Search

Abstract Naphthenic acids (NAs) are one of the constituents of concerns in oil sands process water (OSPW) because of their persistence and recalcitrance. Herein, we investigated the degradation of five model NA compounds by UV-activated persulfate (UV/persulfate) process under medium-pressure UV lamp irradiation at pH 8.0. UV/persulfate process showed higher degradation efficiency towards cyclohexanoic acid (CHA) compared to UV/H 2 O 2 process under the same experimental conditions. CHA (0.39 mM) was completely removed within 30 min when 2 mM persulfate was used as oxidant, while more than 60 min were needed for the UV/H 2 O 2 process. The removal of CHA decreased from 100% to 10% when 300 mM tert-butyl alcohol (TBA) was used as the scavenger, indicating that hydroxyl radical (OH) was responsible for the CHA degradation in the UV/persulfate process. Sulfate (SO 4 −) radicals reacted slowly with CHA in the UV/persulfate process with a second-order rate constant of k = 5.3 × 107 M−1s−1. Relative kinetics studies using binary mixtures of model NA compounds showed similar structure-reactivity to that under UV/H 2 O 2 process. NAs with long carbon chain, cyclic ring, and aromatic ring were more reactive in the UV/persulfate process. The presence of high concentration of chloride ions dramatically inhibited the reaction. The OH radicals in the UV/persulfate process were generated by capturing OH− in solutions, as evidenced by the decrease of the pH value from 8.0 to 2.8 before and after treatment, respectively, in a pure water matrix. Primary intermediate products (oxy-CHA, hydroxyl-CHA, and dihydroxyl-CHA) of UV/persulfate process were confirmed by UPLC-MS. Highlights • UV activated persulfate oxidation process was used for the degradation of model NAs. • SO 4 − radical reacted slowly with CHA in UV/persulfate process compared to BA. • OH generated from SO 4 − and OH− were the main radicals responsible for the CHA removal. • Relative kinetics of model NA compounds in UV/persulfate process were studied. • The presence of chlorine ions was adverse to CHA removal and related chlorinated by-products were formed. [ABSTRACT FROM AUTHOR]

This study investigated the application of materials peat-mineral mix (PT) and Pleistocene fluvial sands from different location (PF-1 and PF-2) obtained from surface mining of oil sands as sorbents of naphthenic acids (NAs) from oil sands process water (OSPW). To understand the sorption properties and mechanisms of NAs in the materials, sorption and desorption studies were performed using decanoic acid (DA) and 5-phenylvaleric acid (PVA). Additionally, the removal efficiency was evaluated using real OSPW to understand the effect of NA structure on sorption. Equilibrium of DA and PVA was reached at 2 days for PT, and 3 and 6 days for PF materials, respectively. Langmuir isotherm best fitted the equilibrium data. Maximum sorption capacities for DA and PVA were, respectively, 16.8 × 103 and 104 mg/kg for PT, 142.9 and 81.3 mg/kg for PF-1, and 600 and 476.2 mg/kg for PF-2. Hydrophobic interactions, hydrogen bonding, and π−π interaction were the main sorption mechanisms. Desorption of model compounds from post-sorption materials was not observed for 14 days. The removal of NAs from real OSPW ranged from 20 to 54%. PT is the most promising sorbent of NAs from OSPW because it partially removed NAs with a wide range of molecular weights and structures at very low dosage. Sorption of NAs was affected by the total organic carbon of the materials, emphasizing the hydrophobic interaction as an important sorption mechanism. The results suggest that some mobility of NAs is expected to take place if the reclamation materials come in contact with OSPW, which might occur in an oil sands reclamation landscape. [Display omitted] • Three materials were studied as sorbents of model NA compounds and NAs from OSPW. • Sorption mechanisms included hydrogen bonding, hydrophobic and π−π interactions. • No desorption of model NAs from materials was observed up to 14 days of contact time. • Removal of NAs with different molecular weights and structures ranged from 9.9 to 68.3%. • TOC was the main characteristic of materials that affected the sorption of NAs from OSPW. [ABSTRACT FROM AUTHOR]

Naphthenic acids (NAs) are a highly complex mixture of organic compounds naturally present in bitumen and identified as the primary toxic constituent of oil sands process-affected water (OSPW). This work investigated the degradation of cyclohexanoic acid (CHA), a model NA compound, and natural occurring NAs during the UV photolysis of Fe(III)-nitrilotriacetic acid (UV-Fe(III)NTA) and UV-NTA-Fenton processes. The results indicated that in the UV-Fe(III)NTA process at pH 8, the CHA removal increased with increasing NTA dose (0.18, 0.36 and 0.72 mM), while it was independent of the Fe(III) dose (0.09, 0.18 and 0.36 mM). Moreover, the three Fe concentrations had no influence on the photolysis of the Fe(III)NTA complex. The main responsible species for the CHA degradation was hydroxyl radical ( OH), and the role of dissolved O 2 in the OH generation was found to be negligible. Real OSPW was treated with the UV-Fe(III)NTA and UV-NTA-Fenton advanced oxidation processes (AOPs). The removals of classical NAs (O 2 -NAs), oxidized NAs with one additional oxygen atom (O 3 -NAs) and with two additional oxygen atoms (O 4 -NAs) were 44.5%, 21.3%, and 25.2% in the UV-Fe(III)NTA process, respectively, and 98.4%, 86.0%, and 81.0% in the UV-NTA-Fenton process, respectively. There was no influence of O 2 on the NA removal in these two processes. The results also confirmed the high reactivity of the O 2 -NA species with more carbons and increasing number of rings or double bond equivalents. This work opens a new window for the possible treatment of OSPW at natural pH using these AOPs. [ABSTRACT FROM AUTHOR]

The fractionation of oil sands process-affected water (OSPW) via pH-dependent extractions was performed to quantitatively investigate naphthenic acids (NAs, C n H 2 n + Z O 2 ) and oxidized NAs (O x -NAs) species (C n H 2 n + Z O 3 and C n H 2 n + Z O 4 ) using ultra-performance liquid chromatography time-of-flight mass spectrometry (UPLC-TOFMS). A mathematical model was also developed to estimate the dissociation constant p K a for NAs species, considering the liquid–liquid extraction process and the aqueous layer acid-base equilibrium. This model provides estimated dissociation constants for compounds in water samples based on fractionation extraction and relative quantification. Overall, the sum of O 2 -, O 3 -, and O 4 -NAs species accounted for 33.6% of total extracted organic matter. Accumulative extracted masses at different pHs revealed that every oxygen atom added to NAs increases the p K a (i.e., O 2 -NAs < O 3 -NAs < O 4 -NAs), indicating that the additional O atoms exist as –OH in O 3 - and O 4 -NAs. Molecule electron-withdrawing groups such as double bonds and aromatic groups, as indicated by higher carbon and − Z number, may be responsible for the lower p K a of O 2 -, O 3 -, and O 4 -NAs. The model obtained estimated p K a values of 3.5 for O 2 -NAs, 4.8 for O 3 -NAs, and 6.8 for O 4 -NAs via nonlinear regression curve fittings. These p K a values are valuable physicochemical parameters for environmental engineering applications targeting OSPW NAs treatment. [ABSTRACT FROM AUTHOR]

There are several established methods for the determination of naphthenic acids (NAs) in waters associated with oil sands mining operations. Due to their highly complex nature, measured concentration and composition of NAs vary depending on the method used. This study compared different common sample preparation techniques, analytical instrument methods, and analytical standards to measure NAs in groundwater and process water samples collected from an active oil sands operation. In general, the high- and ultrahigh-resolution methods, namely high performance liquid chromatography time-of-flight mass spectrometry (UPLC-TOF-MS) and Orbitrap mass spectrometry (Orbitrap-MS), were within an order of magnitude of the Fourier transform infrared spectroscopy (FTIR) methods. The gas chromatography mass spectrometry (GC-MS) methods consistently had the highest NA concentrations and greatest standard error. Total NAs concentration was not statistically different between sample preparation of solid phase extraction and liquid-liquid extraction. Calibration standards influenced quantitation results. This work provided a comprehensive understanding of the inherent differences in the various techniques available to measure NAs and hence the potential differences in measured amounts of NAs in samples. Results from this study will contribute to the analytical method standardization for NA analysis in oil sands related water samples. [ABSTRACT FROM AUTHOR]

This work investigated the oxidative transformation of the organic species in oil sands process-affected water (OSPW) using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and ultra-performance liquid chromatography time-of-flight mass spectrometry (UPLC-TOF-MS) in both negative and positive electrospray ionization (ESI) modes. This is the first time to apply FTICR-MS to investigate species transformation in OSPW treatments by ferrate (VI), UV/H 2 O 2 , and molecular ozone, and also this is the first preliminary study to use positive ESI to investigate organic species in addition to naphthenic acids (NAs) in these treatment processes. The oxidation processes with potassium ferrate (VI), UV/H 2 O 2 , and ozone transformed the distribution profiles of O x , O x S y , and O x N y organic fractions (i.e., species containing oxygen, sulfur, and nitrogen, with x, y specifying the oxygen number and sulfur/nitrogen number, respectively), with O x S y distribution profiles showing the most sensitive responses to the oxidation extent and can be used as a signature fraction to evaluate the oxidation effectiveness. Negative mode UPLC-TOF-MS confirmed the transformation pattern of O x species observed with FTICR-MS, but positive mode UPLC-TOF-MS results showed severe discrepancies with FTICR-MS results and should be subjected for future further investigation, regarding the relatively low mass resolution of UPLC-TOF-MS. The investigation of the transformation patterns of different organic species using two ionization modes was a preliminary study to enhance the understanding of the efficiency, selectivity, and mechanism of different oxidation processes in OSPW remediation for both NAs and non-NA species. [ABSTRACT FROM AUTHOR]

Naphthenic acids (NAs) from oil sand process-affected water (OSPW) were liquid–liquid extracted using six organic solvents (n-pentane, n-hexane, cyclohexane, dichloromethane, ethyl ether, and ethyl acetate) at three pHs (2.0, 8.5, and 12.0). The NAs exist in ionic (ions) and non-ionic (molecules) forms in the water phase depending on their dissociation constants and the solution pH. Results showed the extractability of NA molecules depends on the solvent polarity and the extractability of NA ions on the water solubility in solvent. The organic solvent type and solution pH were found to not only impact the extracted amounts of each NA species, but also the NAs distribution in terms of molecule carbon number and hydrogen deficiency. Overall, it is concluded that ethyl ether can be used as an alternative to dichloromethane (DCM) given their similar extraction efficiencies and extracted NA profiles. This is important since DCM is known to have metabolic toxicity and transitioning to the safer ethyl ether would eliminate laboratory DCM exposures and risk to human health. Despite the higher extraction efficiency of NAs at pH 2.0, extraction at pH 12.0 could be useful for targeted extraction of low-concentration nonpolar organic compounds in OSPW. This knowledge may assist in the determination of the specific NAs species that are known to have chronic, sub-chronic and acute toxicity to various organisms, and the potential targeting of treatment to these NAs species. [ABSTRACT FROM AUTHOR]