filtration performance of a type IIR surgical facemask, which could overall retain 85.4 ± 3.9% of the MPs. We furthermore estimated a human MP intake from indoor air of 3415 ± 2881 MPs day−1 (mostly poly-amide MPs), which could be decreased to 283 ± 317 MPs day−1 using the surgical facemask. However, for the breathable fraction of MPs (1–5 μm), the efficiency of the surgical mask was reduced to 57.6%. [Display omitted] • Airborne MPs >1 μm were quantified in four indoor locations with μRaman. • Effect of human activity and surgical facemask was investigated. • MP concentration was 58–684 MP m−3 (median 212 MP m−3). • Only 57.6% of the 1–5 μm MP was filtered out by the surgical facemask. • Estimated MP intake: 3415 MPs day−1 (283 MPs day−1 with facemask). [ABSTRACT FROM AUTHOR]

Organic fertilizers have become a vector for the transport of microplastics (MPs), which pose human health concerns through the food chain. This study aimed to quantify and characterize MPs in eight different compost samples of various raw materials and their subsequent translocation to lettuce (Lacuta sativa) grown on contaminated composts. The results revealed that the MP abundance ranged from 3810 to 16530 MP/kg. Municipal solid waste compost (MSWC) had highest abundance (16082 ± 632 MP/kg), followed by leaf compost (LC) and organic compost (OC) (6299 ± 1011 and 3680 ± 419 MP/kg, respectively). MPs of <100 μm in size were most dominant in MSWC and LC. Fragments and fibers were the prevalent shape types, with white/transparent colored MPs being more abundant. Polyethylene (PE), polypropylene (PP) and polyethylene terephthalate (PET) were the dominant polymers. MPs accumulation in the lettuce leaves was greatest in the lettuce plants grown on MSWC, followed by those grown on LC and OC, indicating that MSWC grown lettuce is not suitable for human consumption. The decrease in the growth (leaf length, number of leaves, leaf fresh and weights) and physiological (membrane stability index, relative water contents) parameters of lettuce was in line with the trend of MP accumulations. Hence, it is highly important to regulate the plastic contents in compost because it is a threat to ecosystems and human health. [Display omitted] • Microplastics abundance in three compost types (organic, leaf, MSW) was analyzed. • Size <100 μm microplastics dominated in MSW compost and leaf compost. • Microplastics of shape (fragment, fiber), color (white), polymer (PP) dominated. • Lettuce leaves accumulated microplastics depending on their abundance in composts. [ABSTRACT FROM AUTHOR]

Plastic is widely used in agricultural applications, but its waste has an adverse environmental impact and a long-term detrimental effect. The development of biodegradable plastics for agricultural use is increasing to mitigate plastic waste. The most commonly used biodegradable plastic is poly(butylene adipate co-terephthalate)/poly(lactic acid) (PBAT/PLA) polymer. In this study, an analytical procedure based on dispersive liquid-liquid microextraction (DLLME) followed by gas chromatography-mass spectrometry (GC-MS) in combination with chemometrics has been optimized to assess the degradation level of PBAT/PLA films by monitoring their characteristic degradation products. Carboxylic acids (benzoic, phthalic, adipic, heptanoic, and octadecanoic acids) and 1,4-butanediol have been found to be potential markers of PBAT/PLA degradation. The DLLME-GC-MS analytical approach has been applied for the first time to assess the degradation efficiency of several microorganisms used as degradation accelerators of PBAT/PLA based on the assigned potential markers. This analytical strategy has shown higher sensitivity and precision than standard techniques, such as elemental analysis, allowing us to detect low degradation levels. [Display omitted] • PBAT/PLA degradation was assessed by DLLME with GC-MS. • Carboxylic acids and 1,4-butanediol were selected as PBAT/PLA degradation markers. • Aspergillus spp. and Penicillium spp. strains showed high PBAT/PLA degradation efficiency. [ABSTRACT FROM AUTHOR]

Bioplastics are considered sustainable alternatives to conventional microplastics which are recognized as a threat to terrestrial ecosystems. However, little is known about the potential ecotoxicological effects of bioplastics on soil fauna and ecosystems. The present study assessed the toxicity of microplastics [Polystyrene (PS), Polyethylene (PE)] and bioplastics [Polyvinyl alcohol (PVA), Sodium polyacrylate (NaPa) on a key soil fauna Oppia nitens , a soil oribatid mite, and investigated the ecological relevance of O. nitens avoidance response as a valuable tool for the risk assessment of contaminated soils such as the Superfund sites. Findings showed that the mites' net response indicated avoidance behavior such that in most cases as concentrations of micro- and bioplastics increased, so did the avoidance responses. The avoidance EC 50 endpoints showed PS < PE < PVA < NaPa, indicating higher deleterious effects of microplastics. High toxicity of PS in soils to O. nitens at EC 50 of 165 (±25) mg/kg compared to bioplastics and other known contaminants poses an enormous threat to soil. For bioplastics in this study, there were no significant avoidances at concentrations up to 16,200 mg/kg compared to PS and PE which showed avoidance responses at 300 and 9000 mg/kg respectively, implying that bioplastics might be relatively safer to soil mites compared to conventional microplastics. Also, results indicated that long-term heavy metal pollution such as in contaminated Superfund sites decreased microbial biomass; a useful bioindicator of soil pollution. Furthermore, O. nitens avoidance of heavy metals contaminated sites demonstrated the ecological relevance of avoidance response test when assessing the habitat integrity of contaminated soil. The present study further supports the inclusion of the oribatid mite, O. nitens in the ecological risk assessment of contaminants in soil. [Display omitted] • Reduced microbial biomass reported in Superfund heavy metal-contaminated sites. • O. nitens preference of contaminant-free soils poses risks to soil ecosystem services. • Soil mites tolerate bioplastics better than microplastics in standard artificial soil. • O. nitens avoidance of Superfund sites support its relevance in soil risk assessments. [ABSTRACT FROM AUTHOR]

As the adverse effects of using plastics and perfluorinated alkyl substances become more apparent, there is a growing need for sustainable hydrophobic products. Cellulose and its derivatives are the most abundant and widely used polymers, and cellulose-based products have great potential in industries where plastics and other hydrophobic polymers are used, such as stain-resistant fabrics, food packaging, and oil-water separation applications. In this study, we extracted cellulose from water hyacinth (WH) biomass, known for its negative environmental impact, and converted it into hydrophobic cellulose. This addresses the issue of managing WH waste and creating an environmentally friendly hydrophobic material. Initially, aldehyde groups were introduced through oxidation with periodate, followed by direct octadecyl amine (ODA) grafting onto dialdehyde cellulose (DAC) via a Schiff base condensation. The resulting ODA modified cellulose (ODA-C) was dispersed in ethanol and used to coat various materials, including cotton fabric, cellulose filter paper, and packaging paper. The modified materials showed excellent hydrophobicity as measured by their water contact angles (WCAs), and the application of the coating was demonstrated for oil-water separation, stain-resistant hydrophobic fabric, and paper-based packaging materials. FTIR, XRD, and WCA analysis confirmed the successful modification of cellulose. A high separation efficiency of 99% was achieved for diesel/water separation using modified filter paper (MoFP), under gravity. On application of the coating, cotton fabric became hydrophobic and resisted staining from dye, and paper-based packaging materials became more robust by becoming water-resistant. Overall, the facile synthesis, low cost, high efficiency, and use of environmentally friendly sustainable materials make this a promising strategy for hydrophobically modifying surfaces for a wide range of applications while reducing the menace of water hyacinth. [Display omitted] • Hydrophobic cellulose produced from water hyacinth and used for oily water treatment • ODA-C modified filter paper shows excellent hydrophobicity with WCA ≥120°. • ≥99% efficiency was observed for separation of diesel/water suspension. • Modified materials show good reusability and durability. • Environmental concerns were addressed by a sustainable approach. [ABSTRACT FROM AUTHOR]

Due to their excellent properties, polyhydroxyalkanoates are gaining increasing recognition in the biodegradable polymer market. These biogenic polyesters are characterized by high biodegradability in multiple environments, overcoming the limitation of composting plants only and their versatility in production. The most consolidated techniques in the literature or the reference legislation for the physical, chemical and mechanical characterisation of the final product are reported since its usability on the market is still linked to its quality, including the biodegradability certificate. This versatility makes polyhydroxyalkanoates a promising prospect with the potential to replace fossil-based thermoplastics sustainably. This review analyses and compares the physical, chemical and mechanical properties of poly-β-hydroxybutyrate and poly-β-hydroxybutyrate-co-β-hydroxyvalerate, indicating their current limitations and strengths. In particular, the copolymer is characterised by better performance in terms of crystallinity, hardness and workability. However, the knowledge in this area is still in its infancy, and the selling prices are too high (9–18 $ kg−1). An analysis of the main extraction techniques, established and in development, is also included. Solvent extraction is currently the most widely used method due to its efficiency and final product quality. In this context, the extraction phase of the biopolymer production process remains a major challenge due to its high costs and the need to use non-halogenated toxic solvents to improve the production of good-quality bioplastics. The review also discusses all fundamental parameters for optimising the process, such as solubility and temperature. [Display omitted] • PHB and PHBV characterization approaches have been reported. • PHB and PHBV properties have been compared to fossil-based plastics. • Biopolymer extraction processes have been discussed. [ABSTRACT FROM AUTHOR]

Bioplastics might be an ecofriendly alternative to traditional plastics. However, recent studies have emphasized that even bioplastics can end up becoming micro- and nano-plastics due to their degradation under ambient environmental conditions. Hence, there is an urgent need to assess the hidden environmental pollution caused by bioplastics. However, little is known about the evolutionary trends of bibliographic data, degradation pathways, formation, and toxicity of micro- and nano-scaled bioplastics originating from biodegradable polymers such as polylactic acid, polyhydroxyalkanoates, and starch-based plastics. Therefore, the prime objective of the current review was to investigate evolutionary trends and the latest advancements in the field of micro-bioplastic pollution. Additionally, it aims to confront the limitations of existing research on microplastic pollution derived from the degradation of bioplastic wastes, and to understand what is needed in future research. The literature survey revealed that research focusing on micro- and nano-bioplastics has begun since 2012. This review identifies novel insights into microbioplastics formation through diverse degradation pathways, including photo-oxidation, ozone-induced degradation, mechanochemical degradation, biodegradation, thermal, and catalytic degradation. Critical research gaps are identified, including defining optimal environmental conditions for complete degradation of diverse bioplastics, exploring micro- and nano-bioplastics formation in natural environments, investigating the global occurrence and distribution of these particles in diverse ecosystems, assessing toxic substances released during bioplastics degradation, and bridging the disparity between laboratory studies and real-world applications. By identifying new trends and knowledge gaps, this study lays the groundwork for future investigations and sustainable solutions in the realm of sustainable management of bioplastic wastes. [Display omitted] • This review focuses on emerging trends in micro(nano)bioplastic research. • This study found that hidden pollution from bioplastics is an emerging problem. • This work serves as a strong platform for future micro(nano)bioplastic research. • Defining factors for completed degradation of bioplastics is a key research gap. [ABSTRACT FROM AUTHOR]

The environmental impact of biodegradable polylactic acid microplastics (PLA-MPs) has become a global concern, with documented effects on soil health, nutrient cycling, water retention, and crop growth. This study aimed to assess the repercussions of varying concentrations of PLA-MPs on rice, encompassing aspects such as growth, physiology, and biochemistry. Additionally, the investigation delved into the influence of PLA-MPs on soil bacterial composition and soil enzyme activities. The results illustrated that the highest levels of PLA-MPs (2.5%) impaired the photosynthesis activity of rice plants and hampered plant growth. Plants exposed to the highest concentration of PLA-MPs (2.5%) displayed a significant reduction of 51.3% and 47.7% in their root and shoot dry weights, as well as a reduction of 53% and 49% in chlorophyll a and b contents, respectively. The activities of catalase (CAT), superoxide dismutase (SOD), peroxidase (POD), and ascorbate peroxidase (APX) in rice leaves increased by 3.1, 2.8, 3.5, and 5.2 folds, respectively, with the highest level of PLA-MPs (2.5%). Soil enzyme activities, such as CAT, urease, and dehydrogenase (DHA) increased by 19.2%, 10.4%, and 22.5%, respectively, in response to the highest level of PLA-MPs (2.5%) application. In addition, PLA-MPs (2.5%) resulted in a remarkable increase in the relative abundance of soil Proteobacteria , Nitrospirae , and Firmicutes by 60%, 31%, and 98.2%, respectively. These findings highlight the potential adverse effects of PLA-MPs on crops and soils. This study provides valuable insights into soil-rice interactions, environmental risks, and biodegradable plastic regulation, underscoring the need for further research. [Display omitted] • Polylactic acid microplastics (PLA-MPs) induced oxidative stress in rice plants. • PLA-MPs adversely affected the growth of rice plants. • Rice photosynthetic activity was reduced by PLA-MPs. • PLA-MPs increased the activities of soil enzymes. • Rice-rhizosphere bacterial communities were altered by PLA-MPs. [ABSTRACT FROM AUTHOR]

Plastic pollution has become a major global concern, posing numerous challenges for the environment and wildlife. Most conventional ways of plastics degradation are inefficient and cause great damage to ecosystems. The development of biodegradable plastics offers a promising solution for waste management. These plastics are designed to break down under various conditions, opening up new possibilities to mitigate the negative impact of traditional plastics. Microbes, including bacteria and fungi, play a crucial role in the degradation of bioplastics by producing and secreting extracellular enzymes, such as cutinase, lipases, and proteases. However, these microbial enzymes are sensitive to extreme environmental conditions, such as temperature and acidity, affecting their functions and stability. To address these challenges, scientists have employed protein engineering and immobilization techniques to enhance enzyme stability and predict protein structures. Strategies such as improving enzyme and substrate interaction, increasing enzyme thermostability, reinforcing the bonding between the active site of the enzyme and substrate, and refining enzyme activity are being utilized to boost enzyme immobilization and functionality. Recently, bioengineering through gene cloning and expression in potential microorganisms, has revolutionized the biodegradation of bioplastics. This review aimed to discuss the most recent protein engineering strategies for modifying bioplastic-degrading enzymes in terms of stability and functionality, including enzyme thermostability enhancement, reinforcing the substrate binding to the enzyme active site, refining with other enzymes, and improvement of enzyme surface and substrate action. Additionally, discovered bioplastic-degrading exoenzymes by metagenomics techniques were emphasized. [Display omitted] • Conventional recycling methods could be replaced by biological ones that offer an ecosystem-friendly approach. • The aerobic and anaerobic mechanisms of microbial degradation for bioplastic have been reviewed. • The stability and activity of extracellular microbial enzymes can be influenced by environmental factors. • The preparation of bioplastic-degrading enzymes in various microorganisms using metagenomics techniques has been discussed. • Protein engineering techniques of bioplastic-degrading enzymes have been emphasized to improve biocatalytic performance. [ABSTRACT FROM AUTHOR]

The accumulation of petroleum-based plastics on our planet is causing serious environmental pollution. Biodegradable plastics, promoted as eco-friendly solutions, hold the potential to address this issue. However, their impact on the environment and the mechanisms of their natural degradation remain inadequately understood. Furthermore, the specific conditions set forth in international standards for evaluating the biodegradability of biodegradable plastics have led to misconceptions about their real-world behavior. To properly elucidate the relationship between their degradability and structure, this study mimics the thermal effect on poly(lactic acid) (PLA) under standardized composting temperature. The higher the crystallinity of PLA, the lower the degradation rate, which suggests that crystallinity is a key factor in determining degradation. The composting temperature of 58 °C induces crystallization by having a structural effect on the polymer, which in turn reduces the degradation rate of PLA. Therefore, control over temperature and crystallization during the processing and degradation of PLA is crucial, as it not only determines the biodegradability but also enhances the utility. [Display omitted] • Clarification of temperature's role in biodegradability. • PLA crystallization due to annealing at composting temperature. • 50% reduction in biodegradability of highly crystallized PLA. • Identification of 58 °C as optimal for microbial activity, not mandatory for degradation. [ABSTRACT FROM AUTHOR]

We examined the presence of microplastics in blue mussels Mytilus spp. from the intertidal zone of western Spitsbergen in Arctic Svalbard. The optical microscopy technique detected a total of 148 microplastics, with the highest concentration per mussel being 24 particles. Microplastics were found in 84% of the examined mussels. The microplastics ranged in size from <0.5 mm to 5 mm and consisted of fibers (83%), fragments (13%), plates (3%), and spherules (1%). The micro-Raman spectroscopy technique revealed four different types of polymers: polyethylene (67%), nylon-12 (17%), low-density polyethylene (11%), and polypropylene (5%). Our research shows that Arctic coastal waters are polluted with microplastics notwithstanding their remoteness. These findings suggest that microplastic contamination may harm marine life and coastal ecosystems and require further research into long-term environmental effects. We also indicate that intertidal mussels may be beneficial for monitoring microplastics because they can be collected without involving diving. [Display omitted] • Microplastics (MPs) found in tissues of an intertidal mussel population in Svalbard. • MPs were found in 84% of mussels ranging in length from 23 to 59 mm. • The size of MPs ranged from <0.5 mm to 5 mm. • Four types of polymers were detected by micro-Raman spectroscopy (μ-RS). [ABSTRACT FROM AUTHOR]

Plastics have a significant role in various sectors of the global economy since they are widely utilized in agriculture, architecture, and construction, as well as health and consumer goods. They play a crucial role in several industries as they are utilized in the production of diverse things such as defense materials, sanitary wares, tiles, plastic bottles, artificial leather, and various other household goods. Plastics are utilized in the packaging of food items, medications, detergents, and cosmetics. The overconsumption of plastics presents a significant peril to both the ecosystem and human existence on Earth. The accumulation of plastics on land and in the sea has sparked interest in finding ways to breakdown these polymers. It is necessary to employ suitable biodegradable techniques to decrease the accumulation of plastics in the environment. To address the environmental issues related to plastics, it is crucial to have a comprehensive understanding of the interaction between microorganisms and polymers. A wide range of creatures, particularly microbes, have developed techniques to survive and break down plastics. This review specifically examines the categorization of plastics based on their thermal and biodegradable properties, as well as the many types of degradation and biodegradation. It also discusses the various types of degradable plastics, the characterization of biodegradation, and the factors that influence the process of biodegradation. The plastic breakdown and bioremediation capabilities of these microbes make them ideal for green chemistry applications aimed at removing hazardous polymers from the ecosystem. [Display omitted] • Recent advances in the microbial and enzymatic degradation of synthetic plastics. • Individual and combinatorial degradation of petro-plastics for low-carbon economy. • Employment of isolated and mutant enzymes to enhance the efficiency of biodegradation. • Existing approaches & assays for degradation assessment based on varying properties. • Potent hazards of fragmented plastic, micro- and nanoplastics to the living beings. [ABSTRACT FROM AUTHOR]

Poly(ethylene terephthalate) (PET) plastic is an omnipresent synthetic polymer in our lives, which causes negative impacts on the ecosystem. It is crucial to take mandatory action to control the usage and sustainable disposal of PET plastics. Recycling plastics using nanotechnology offers potential solutions to the challenges associated with traditional plastic recycling methods. Nano-based degradation techniques improve the degradation process through the influence of catalysts. It also plays a crucial role in enhancing the efficiency and effectiveness of recycling processes and modifying them into value-added products. The modified PET waste plastics can be utilized to manufacture batteries, supercapacitors, sensors, and so on. The waste PET modification methods have massive potential for research, which can play major role in removing post-consumer plastic waste. The present review discusses the effects of micro/nano plastics in terrestrial and marine ecosystems and its impacts on plants and animals. Briefly, the degradation and bio-degradation methods in recent research were explored. The depolymerization methods used for the production of monomers from PET waste plastics were discussed in detail. Carbon nanotubes, fullerene, and graphene nanosheets synthesized from PET waste plastics were delineated. The reuse of nanotechnologically modified PET waste plastics for potential green energy storage products, such as batteries, supercapacitors, and sensors were presented in this review. [Display omitted] • Overview of advances in nanotechnology for PET waste plastic upcycling/recycling. • Technologies for the conversion of PET waste plastics into value-added products. • Carbon nanomaterials from PET waste plastics for potential green energy applications. [ABSTRACT FROM AUTHOR]

Resource recovery from solid organic wastes, such as degradable plastics, and upgrading raw bio-oil are important ways for reducing carbon and pollution emissions. Hydrodeoxygenation (HDO) is a common thermochemical treatment to upgrade crude bio-oil. In this study, in order to realize in situ HDO during the hydropyrolysis of heavy bio-oil and degradable plastics, a reduced Fe/Ce oxygen carrier (OC) was used to catalytically remove oxygen from organics under the methanol-zero valent aluminum (ZV Al) media, where the hydrogen was produced during pyrolysis instead of a direct hydrogen supply. The results showed that the reduced OC captured the oxygen from the pyrolysis products of heavy bio-oil and degradable plastic, representing the multi-selectivity of reduced OC to phenols, ketones, etc. The ZV Al system promoted the production and utilization of hydrogen, as evidenced by the increased hydrogen content in gas phase and hydrocarbon content in liquid phase. The hydrocarbon component distribution in the liquid phase increased clearly when hydropyrolysis with degradable plastics addtion, but the excess degradable plastics addition caused increasing of the liquid product viscosity, and decreasing of the liquid products yield for the higher ash content in degradable plastic, and a higher ZV Al amount was required to maintain the hydropyrolysis. Molecular dynamics simulations verified the synergistic effect of degradable plastics and bio-oil by the pyrolysis behavior in different systems and temperatures, and the pyrolysis pathways were proposed. This non-autocatalytic system realized the resource recovery and heavy bio-oil upgrading using an Fe/Ce OC. [Display omitted] • A methanol-zero valent aluminum media is used to provide reactive hydrogen. • Reduced iron oxide plays a dual function of oxygen carrier and catalyst for HDO. • Degradable plastics are used in co-pyrolysis with heavy bio-oil for resource utilization. • The upgrading mechanism is understood by a combination of experimental and molecular dynamics simulations. [ABSTRACT FROM AUTHOR]

The management of wastewater produced from alkali/surfactant/polymer (ASP) flooding, known for its considerable volume and high emulsion stability, poses a challenge in oilfields globally. This study has demonstrated that ionizing irradiation is a promising pretreatment method for ASP wastewater to improve oil-water separation. After a settling time of 1 h, approximately 69.5% of oil remained in the raw ASP wastewater, while only 20–29% of the oil persisted in the liquid phase following radiation at absorbed doses ranging from 0.1 to 5.0 kGy. A noticeable increase in the size of oil droplets and reduction in turbidity was observed after irradiation. Further analysis revealed that the combination of surfactant, sodium dodecyl sulfate (SDS) and alkali exhibits a synergistic impact, leading to a substantial reduction in interface tension of ASP wastewater. Notably, ionizing irradiation induces several key changes that are crucial for efficient demulsification. The transformation of the wastewater's rheological behavior from pseudoplastics to a Newtonian fluid accompanied by a reduction in viscosity, the increased interfacial tension at both liquid-air and liquid-oil interfaces, along with the degradation of organic components such as partly hydrolyzed polyacrylamide (HPAM) and SDS, all contribute to the coalescence and floatation of oil droplets. [Display omitted] • Electron beam is effective in enhancing oil-water separation of ASP wastewater. • With settling 1h oil remained 69.5% and 20–29% before and after 0.1–5.0 kGy radiation. • Rheological behavior changed from pseudoplastic to Newtonian after radiation. • IFT at liquid-air and liquid-oil interfaces increased and organics were degraded. • Coexistence of SDS and alkali play a vital role in IFT reduction of ASP wastewater. [ABSTRACT FROM AUTHOR]

Microplastics from mulch films can be a source of chemical contamination to agricultural soils. In this context, biodegradable films have been widely positioned as a greener choice. However, their sorption/desorption capabilities, in contrast to the conventional plastic types remain understudied. It is for this reason that objective evaluation of their interactions with residual agricultural contaminants becomes important. Our findings reveal that polyethylene (PE) mulch films retained lower amounts of pesticide residues and demonstrated a higher desorption/release [median desorption = 71.86 μg/L or about 50%], while polybutylene adipate terephthalate (PBAT) mulch films retained higher amounts of pesticide residues onto their surface and demonstrated a much lower desorption [median desorption = 24.27 μg/L or about 17%] after a spraying event. A higher ambient temperature had no significant effect on final desorption amounts in both PE [median = 65.27 μg/L at 20 °C and 74.23 μg/L at 40 °C] and PBAT [median = 24.26 μg/L at 20 °C and 24.78 μg/L at 40 °C] mulch films. However, it did favour a faster desorption pace in PE films. Desorption in PBAT and PE plastic types was correlated with the log K ow value [Spearman's correlation: 0.857 and 0.837 respectively, p < 0.05]. However, only a moderate correlation with pKa was observed in PBAT [Spearman's correlation: 0.478, p < 0.05], while none for PE plastic type. Sorption of pesticides onto biodegradable PBAT microplastics were best explained by Elovich [R2: 0.937–0.959] and pseudo-second order kinetics [R2: 0.942–0.987], suggesting the presence of chemisorption. Furthermore, Weber Morris plots suggested the presence of a multi-step process and Boyd plots indicated that film diffusion or chemical bond formation was the rate-limiting step governing this phenomenon. [Display omitted] • Biodegradable mulch films retained higher amounts of pesticides than PE films. • Higher temperature increased pace of desorption in conventional mulch films. • Sorption in biodegradable MP explained by Elovich and pseudo-second order models. • Chemical bonding governed the sorption process and was the rate-limiting step. • Log K ow cutoff value was lower for biodegradable than conventional plastic. [ABSTRACT FROM AUTHOR]

In recent times, microplastics have become a disturbance to both aquatic and terrestrial ecosystems and the ingestion of these particles can have severe consequences for wildlife, aquatic organisms, and even humans. In this study, two types of biochars were manufactured through the carbonization of naturally found starfish (SF-1) and aloevera (AL-1). The produced biochars were utilized as sensing electrode materials for the electrochemical detection of ∼100 nm polystyrene microplastics (PS). SF-1 and AL-1 based biochars were thoroughly analyzed in terms of morphology, structure, and composition. The detection of microplastics over biochar based electrodes was carried out by electrochemical studies. From electrochemical results, SF-1 based electrode exhibited the detection efficiency of ∼0.2562 μA/μM∙cm2 with detection limit of ∼0.44 nM whereas, a high detection efficiency of ∼3.263 μA/μM∙cm2 was shown by AL-1 based electrode and detection limit of ∼0.52 nM for PS (100 nm) microplastics. Process contributed to enhancing the sensitivity of AL-1 based electrode might associate to the presence of metal-carbon framework over biochar's surfaces. The AL-1 biochar electrode demonstrated excellent repeatability and detection stability for PS microplastics, suggesting the promising potential of AL-1 biochar for electrochemical microplastics detection. [Display omitted] • Biochars are produced by the carbonization of naturally found starfish (SF-1) and aloevera (AL-1). • Manufactured biochars utilize as sensing electrode materials for the electrochemical detection of PS (100 nm) microplastics. • A high detection efficiency of ∼3.263 μA/μM∙cm2 is recorded by AL-1 based electrode for PS (100 nm) microplastics. • AL-1 biochar electrode demonstrates excellent repeatability and detection stability for PS microplastics. [ABSTRACT FROM AUTHOR]

The increasing prevalence of microplastics in the environment has become a concern for various ecosystems, including wetland ecosystems. Here, we investigated the effects of three popular microplastic types: polyethylene, polylactic acid, and tire particles at 5 °C and 25 °C on the sediment microbiome and metabolome at the 3% (w/w) level. Results indicated that temperature greatly influenced catalase and neutral phosphatase activities, whereas the type of microplastic had a more significant impact on urease and dehydrogenase activities. The addition of microplastic, especially tire particles, increased microbial diversity and significantly altered the microbial community structure and metabolic profile, leading to the formation of different clusters of microbial communities depending on the temperature. Nonetheless, the effect of temperature on the metabolite composition was less significant. Functional prediction showed that the abundance of functional genes related to metabolism and biogeochemical cycling increased with increasing temperature, especially the tire particles treatment group affected the nitrogen cycling by inhibiting ureolysis and nitrogen fixation. These observations emphasize the need to consider microplastic type and ambient temperature to fully understand the ecological impact of microplastics on microbial ecosystems. [Display omitted] • Evaluated the effects of polyethylene, polylactic acid, and tire particles (microplastics - MPs) on sediment. • MPs, especially tire particles, increased microbial diversity at higher temperatures. • Temperature influenced microbial diversity dynamics and had less of an effect on metabolites. • Comparatively, tire particle treatments had unique microbial communities and different metabolites. [ABSTRACT FROM AUTHOR]

Nanoplastics (NPLs) persist in aquatic habitats, leading to incremental research on their interaction mechanisms with metalloids in the environment. In this regard, it is known that plastic debris can reduce the number of water-soluble arsenicals in contaminated environments. Here, the arsenic interaction mechanism with pure NPLs, such as polyethylene terephthalate (PET), aliphatic polyamide (PA), polyvinyl chloride (PVC), polyethylene (PE), polypropylene (PP), and polystyrene (PS) is evaluated using computational chemistry tools. Our results show that arsenic forms stable monolayers on NPLs through surface adsorption, with adsorption energies of 9–24 kcal/mol comparable to those on minerals and composite materials. NPLs exhibit varying affinity towards arsenic based on their composition, with As(V) adsorption showing higher stability than As(III). The adsorption mechanism results from a balance between electrostatics and dispersion forces (physisorption), with an average combined contribution of 87%. PA, PET, PVC, and PS maximize the electrostatic effects over dispersion forces, while PE and PP maximize the dispersion forces over electrostatic effects. The electrostatic contribution is attributed to hydrogen bonding and the activation of terminal O–C, C–H, and C–Cl groups of NPLs, resulting in several pairwise interactions with arsenic. Moreover, NPLs polarity enables high mobility in aqueous environments and fast mass transfer. Upon adsorption, As(III) keeps the NPLs polarity, while As(V) limits subsequent uptake but ensures high mobility in water. The solvation process is destabilizing, and the higher the NPL polarity, the higher the solvation energy penalty. Finally, the mechanistic understanding explains how temperature, pressure, pH, salinity, and aging affect arsenic adsorption. This study provides reliable quantitative data for sorption and kinetic experiments on plastic pollution and enhances our understanding of interactions between water contaminants. [Display omitted] • The As(V) adsorption is stronger than that of As(III) on all polymers. • PET/PVC and PA are the strongest As(III) and As(V) adsorbents, respectively. • The mechanism arises from combined electrostatics and dispersion forces (80%). • Changes in the polymer polarity increase the mobility and faster mass transfer. • The adsorption process is exothermic, with a high degree of orderliness. [ABSTRACT FROM AUTHOR]

The plastisphere is a newly recognized ecosystem. However, its interaction with early life stages of aquatic vertebrates is a multifaceted issue that requires further research. This study investigated the involvement of bacteria in shaping realistic microplastics hazards in zebrafish Danio rerio embryos. Fish were exposed to bottle micro-fragments (FR) and textile micro-fibers (FI) of polyethylene terephthalate (5–15 μm), concomitant with Aeromonas salmonicida achromogenes challenge from 2h post-fertilization for 3 days. Egg chorion showed affinity for FR and FI, inducing earlier embryo hatching. However, this effect was masked by biofilm invasion. Fragments were more detrimental than fibers on developmental parameters, while bacterial presence compromised body length, eye, and yolk sac surface area. In a further finding, MPs alone increased locomotor activity in zebrafish larvae, without synergistic effect when combined with bacteria. Data showed that realistic MPs had no significant effects except for downregulated sod and cyp1a gene expression, whereas bacterial challenge inhibited larval potency for most of the evaluated mRNA levels (mpx (immune system), apoeb (lipid metabolism), nfkb and tfa (inflammation), cyp and sod (oxidative stress)). This study provides new insights into realistic microplastic effects under relevant conditions when combined with environmental pathogen within the first life stages of aquatic vertebrates. [Display omitted] • The 24 hpf zebrafish embryonic chorion can block 5–15 μm PET fragments and fibers. • Bacteria have a high affinity for embryonic chorion. • Triggered MPs toxicity may stem from bacterial association. • Complex exposure may disrupt the larval antioxidant system. [ABSTRACT FROM AUTHOR]

Aged microplastics are ubiquitous in the aquatic environment, which inevitably accumulate metals, and then alter their migration. Whereas, the synergistic behavior and effect of microplastics and Hg(II) were rarely reported. In this context, the adsorptive behavior of Hg(II) by pristine/aged microplastics involving polystyrene, polyethylene, polylactic acid, and tire microplastics were investigated via kinetic (pseudo-first and second-order dynamics, the internal diffusion model), Langmuir, and Freundlich isothermal models; the adsorption and desorption behavior was also explored under different conditions. Microplastics aged by ozone exhibited a rougher surface attached with abundant oxygen-containing groups to enhance hydrophilicity and negative surface charge, those promoted adsorption capacity of 4–20 times increment compared with the pristine microplastics. The process (except for aged tire microplastics) was dominated by a monolayer chemical reaction, which was significantly impacted by pH, salinity, fulvic acid, and co-existing ions. Furthermore, the adsorbed Hg(II) could be effectively eluted in 0.04% HCl, simulated gastric liquids, and seawater with a maximum desorption amount of 23.26 mg/g. An artificial neural network model was used to predict the performance of microplastics in complex media and accurately capture the main influencing factors and their contributions. This finding revealed that aged microplastics had the affinity to trap Hg(II) from freshwater, whereafter it released the Hg(II) once transported into the acidic medium, the organism's gastrointestinal system, or the estuary area. These indicated that aged microplastics could be the sink or the source of Hg(II) depending on the surrounding environment, meaning that aged microplastics could be the vital carrier to Hg(II). [Display omitted] • The MPs exhibited abundant multipoles and active groups after ozone aging. • The adsorption and desorption mechanisms of Hg(II) were elaborated in depth. • BP-ANN model was adopted to predict the adsorptive properties of MPs. • The aged MPs played a vital carrier role in the transportation of Hg(II). [ABSTRACT FROM AUTHOR]

Supercritical water (SCW) treatment of plastics is a clean technology in the 'waste-to-energy' path. In this work, PP and PET plastics were processed by sub-/supercritical water. The results showed that temperature was the most important factor of the PP and PET degradation. The influence of factors on the degradation of plastics follows the following order: temperature > residence time > plastic/water ratio. These factors influenced the yield of gas products by promoting or inhibiting various reactions (such as reverse water gas shift reaction, methylation reaction, and Fischer-Tropsch synthesis reaction). Besides, the composition of liquid oil was also analyzed. The main composition of the liquid oil produced by PET was benzoic acid and acetaldehyde, which were generated from the decarboxylation of terephthalic acid (TPA) and dehydration reaction of ethylene glycol (EG). The liquid oil from PP was mainly long-chain olefins, long-chain alkanes, cycloalkanes, etc., which were formed by the interaction of various methyl, alkyl, hydroxyl, and other free radicals. This study could build fundamental theories of plastic mixture treatment. [Display omitted] • PET and PP waste recycling was performed by thermal treatment in sub-/supercritical water. • Influence of key operating parameters on PET and PP degradation was identified. • Gas yield could be manipulated by controlling WGS, methylation and F-T synthesis. • Hydrolysis, polyol gasification and reforming proceeded in PET decomposition. • Bond breaking and recombination were the dominating mechanism in PP decomposition. [ABSTRACT FROM AUTHOR]

Nanoplastics (NPs) have gained increasing attention due to their widespread presence in aquatic environments and potential adverse effects on organisms. The interaction between NPs and freshwater gastropods can lead to a range of physiological and reproductive disturbances. In this study, we investigated the adverse effects of NPs (two size: 20 nm and 100 nm; three concentrations: 0.5, 50 and 100 ppm) on energy metabolism and reproductive fitness in freshwater gastropods Lymnean stagnalis after 21 days exposure. Briefly, the condition index negatively correlated with increasing NPs concentrations for both sizes. Bioaccumulation revealed a concentration-dependent trend in the 100 nm group, and the highest accumulation appeared in the 100 ppm group, compared to all the rest groups. This phenomenon could be attributed to the larger surface area which facilitates stronger attachment to tissues, while smaller particles could be cleared more readily from body. Carbohydrate and protein reserves remained largely unaffected at all concentrations. However, 100 nm NPs triggered stress responses, increasing lipid production, and 20 nm NPs potentially interfered with mitochondrial function, affecting electron transport system activity. Despite the variations observed in lipid levels and energy cost, the ratio of available energy to energy cost remained stable across for both NPs sizes, and this resilience suggests that cellular energy allocation endured undisturbed, hinting at mechanisms that enable gastropods to maintain their metabolic equilibrium. Reproductively, NPL-exposed groups had fewer clutches, with clutches per collection time decreasing over time for both sizes. In terms of egg development, shell growth and hatching rates remained unaffected, suggesting resilience in aquatic ecosystems.In conclusion, this study underscores the substantial impact of NPs on freshwater gastropods, raising ecological and reproductive concerns. The intricate interplay between nanoparticle size, concentration, and physiological responses highlights the complexity of NPs interactions in aquatic ecosystems, necessitating further research and regulatory measures. • NPLs affect gastropod's condition index inversely with rising concentrations. • 100 nm NPLs exhibit concentration-dependent accumulation, peaking at 100 ppm. • 100 nm NPLs induce stress-driven lipid production; 20 nm interfere with ETS. • Gastropods maintain metabolic equilibrium under NPLs exposure. • NPLs reduce clutch numbers but do not affect egg shell growth or hatching rate. [ABSTRACT FROM AUTHOR]

Plastic materials provide numerous benefits. However, properties such as durability and resistance to degradation that make plastic attractive for variable applications likewise foster accumulation in the environment. Fragmentation of plastics leads to the formation of potentially hazardous microplastic, of which a considerable amount derives from polystyrene. Here, we investigated the biodegradation of polystyrene by the tropical sooty mold fungus Capnodium coffeae in different experimental setups. Growth of C. coffeae was stimulated significantly when cultured in presence of plastic polymers rather than in its absence. Stable isotope tracing using 13C-enriched polystyrene particles combined with cavity ring-down spectroscopy showed that the fungus mineralized polystyrene traces. However, phospholipid fatty acid stable isotope probing indicated only marginal assimilation of polystyrene-13C by C. coffeae in liquid cultures. NMR spectroscopic analysis of residual styrene contents prior to and after incubation revealed negligible changes in concentration. Thus, this study suggests a plastiphilic life style of C. coffeae despite minor usage of plastic as a carbon source and the general capability of sooty mold fungi to stimulate polystyrene mineralization, and proposes new standards to identify and unambiguously demonstrate plastic degrading capabilities of microbes. [Display omitted] • Capnodium coffeae develops larger colonies on MP-amended semi-solid medium. • CRDS indicates slow but steady fungal 13C-PS mineralization. • PLFA stable isotope probing indicates minor PS-derived 13C-assimilation. • Generic workflow for identification of plastic biodegraders is presented. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) as emerging pollutants are of increasing concern, due to their ubiquitous, uncertain, and complex environmental impacts. Different from the standard spherical MPs without additives, here polypropylene microplastics (PP-MPs) in flake derived from the disposable plastic cup in food-grade in daily life were studied. The characterization of PP-MPs demonstrated that the carbonyl index represented the aging degree was enhanced from 0.26 significantly to 0.82 after 10 days, and the aging process fitted well with pseudo-first-order kinetic. Moreover, the crystallinity degree, polarity and surface negative charges were enhanced, while the hydrophobicity was decreased. The adsorption behavior of PP-MPs toward methylene blue (MB), and the impacts of various pHs, salinities, and humic acid in aquatic environments were also explored. The pseudo-second-order kinetic, Henry and Sips isotherm models provided a good correlation with the experimental data, indicating that the rate-limiting step was closely related with the complex surface adsorption, and the hydrophobic partitioning, polar interaction, electrostatic attraction, and hydrogen bonding were possibly involved in the adsorption. These exhaustive experiments aim to provide a theoretical basis for assessing and better understanding the environmental behavior of disposable PP plastic cups in nature. [Display omitted] • Aging enhanced crystallinity degree, polarity and surface negative charges. • PSO kinetic, Sips and Henry isotherm described the adsorption better. • The adsorption was non-spontaneous and endothermic. • Hydrophobic partitioning, electrostatic attraction and hydrogen bonding dominated. • The coexisting inorganic salts exhibited various influences on MB adsorption. [ABSTRACT FROM AUTHOR]

Microplastics and microfibres are found ubiquitously in global oceans as well as marine organisms from different trophic levels. However, little is known about the presence of microplastics and microfibres in marine megafauna, such as sharks. This study provided the first investigation of the presence of microplastics and other anthropogenic fibres (i.e., cellulose based fibres) in intestine and muscle samples of four large apex shark species in Australian coastal waters. Microplastics and other anthropogenic fibres were found in 82% of the analysed intestine samples. The mean abundance in intestine samples was 3.1 ± 2.6 particles/individual, which corresponded to 0.03 ± 0.02 particles/g of intestine, across all shark species. The size of particles ranged from 190 to 4860 μm in length with 92% being fibrous in shape and the rest fragments. FTIR spectroscopy identified that 70% of fibres were cellulose-based followed by polyethylene terephthalate (PET), while the fragments were polyethylene and polypropylene. In shark muscles, 60% of samples contained microplastics and other anthropogenic fibres, again with the majority being cellulose-based fibres followed by PET fibres. Methodological differences hinder a more comprehensive assessment of microplastic contamination across studies. Additionally, we identified some challenges which should be factored in for future studies looking at the presence of microplastics as well as other anthropogenic fibres in these large marine organisms. Overall, the findings provide first evidence of microplastics and other anthropogenic fibres not only in the intestines, but also in muscle tissues of large apex shark species. [Display omitted] • Microplastics and other anthropogenic fibres were found in four apex shark species. • Fibres were predominantly found in both intestine and muscle samples. • Cellulose-based fibres accounted for 61–82% of all fibres detected. • PET plastic fibres accounted for the majority of plastic fibres. • Challenges in methodologies and cross-study comparison were identified. [ABSTRACT FROM AUTHOR]

In this study, the sources, abundance, and ecological implications of microplastic (MP) pollution in Volturno, one of the main rivers in southern Italy, were explored by investigating the MP concentration levels in sediments collected along the watercourse. The samples were sieved through 5- and 2-mm sieves and treated with selective organic solvents. The polymer classes polystyrene (PS), polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polycarbonate (PC), nylon 6 (PA6), and nylon 6,6 (PA66) were quantified using pyrolysis–gas chromatography–mass spectrometry (Py-GC/MS) and high-performance liquid chromatography (HPLC). Furthermore, a 16S rRNA metagenomic analysis was performed using next-generation sequencing in Ion Torrent™ to explore the bacterial taxonomy and ecological dynamics of sediment samples. The MPs were detected in all samples collected from the study area. PP and PET were the most abundant and frequently detected polymer types in the analysed samples. The total MP concentration ranged from 1.05 to 14.55 ppm (parts per million), identifying two distinct data populations: high- and low-MP-contaminated sediments. According to the Polymer Hazard Index (PHI), MP pollution was categorised as hazard levels III and IV (corresponding to the danger category). Metagenomic data revealed that the presence of MPs significantly affected the abundance of bacterial taxa; Flavobacteraceae and Nocardiaceae , which are known to degrade polymeric substances, were present in high-MP-contaminated sediments. This study provides new insights into the ecological relevance of MP pollution and suggests that microorganisms may serve as biomarkers of MP pollution. [Display omitted] • Microplastic (MP) quantification in sediments was achieved using Py-GC/MS and HPLC. • MP pollution was highly variable along the river continuum. • Bacterial taxonomic abundance in sediment was altered by MP contamination. • Microbial biomarkers of river sediment MP pollution dynamics were identified. [ABSTRACT FROM AUTHOR]

Nanoplastics and antibiotics frequently co-exist in water polluted by algal blooms, but little information is available about interaction between substances. Erythromycin, as a representative of antibiotics, has been frequently detected in aquatic environments. This investigation attempted to reveal the interaction mechanism of nanoplastics and erythromycin on Chlorella pyrenoidosa. Results demonstrated that the joint toxicity of erythromycin and nanoplastics was dynamic and depended on nanoplastics concentration. Antagonistic effects of 1/2 or 1 EC 50 erythromycin and nanoplastic concentration (10 mg/L) on the growth of C. pyrenoidosa was observed. The joint toxicity of 1/2 or 1 EC 50 erythromycin and nanoplastic concentration (50 mg/L) was initially synergistic during 24–48 h and then turned to antagonistic during 72–96 h. Consequently, antagonistic effect was the endpoint for joint toxicity. Integration of transcriptomics and physiological biochemical analysis indicated that the co-existence of nanoplastics and erythromycin affected the signal transduction and molecular transport of algal cell membrane, induced intracellular oxidative stress, and hindered photosynthetic efficiency. Overall, this study provided a theoretical basis for evaluating the interactive mechanisms of nanoplastics and antibiotics. [Display omitted] • Joint toxicity of nanoplastic and ERY to algae had both antagonism and synergism. • The dose of nanoplastics was the dominant factor affecting the joint toxicity. • Cell adhesion molecules pathway dominates cell defense against joint toxicity. [ABSTRACT FROM AUTHOR]

The elimination of microplastics (MPs) has become an urgent issue due to their large quantities and imperfect treatment technologies. In this work, polyethylene (PE), which is ubiquitous in the environment, was selected to study its removal by ozone-based treatment. Catalysts including α-MnO 2 and α-FeOOH were synthesized for catalytic ozonation to improve efficiency. The study focused on simulating the conversion of CO 2 in the off-gas via the detection of inorganic carbon produced. The morphology and structure of the remaining PE MPs were characterized using scanning electron microscope and Fourier-transform infrared spectroscopy-attenuated total reflection. Our results confirmed that fragmentation and oxidation occurred in the remaining PE MPs, which enhanced the adsorption capacity of ofloxacin (OF). Besides, the 20 mM α-FeOOH could better improve the mineralization efficiency by 3.27 folds with more production of •OH (1.09*10−12 M). Moreover, possible products identified by liquid chromatography-time-of-flight mass spectrometer confirmed the decomposition of main chains of MPs into low-molecular-weight organic compounds with functional groups such as C–OH, C–O–C, and C O. The finding that photoaged PE MPs could be efficiently mineralized under the attack of O 3 /•OH provides a solid foundation for the removal of natural MPs in the environment. [Display omitted] • Mineralization of PE MPs was accelerated by 3.27 folds by introducing 20 mM α-FeOOH into the ozonation system. • Adsorption capacity of remaining PE MPs for ofloxacin was enhanced. • PE MPs after photoaging were more sensitive to the attack of O 3 /OH.•. • The mechanism is that generated ROS leads to the mineralization of PE MPs. • Possible products were identified by LC-QTOF. [ABSTRACT FROM AUTHOR]

Microplastics (MPs), an emerging class of pollutants, significantly impact the photoconversion dynamics of tetracycline (TC). But the effect of prevalent dissolved organic matter (DOM) on TC photodegradation in the presence of MPs remains a gap in current research. In this study, the photoconversion behavior and mechanism of TC under simulated sunlight conditions were systematically investigated, both in the presence of DOM and in combination with polystyrene (PS) MPs. The results demonstrated that both DOM and MPs enhanced the photodegradation of TC when compared to its direct degradation. However, DOM, particularly humic acid (HA, 10 mg/L), exhibited a more pronounced enhancing effect on TC photodegradation within 1 h reaction, regardless of the presence or absence of MPs, reaching up to 80%. In reaction systems involving TC-HA and TC-HA-PS, the primary contributors to TC degradation were direct photolysis and HA photosensitization (free radical reactions). Conversely, photosensitization effects were not significant in the presence of fulvic acid (FA). Furthermore, even under dark reaction conditions, HA exhibited a 10% degradation effect on TC. Quenching experiments and electron spin resonance (ESR) results indicate that dark reaction processes involve free radical reactions. Additionally, toxicity test results showed a reduction in the acute toxicity of TC photodegradation products, yet the long-term cumulative risks to organisms deserved attention. In general, this investigation significantly advances our understanding of the intricate photoconversion behavior of TC in the presence of coexisting chemical components. [Display omitted] • DOM and MPs both could accelerated TC photodegradation. • HA exhibited better degradation efficiency for its photosensitization effect. • The first observation of HA promoted TC degradation under dark conditions. • TC showed faster degradation in natural water. [ABSTRACT FROM AUTHOR]

Agricultural mulch films are frequently applied to achieve high yield, resulting in large quantities of microplastic (MP) pollution in agroecosystem. However, studies focusing specifically on the diversity of MP-degrading enzymes and related microbial communities have yet to be conducted. Here, we established a soil microcosmic incubation with addition of 5% (w/w) conventional (low-density polyethylene (LDPE)) and biodegradable (blend of polylactic acid (PLA) and polybutylene adipate terephthalate (PBAT)) MPs for incubation 90 days. The DNA samples extracted from soils and plastisphere of MPs were examined by metagenomics and genome binning methods, specifically targeting carbohydrate-active enzymes (CAZymes) and plastic-degrading enzymes (PDZymes). The results revealed that plastisphere of MPs exhibited significantly distinct patterns of CAZymes and PDZymes from soils, and abundances of all examined exoenzymes were higher in plastisphere than those in soils. Plastisphere of LDPE-MPs selectively enriched proteases and alkane monooxygenase (alkB), and required families of carbohydrate-binding module (CBM) to increase the binding of CAZymes with MPs. Dissimilarly, diverse CAZymes with high abundances were observed in the plastisphere of PBAT-PLA MPs and esterases were important indicative PDZymes for PBAT-PLA degradation. The enriched exoenzymes in plastisphere of LDPE-MPs were mainly assigned to Actinobacteria while Proteobacteria with higher abundance in plastisphere of PBAT-PLA MPs containing most indicative exoenzymes. Moreover, a high-quality genome classified as Amycolatopsis japonica was reconstructed and found to contain one or more gene copies of indicative exoenzymes for polyethylene. Two novel genomes classified as Sphingomonas were selectively enriched in plastisphere of PBAT-PLA MPs and contained diverse genes encoding degrading exoenzymes. Taken together, our study highlighted the CAZymes and PDZymes can be exploited as potent microbial strategies for solving MPs pollution in croplands. [Display omitted] • MPs enriched a wide range of CAZymes and PDZymes compared to soils. • PE required CBM to enhance enzyme hydrolysis and selected proteases and alkane monooxygenase. • Diverse CAZymes and esterases as the important indicator act on BD biodegradation. • The potential PE degraders assigned to Actinobacteria while members of Proteobacteria enriched in BD. • Amycolatopsis japonica and Sphingononas were identified as the potential degraders for PE and BD, respectively. [ABSTRACT FROM AUTHOR]

It is estimated that the life of plastics is hundreds to thousands of years, their lasting properties making plastic debris absorbing toxic chemicals and degrading into microplastics (MPs). The purpose of this study was to explore the effects of exposure to different size (0.08 and 0.5 μm) polystyrene (PS) in mice. After 16 weeks of exposure, it was found that PS-MPs could be identified in the liver. No effect of PS-MPs treatment on body weight was observed. PS-MPs exposure disturbed lipids and lipid-like molecule metabolisms and perturbed the citrate cycle and oxidative phosphorylation. Meanwhile, isocitrate dehydrogenase (ICDHc), nicotinamide adenine dinucleotide -malate dehydrogenase (NAD-MDH), succinate dehydrogenase (SDH), α ketoglutarate dehydrogenase (α-KGDH) activities and adenosine triphosphate (ATP) level were obviously affected by PS-MPs treatment. In addition, significant differences were recorded in catalase (CAT) and malondialdehyde (MDA) levels, indicating that PS-MPs exposure induced an oxidative stress in the liver. In conclusion, our present study provided the first evidence of: (a) long-term exposure to PS-MPs lead to PS-MPs accumulated in the liver and results in liver injury; (b) long-term exposure to PS-MPs disturbs lipids and lipid-like molecule metabolisms; (c) long-term exposure to PS-MPs perturbs citrate cycle and oxidative phosphorylation and leads to oxidative stress in the liver. [Display omitted] • PS-MPs accumulates in the liver and induces liver injury in C57BL/6J mice. • PS-MPs alters lipid signatures in the liver. • ROS plays an important role in liver injury. • The production of ROS is related to abnormal lipid metabolism in the liver. [ABSTRACT FROM AUTHOR]

Discharging microplastics into the environment with treated wastewater is becoming a major concern around the world. Wastewater treatment plants (WWTPs) release microplastics into terrestrial and aquatic habitats, mostly from textile, laundry, and cosmetic industries. Despite extensive research on microplastics in the environment, their removal, and WWTP management strategies, highlighting their environmental effects, little is known about microplastics' fate and behaviour during various treatment processes. Microplastics interact with treatment technologies differently due to their diverse physical and chemical characteristics, resulting in varying removal efficiency. Microplastics removed from WWTPs may accumulate in soil and harm terrestrial ecosystems. Few studies have examined the cost, energy use, and trade-offs of large-scale implementation of modern treatment methods for the removal of microplastics. To safeguard aquatic and terrestrial habitats from microplastics' contamination, focused and efficient management techniques must bridge these knowledge gaps. This review summarizes microplastic detection, collection, removal and management strategies. A compilation of treatment process studies on microplastics' removal efficiency and their destiny and transit paths shows recent improvement. Bioremediation, membrane bioreactor (MBR), electrocoagulation, sol-gel technique, flotation, enhanced filtering, and AOPs are evaluated for microplastic removal. The fate and behaviour of microplastics in WWTPs suggest they may be secondary suppliers of microplastics to receiving ecosystems. Innovative microplastic removal strategies and technologies such as nanoparticles, microorganism-based remediation, and tertiary treatment raise issues. These new WWTP technologies are examined for feasibility, limitations, and implementation issues. Pretreatment modifies microplastic size, adsorption potential, and surface morphology to remove microplastics from WWTPs. Membrane bioreactors (MBR) can remove 99.9% of microplastics more efficiently than other approaches. MBR systems require membrane cleaning and fouling control, which raises operational and capital costs. To reduce MPs, plastic alternatives and strict controls, including microplastic waste transformation, should be prioritized. Microplastics must be controlled through monitoring policy execution and awareness. [Display omitted] • Discharging microplastics (MPs) via industrial wastewater is a pressing global issue. • MPs harm soil and ecosystems requiring a search for effective removal technologies. • Membrane bioreactor (MBR) showed effectiveness in removing more than 99.9 % of MPs. • Despite being expensive, bioremediation is demonstrated as an effective approach. • Plastic alternatives and stringent control approaches should be prioritized. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) are plastic particles in a size ranging from 1 mm to 5 mm in diameter, and are formed by the breakdown of plastics from different sources. They are emerging environmental pollutants, and pose a great threat to living organisms. Improper disposal, inadequate recycling, and excessive use of plastic led to the accumulation of MP in the environment. The degradation of MP can be done either biotically or abiotically. In view of that, this article discusses the molecular mechanisms that involve bacteria, fungi, and enzymes to degrade the MP polymers as the primary objective. As per as abiotic degradation is concerned, two different modes of MP degradation were discussed in order to justify the effectiveness of biotic degradation. Finally, this review is concluded with the challenges and future perspectives of MP biodegradation based on the existing research gaps. The main objective of this article is to provide the readers with clear insight, and ideas about the recent advancements in MP biodegradation. [Display omitted] • The accumulation of MPs in the environment is summarized. • The effects of MPs on marine, human health and animals are reviewed. • The mechanism and the advancements in biodegradation of microplastics are discussed. • The challenges and future perspectives of biodegradation of MPs are emphasized. [ABSTRACT FROM AUTHOR]