Search

A significant quantity of hydrocarbons remains in the reservoir after production using primary and secondary techniques. Traditional recovery techniques produce about 33 % of the original oil in place. However, the utilization of chemicals such as surfactants and polymers facilitate the additional recovery of one‐third of this oil. Researchers are currently aiming at mixing surfactant and nanoparticles for their potential applications in petroleum industry. In this work, authors claimed to be the first to study usage of synthesized Mesoporous Silica Nanoparticles (MSN) with Sodium Dodecyl Sulphate (SDS) surfactant to understand its applicability in Chemical Enhanced Oil Recovery through evaluation of the surface tension & Interfacial tension, surfactant adsorption, contact angle, and core flooding experiments. Surface tension studies revealed a synergistic interaction between MSN and anionic surfactant molecules. With the introduction of 2500 ppm of anionic surfactant, the surface tension of deionized water reduces to 34.5 mN/m from 72.4 mN/m. The surface tension of the mixture was further lowered by ∼9.8 % with the addition of 300 ppm MSN. The Interfacial Tension results also showed the same trend. When 300 ppm of MSN was introduced, then IFT values decreases from 8.13 mN/m to 3.91 mN/m at 2500 ppm of anionic surfactant. Contact angle measurements after MSN injection went from 77.98° for SDS (2500 ppm) to 73.36°, 66.54°, and 41.95° for 100, 200, and 300 ppm of MSN, respectively. This demonstrates that the shift toward water‐wet behavior increased along with the MSN concentration. Additionally, adding 300 ppm of MSN lowered surfactant adsorption by ∼80 % at a surfactant concentration of 2500 ppm. Up to 72.27 % of the OOIP could be recovered using the chemical slug made of SDS surfactant, polymer, and MSN. The research data suggests that the MSN can increase the effectiveness of the chemical injection approach, which can be used to recover more oil. [ABSTRACT FROM AUTHOR]

Hematite nanoparticles (α‐Fe2O3) were successfully synthesised using facile and eco‐friendly hydrothermal method. Synthesised hematite nanoparticles were characterized using X‐ray diffraction, Fourier transform infrared spectroscopy, surface area analysis and transmission electron microscopy. Nano/micro particles of Hematite (1, 3&5 %, w/w) were incorporated in aerosol forming composite (AFC). For the first time, catalytic effect of nano and micro size hematite on performance of AFC has been creatively investigated with respect to combustion and fire extinguishment parameters. Incorporation of nano hematite (5 %, w/w) in AFC reduced the combustion temperature (by 11 %) and tremendously boosted the burn rate & combustion efficiency by 30&7.5 % respectively. This in turn produced the aerosols in less time and put out the fire quickly (<5 s). Hematite nano counterpart was discovered to be more promising than its micro equivalent. This exploratory study is valuable in the field of development of futuristic ultra‐fast fire extinguishants. [ABSTRACT FROM AUTHOR]

Surfactant flooding is a prolific enhanced oil recovery technique. It alters the rock fluid interfacial interactions between reservoir fluids and rocks. However, a pair of impeding factors often limit the economic viability of the process and need to be optimized. The first is the surfactant loss on the adsorbent surface due to adsorption making it a potential environmental problem. The second is the Critical Micelle Concentration (CMC) which governs the amount of surfactant pumped. This study aimed to minimize the surfactant loss and the CMC, thereby optimizing the flooding efficiency and reducing the environmental concerns for nanoparticle applications. To achieve this, Silicon Carbide nanoparticles (SCN) were employed as additives to the surfactant solution. It was observed that the use of SCN reduces the surfactant adsorption by as much as 44 % and the critical micelle concentration by 14 %. The studies also observed that the concentration of SCN required to get these results is dramatically (more than 25 times) lower than previously reported literature on other nanoparticles. To adsorption isotherm studies provide an insight into the type of adsorption taking place. The adsorption isotherm follows the Langmuir model. [ABSTRACT FROM AUTHOR]