Search

Supramolecular nanogels are an emerging class of polymer nanocarriers for intracellular delivery, due to their straightforward preparation, biocompatibility, and capability to spontaneously encapsulate biologically active components such as DNA. A completely biodegradable three‐component cationic supramolecular nanogel was designed exploiting the multivalent host‐guest interaction of cyclodextrin and adamantane attached to a polypeptide backbone. While cyclodextrin was conjugated to linear poly‐L‐lysine, adamantane was grafted to linear as well as star shaped poly‐L‐lysine. Size control of nanogels was obtained with the increase in the length of the host and guest polymer. Moreover, smaller nanogels were obtained using the star shaped polymers because of the compact nature of star polymers compared to linear polymers. Nanogels were loaded with anionic model cargoes, pyranine and carboxyfluorescein, and their enzyme responsive release was studied using protease trypsin. Confocal microscopy revealed successful transfection of mammalian HeLa cells and intracellular release of pyranine and plasmid DNA, as quantified using a luciferase assay, showing that supramolecular polypeptide nanogels have significant potential in gene therapy applications., Wrapped in a peptide box: Supramolecular nanogels self‐assembled from poly‐L‐lysine (PLL) modified with host and guest units can entrap molecular cargo such as DNA and deliver it into cells for transfection. The PLL is made by N‐carboxyanhydride polymerization and equipped with cyclodextrin and adamantane groups. The size of the nanogel can be tuned by the length of the PLL and smaller nanogels are better transfection agents.

Atropisomerism is a fundamental feature of substituted biaryls resulting from rotation around the biaryl axis. Different stereoisomers are formed due to restricted rotation about the single bond, a situation often found in substituted porphyrins. Previously NMR determination of porphyrin atropisomers proved difficult, if not almost impossible to accomplish, due to low resolution or unresolvable resonance signals that predominantly overlapped. Here, we shed some light on this fundamental issue found in porphyrinoid stereochemistry. Using benzenesulfonic acid (BSA) for host‐guest interactions and performing 1D, 2D NMR spectroscopic analyses, we were able to characterize all four rotamers of the nonplanar 5,10,15,20‐tetrakis(2‐aminophenyl)‐2,3,7,8,12,13,17,18‐octaethylporphyirin as restricted H‐bonding complexes. Additionally, X‐ray structural analysis was used to investigate aspects of the weak host–guest interactions. A detailed assignment of the chemical signals suggests charge‐assisted complexation as a key to unravel the atropisomeric enigma. From a method development perspective, symmetry operations unique to porphyrin atropisomers offer an essential handle to accurately identify the rotamers using NMR techniques only., Porphyrin atropisomers: Upon full assignment of all NMR signals symmetry elements were found to play a crucial part in the atropisomeric characteristics. A detailed study on nonplanar porphyrin atropisomers highlights new means to detect and identify individual rotamers in solution while X‐ray crystallographic analyses identified new supramolecular binding modes and specified aspects of weak interactions.

H‐bond donor catalysts able to modulate the reactivity of ionic substrates for asymmetric reactions have gained great attention in the past years, leading to the development of cooperative multidentate H‐bonding supramolecular structures. However, there is still a lack of understanding of the forces driving the ion recognition and catalytic performance of these systems. Herein, insight into the cooperativity nature, anion binding strength, and folding mechanism of a model chiral triazole catalyst is presented. Our combined experimental and computational study revealed that multi‐interaction catalysts exhibiting weak binding energies (≈3–4 kcal mol−1) can effectively recognize ionic substrates and induce chirality, while strong dependencies on the temperature and solvent were quantified. These results are key for the future design of catalysts with optimal anion binding strength and catalytic activity in target reactions., Brought into the fold! Fundamental insight into the folding mechanism, cooperativity nature and anion binding strength requirements in supramolecular anion‐binding catalysis is presented. This is afforded by a combined experimental and computational study with a prototypical foldameric triazole‐based chiral anion‐binding catalytic system, implying multi‐recognition sites to the ionic substrate units and weak binding energies as success factors.

Squaraine dyes are well known for their strong absorption in the visible regime. Reports on chiral squaraine dyes are, however, scarce. To address this gap, we here report two novel chiral squaraine dyes and their achiral counterparts. The presented dyes are aggregated in solution and in thin films. A detailed chiroptical study shows that thin films formed by co‐assembling the chiral dye with its achiral counterpart exhibit exceptional photophysical properties. The circular dichroism (CD) of the co‐assembled structures reaches a maximum when just 25 % of the chiral dye are present in the mixture. The solid structures with the highest relative CD effect are achieved when the chiral dye is used solely as a director, rather than the structural component. The chiroptical data are further supported by selected spin‐filtering measurements using mc‐AFM. These findings provide a promising platform for investigating the relationship between the dissymmetry of a supramolecular structure and emerging material properties rather than a comparison between a chiral molecular structure and an achiral counterpart., Helicity control: An unexpected outcome of the co‐assembly of achiral squaraine dye a‐SQ‐1 with its chiral counterpart S ‐SQ‐1 is reported. A maximum in optical activity is observed in the supramolecular aggregates of a 3:1 mixture with a‐SQ‐1 as the major component. Intriguingly, the highest spin‐selective electron transport is observed for this mixing ratio as well, illustrating the direct relationship between optical activity and spin‐selective electron transport.

Three Pt4L2L′2 heteroleptic rectangles (1–3), containing ditopic redox‐active bis‐pyridine functionalized perylene bisimide (PBI) ligands PBI‐pyr2 (L) are reported. Co‐ligand L′ is a dicarboxylate spacer of varying length, leading to modified overall size of the assemblies. 1H NMR spectroscopy reveals a trend in the splitting and upfield chemical shift of the PBI‐hydrogens in the rectangles with respect to free PBI, most pronounced with the largest strut length (3) and least with the smallest strut length (1). This is attributed to increased rotational freedom of the PBI‐pyr 2 ligand over its longitudinal axis (Npy‐Npy), due to increased distance between the PBI‐surfaces, which is corroborated by VT‐NMR measurements and DFT calculations. The intramolecular motion entails desymmetrization of the two PBI‐ligands, in line with cyclic voltammetry (CV) data. The first (overall two‐electron) reduction event and re‐oxidation for 1 display a subtle peak‐to‐peak splitting of 60 mV, whilst increased splitting of this event is observed for 2 and 3. The binding of pyrene in 1 is probed to establish proof of concept of host‐guest chemistry enabled by the two PBI‐motifs. Fitting the binding curve obtained by 1H NMR titration with a 1:1 complex formation model led to a binding constant of 964±55 m −1. Pyrene binding is shown to directly influence the redox‐chemistry of 1, resulting in a cathodic and anodic shift of approximately 46 mV on the first and second reduction event, respectively., Increasing the dimensions of redox‐active perylene bis‐imide (PBI) based 2D supramolecular PtII‐ rectangles by adjusting the length of the secondary dicarboxylate strut leads to noticeably different electrochemical redox‐responses of the PBI‐fragments, induced by enhanced electronic communication within the assembly and thus to a tunable interior binding site for host‐guest chemistry.

Owing to the electron‐donating and ‐accepting nature of corroles (Corr) and phthalocyanines (Pc), respectively, we designed and developed two novel covalently linked Corr‐Pc conjugates. The synthetic route allows the preparation of the target conjugates in satisfying yields. Comprehensive steady‐state absorption, fluorescence, and electrochemical assays enabled insights into energy and electron‐transfer processes upon photoexcitation. Coordinating a pyridine‐appended subphthalocyanine (SubPc) to the Pc of the conjugate sets up the ways and means to realize the first example of an array composed by three different porphyrinoids, which drives a cascade of energy and charge‐transfer processes. Importantly, the SubPc assists in stabilizing the charge‐separated state, that is, one‐electron oxidized Corr and the one electron‐reduced Pc, upon photoexcitation by means of a reductive charge transfer to the SubPc. To the best of our knowledge, this is the first case of an intramolecular oxidation of a Corr within electron‐donor–acceptor conjugates by means of just photoexcitation. Moreover, the combination of Corr, Pc, and SubPc guarantees panchromatic absorption across the visible range of the solar spectrum, with the SubPc covering the „green gap“ that usually affects porphyrinoids., Cascades: The preparation of two covalently linked corrole‐Zn phthalocyanine dyads is reported. The coordination of a pyridine‐appended perfluorinated subphthalocyanine to the zinc phthalocyanine leads to the formation of supramolecular triads. Corrole acts as electron donor upon photoexcitation, with subphthalocyanine as the final acceptor. These cascade‐like charge phenomena make these triads promising materials in molecular photovoltaics (see figure).

We investigated the adsorption of three related cyano‐functionalized tetraphenyl porphyrin derivatives on Cu(111) by scanning tunneling microscopy (STM) in ultra‐high vacuum (UHV) with the goal to identify the role of the cyano group and the central Cu atom for the intermolecular and supramolecular arrangement. The porphyrin derivatives studied were Cu‐TCNPP, Cu‐cisDCNPP, and 2H‐cisDCNPP, that is, Cu‐5,10,15,20‐tetrakis‐(p‐cyano)‐phenylporphyrin, Cu‐meso‐cis‐di(p‐cyano)‐phenylporphyrin and 2H‐meso‐cis‐di(p‐cyano)‐phenylporphyrin, respectively. Starting from different structures obtained after deposition at room temperature, all three molecules form the same long‐range ordered hexagonal honeycomb‐type structure with triangular pores and three molecules per unit cell. For the metal‐free 2H‐cisDCNPP, this occurs only after self‐metalation upon heating. The structure‐forming elements are pores with a distance of 3.1 nm, formed by triangles of porphyrins fused together by cyano‐Cu‐cyano interactions with Cu adatoms. This finding leads us to suggest that two cyano‐phenyl groups in the “cis” position is the minimum prerequisite to form a highly ordered 2D porous molecular pattern. The experimental findings are supported by detailed density functional theory calculations to analyze the driving forces that lead to the formation of the porous hexagonal honeycomb‐type structure., Snowflake‐shaped porphyrins: Twelve doubly cyano‐functionalized Cu‐tetraphenylporphyrins form a snowflake‐like structure around a macropore, as observed by scanning tunneling microscopy at room temperature.

The synthesis of tetramethoxyresorcinarene podands bearing p‐toluene arms connected by ‐SO3‐ (1) and ‐CH2O‐ (2) linkers is presented herein. In the solid state, the resorcinarene podand 1 forms an intramolecular self‐inclusion complex with the pendant p‐toluene group of a podand arm, whereas the resorcinarene podand 2 does not show self‐inclusion. The conformations of the flexible resorcinarene podands in solution were investigated by variable‐temperature experiments using 1D and 2D NMR spectroscopic techniques as well as by computational methods, including a conformational search and subsequent DFT optimisation of representative structures. The 1H NMR spectra of 1 and 2 at room temperature show a single set of proton signals that are in agreement with C 4v symmetry. At low temperatures, the molecules exist as a mixture of boat conformations featuring slow exchange on the NMR timescale. Energy barriers (ΔG ≠ 298) of 55.5 and 52.0 kJ mol−1 were calculated for the boat‐to‐boat exchange of 1 and 2, respectively. The results of the ROESY experiments performed at 193 K and computational modelling suggest that in solution the resorcinarene podand 1 adopts a similar conformation to that present in its crystal structure, whereas podand 2 populates a more versatile range of conformations in solution., Self‐inclusion: An intramolecular self‐inclusion complex of a flexible resorcinarene podand stabilised by weak C−H⋅⋅⋅O interactions has been observed in both the crystal structure and in solution (see figure). The solid‐state conformation was determined by XRD and the conformation in solution was investigated by NMR and computational methods, with good agreement observed between the different techniques.

The design and synthesis of air‐stable and conveniently crystallizable RhIII‐cyclopentadienyl catalysts substituted with a urea moiety, which are able to accelerate the C−H olefination of benzoic acid derivatives, is reported. Through kinetic studies and NMR titration experiments, the catalysts’ substrate recognition ability mediated by hydrogen bonding was identified to be the reason for this effect. Introduction of pyridone‐phosphine ligands capable of forming additional H‐bond interactions increased the catalytic performance even further. By unveiling a proportionality between reaction rate and relative complex formation enthalpy the hypothesis of a supramolecular catalyst preformation was supported. Its application to a variety of substrates proved the catalyst system's advantages, generally increasing the yields when compared to the results obtained with widely used [RhCp*Cl2]2., Supramolecular chemistry: The design and synthesis of urea‐substituted RhIII‐cyclopentadienyl catalysts, which accelerate the C−H olefination of benzoic acid derivatives, is reported. The catalysts’ substrate recognition ability mediated by H‐bonding is identified to be the reason for this effect. Its application to a variety of substrates proves the catalyst system's advantages compared to the results obtained with widely used [RhCp*Cl2]2.

The supramolecular polymerization of an acid‐sensitive pyridyl‐based ligand (L1) bearing a photoresponsive azobenzene moiety was elucidated by mechanistic studies. Addition of trifluoroacetic acid (TFA) led to the transformation of the antiparallel H‐bonded fibers of L1 in methylcyclohexane into superhelical braid‐like fibers stabilized by H‐bonding of parallel‐stacked monomer units. Interestingly, L1 dimers held together by unconventional pyridine–TFA N⋅⋅⋅H⋅⋅⋅O bridges represent the main structural elements of the assembly. UV‐light irradiation caused a strain‐driven disassembly and subsequent aggregate reconstruction, which ultimately led to short fibers. The results allowed to understand the mechanism of mutual influence of acid and light stimuli on supramolecular polymerization processes, thus opening up new possibilities to design advanced stimuli‐triggered supramolecular systems., A look into the self‐assembly: Detailed mechanistic insights into the supramolecular polymerization of an acid‐sensitive photoresponsive pyridyl‐based ligand are reported. Addition of acid (TFA) caused the transformation of long twisted fibers into superhelical braid‐like assemblies stabilized by aromatic, H‐bonding, and van der Waals interactions through a dimerization event involving two unconventional pyridine–TFA N⋅⋅⋅H⋅⋅⋅O bridges. Photoirradiation led to a strain‐driven disassembly of the superhelical fibers and subsequent attenuated growth into short fibers after reconstruction.

Versatile photoresponsive gels based on tripodal low molecular weight gelators (LMWGs) are reported. A cyclohexane‐1,3,5‐tricarboxamide (CTA) core provides face‐to‐face hydrogen bonding and a planar conformation, inducing the self‐assembly of supramolecular polymers. The CTA core was substituted with three arylazopyrazole (AAP) arms. AAP is a molecular photoswitch that isomerizes reversibly under alternating UV and green light irradiation. The E isomer of AAP is planar, favoring the self‐assembly, whereas the Z isomer has a twisted structure, leading to a disassembly of the supramolecular polymers. By using tailor‐made molecular design of the tripodal gelator, light‐responsive organogels and hydrogels were obtained. Additionally, in the case of the hydrogels, AAP was coupled to the core through hydrazones, so that the hydrogelator and, hence, the photoresponsive hydrogel could also be assembled and disassembled by using dynamic covalent chemistry.

We disclose the results of our investigations on the influence that the insertion method of aryl-extended calix[4]pyrrole into liposomal membranes exerts on their properties as anion carriers. We use the standard HPTS assay to assess the transport properties of the carriers. We show that the post-insertion of the carrier, as DMSO solution, assigns better transport activities to the “two-wall” a,a-aryl-extended calix[4]pyrrole 1 compared to the “four-wall” a,a,a,acounterpart 2. Notably, opposite results were obtained when the carriers were pre-inserted into the liposomal membranes. We assign this difference to an improved incorporation of carrier 2 into the membrane when delivered by the pre-insertion method. On the other hand, carrier 1 shows comparable levels of transport independently of the method used for its incorporation. Thus, an accurate comparison of the chloride transport activities featured by these two carriers demands their pre-incorporation in the liposomal membranes. In contrast, using the lucigenin assay with the pre-insertion method both carriers displayed similar transport efficiencies.

The design of a biomimetic and fully base metal photocatalytic system for photocatalytic proton reduction in a homogeneous medium is described. A synthetic pyridylphosphole‐appended [FeFe] hydrogenase mimic was encapsulated inside a supramolecular zinc porphyrin‐based metal–organic cage structure Fe4(Zn‐L)6. The binding is driven by the selective pyridine–zinc porphyrin interaction and results in the catalyst being bound strongly inside the hydrophobic cavity of the cage. Excitation of the capsule‐forming porphyrin ligands with visible light while probing the IR spectrum confirmed that electron transfer takes place from the excited porphyrin cage to the catalyst residing inside the capsule. Light‐driven proton reduction was achieved by irradiation of an acidic solution of the caged catalyst with visible light.

The cellular uptake of self‐assembled biological and synthetic matter results from their multicomponent properties. However, the interplay of the building block composition of self‐assembled materials and uptake mechanisms urgently requires addressing. It is shown here that supramolecular polymers that self‐assemble in aqueous media, are a modular and controllable platform to modulate cellular delivery by the introduction of small ligands or cationic moieties, with concomitantly different cellular uptake kinetics and valence dependence. A library of supramolecular copolymers revealed stringent mutually exclusive uptake behavior in which either of the uptake pathways dominated, with sharp compositional transition. Supramolecular biomaterial engineering thus provides for adaptive platforms with great potential for efficient tuning of multivalent and multicomponent systems interfacing with biological matter.

none 8 si VIP paper, featured in front cover (DOI: 10.1002/chem.201605975) The formation of distinct supramolecular assemblies, including a metastable species, is revealed for a lipophilic guanosine (G) derivative in solution and in the solid state. Structurally different G-quartet-based assemblies are formed in chloroform depending on the nature of the cation, anion and the salt concentration, as characterized by circular dichroism and time course diffusion-ordered NMR spectroscopy data. Intriguingly, even the presence of potassium ions that stabilize G-quartets in chloroform was insufficient to exclusively retain such assemblies in the solid state, leading to the formation of mixed quartet and ribbon-like assemblies as revealed by fast magic-angle spinning (MAS) NMR spectroscopy. Distinct N−H⋅⋅⋅N and N−H⋅⋅⋅O intermolecular hydrogen bonding interactions drive quartet and ribbon-like self-assembly resulting in markedly different 2D 1H solid-state NMR spectra, thus facilitating a direct identification of mixed assemblies. A dissolution NMR experiment confirmed that the quartet and ribbon interconversion is reversible–further demonstrating the changes that occur in the self-assembly process of a lipophilic nucleoside upon a solid-state to solution-state transition and vice versa. A systematic study for complexation with different cations (K+, Sr2+) and anions (picrate, ethanoate and iodide) emphasizes that the existence of a stable solution or solid-state structure may not reflect the stability of the same supramolecular entity in another phase. Reddy, G. N. Manjunatha; Huqi, Aida; Iuga, Dinu; Sakurai, Satoshi; Marsh, Andrew; Davis, Jeffery T.; Masiero, Stefano; Brown, Steven P Reddy, G. N. Manjunatha; Huqi, Aida; Iuga, Dinu; Sakurai, Satoshi; Marsh, Andrew; Davis, Jeffery T.; Masiero, Stefano; Brown, Steven P

Chemistry - a European journal 24(10), 2503 - 2508 (2018). doi:10.1002/chem.201705883, Pentaphosphaferrocene $\mathrm{[Cp*Fe(η^5-P5)]}$ (1 a) represents an excellent building block for the template-directed synthesis of spherical supramolecules. Here, the self-assembly of 1 a with $\mathrm{Cu^I}$ and $\mathrm{Cu^{II}}$ halides in the presence of the template complexes $\mathrm{[FeCp_{2}][PF_{6}], [CoCp_{2}][PF6]}$ and $\mathrm{[CoCp_2]}$ is reported, testifying to the redox behavior of the formed supramolecules. The oxidation or reduction capacity of these reactive complexes does not inhibit their template impact and, for the first time, the cationic metallocene $\mathrm{[CoCp_{2}]^+}$ is enclosed in unprecedented anionic organometallic hosts. Furthermore, the large variety of structural motifs, as icosahedral, trigonal antiprismatic, cuboidal and tetragonal antiprismatic arrangements of 1 a units are realized in the supramolecules $\mathrm{[FeCp_2]@[{1 a}_{12}(CuBr)_{17.3}] (3), [CoCp_{2}]^{+}_{3}{[CoCp_{2}]^{+}@[{1 a}_{8}Cu_{24.25}Br_{28.25}(CH_{3}CN)_{6}]^{4−}} (4), {[Cp_{2}Co]^{+}@[{1 a}_{8}(CuI)_{28} (CH_{3}CN)_{9.8}]}{[Cp_{2}Co]^{+}@[{1 a)}_{8}Cu_{24.4}I_{26.4}(CH_{3}CN)_{8}]^{2−}} (5), and [{1 a}_{3}{(1 a)_{2}NH}_{3}Cu_{16}I_{10}(CH_{3}CN)_{7}] (6)}$, respectively., Published by Wiley-VCH, Weinheim

The cavity of an M8L12 cubic coordination cage can accommodate a cluster of ten water molecules in which the average number of hydrogen bonds per water molecule is 0.5 H‐bonds less than it would be in the bulk solution. The presence of these “hydrogen‐bond frustrated” or “high‐energy” water molecules in the cavity results in the hydrophobic effect associated with guest binding being predominantly enthalpy‐based, as these water molecules can improve their hydrogen‐bonding environment on release. This contrasts with the classical form of the hydrophobic effect in which the favourable entropy change associated with release of ordered molecules from hydrophobic surfaces dominates. For several guests Van't Hoff plots showed that the free energy of binding in water is primarily enthalpy driven. For five homologous pairs of guests related by the presence or absence of a CH2 group, the incremental changes to ΔH and TΔS for guest binding—that is, ΔΔH and TΔΔS, the difference in contributions arising from the CH2 group—are consistently 5(±1) kJ mol−1 for ΔΔH and 0(±1) kJ mol−1 for TΔΔS. This systematic dominance of ΔH in the binding of hydrophobic guests is consistent with the view that guest binding is dominated by release of “high energy” water molecules into a more favourable solvation environment, as has been demonstrated recently for some members of the cucurbituril family.

In this study unprecedented regio-selectivity to the branched aldehyde product in hydroformylation of propene is attained upon embedding a rhodium complex in a supramolecular assembly, L2, formed by coordination-driven self-assembly of tris-(meta-pyridyl)-phosphine and zinc(II) porpholactones. The design of the new capsule is based on the ligand-template approach, in which the ligand acts as a template for the capsule formation. Previously we have reported the first generation capsule L1, in which zinc(II) porphyrin units were utilized instead of porpholactones. Binding studies demonstrate that the association constant for the formation of the second generation capsule L2 is nearly an order of magnitude higher than for L1. This strengthened binding keeps the new capsule L2 intact in polar and industrially interesting solvents. As a consequence, the unprecedented regioselectivity for branched aldehyde products can be retained in polar and coordinating solvents when using the second-generation assembly.

Anion receptors can be used to transport ions across lipid bilayers, which has potential for therapeutic applications. Synthetic bicarbonate transporters are of particular interest, as defects in transmembrane transport of bicarbonate are associated with various diseases. However, no convenient method exists to directly observe bicarbonate transport and study the mechanisms involved. Here, an assay is presented that allows the kinetics of bicarbonate transport into liposomes to be monitored directly and with great sensitivity. The assay utilises an encapsulated europium(III) complex, which exhibits a large increase in emission intensity upon binding bicarbonate. Mechanisms involving CO2 diffusion and the dissipation of a pH gradient are shown to be able to lead to an increase in bicarbonate concentration within liposomes, without transport of the anion occurring at all. By distinguishing these alternative mechanisms from actual bicarbonate transport, this assay will inform the future development of bicarbonate transporters., A new assay to study bicarbonate transport is reported, which is based on a europium complex that is encapsulated inside liposomes and reports changes in the intravesicular concentration of bicarbonate in a direct and highly sensitive way. This assay was used to reveal that synthetic anion transporters can act via different mechanisms: 1) actual transport of HCO3 − anions; 2) CO2 diffusion coupled to dissipation of the resulting transmembrane pH gradient.

Herein, the synthesis of fullerene derivatives with adjustable polarities and lyotropic aggregation properties is reported. The polarity range spans from superhydrophobic to hydrophilic, while simultaneously providing a further reactive position with a view to graft them onto other materials. The synthetic strategy relies on a selective protection with an isoxazoline moiety. The remaining octahedral positions were further functionalized with the desired groups to tune their solubility, yielding mixed [5:1] hexakisadducts. The subsequent deprotection by clean photolytic reaction led to fullerene pentakisadducts with an incomplete octahedral addition pattern, which are useful forerunners for the synthesis of building blocks. Their hydrophobic/hydrophilic behavior has been characterized both in solution and surface through octanol/water partition coefficients (log P) and contact angle measurements. Furthermore, these derivatives can form supramolecular constructions which have been studied by dynamic light scattering (DLS) and cryo‐TEM.

A chiral perylene diimide building block has been prepared based on an amine derivative of the amino acid l‐phenylalanine. Detailed studies were carried out into the self‐assembly behaviour of the material in solution and the solid state using UV/Vis, circular dichroism (CD) and fluorescence spectroscopy. For the charged building block BTPPP, the molecular chirality of the side chains is translated into the chiral supramolecular structure in the form of right‐handed helical aggregates in aqueous solution. Temperature‐dependent UV/Vis studies of BTPPP in aqueous solution showed that the self‐assembly behaviour of this dye can be well described by an isodesmic model in which aggregation occurs to generate short stacks in a reversible manner. Wide‐angle X‐ray diffraction studies (WXRD) revealed that this material self‐organises into aggregates with π–π stacking distances typical for π‐conjugated materials. TEM investigations revealed the formation of self‐assembled structures of low order and with no expression of chirality evident. Differential scanning calorimetry (DSC) and polarised optical microscopy (POM) were used to investigate the mesophase properties. Optical textures representative of columnar liquid–crystalline phases were observed for solvent‐annealed samples of BTPPP. The high solubility, tunable self‐assembly and chiral ordering of these materials demonstrate their potential as new molecular building blocks for use in the construction of chiro‐optical structures and devices.

A series of novel functionalised dumbbell‐shaped bifullerenes in which two [5.0] pentakis‐adducts of C60 are covalently connected by cyclic bismalonates were synthesised. These dimeric compounds, carrying various combinations of hydrophilic and hydrophobic addends, self‐assemble in aqueous solution towards supramolecular architectures of different structural complexity as observed by cryogenic transmission electron microscopy (cryo‐TEM). The detailed analysis of the image data revealed an unprecedented hierarchical aggregation behaviour. Whereas completely hydrophilic substituted bifullerenes formed profoundly monodisperse populations of small oligomeric elementary micelles consisting of only three or four bifullerene molecules in a supposedly bent conformation, their amphiphilic equivalents underwent a hierarchical two‐step assembly process towards larger spherical and even rod‐like structures. The data suggest that the hierarchical assembly process is driven by hydrophobic interactions of preformed tetrameric elementary micelles.

A self‐sorting network comprising six different hydrogen bonding‐motifs is presented. Detailed analysis of the pairwise molecular recognition behavior of each hydrogen‐bonding motif by NMR spectroscopy, single‐crystal studies, and DFT allowed the construction of cascades exploiting integrative and non‐integrative narcissistic and social self‐sorted product distributions. Multiple distinct pathways within the network could be created depending on the presence or absence of different components. More information can be found in the Full Paper by C. Fonseca Guerra, A. J. Wilson, et al. on page 785-795.

Statistical copolymerization plays a key role in many biological and technological processes; however, mechanistic understanding of the formation of analogous supramolecular counterparts remains limited. Herein, we report detailed insights into the supramolecular co‐assembly of two π‐conjugated PdII and PtII complexes, which in isolation self‐assemble into flexible fibers and nanodisks, respectively. An efficient single‐step co‐assembly into only one type of nanostructure (fibers or nanodisks) takes place if any of the components is in excess. In contrast, equimolar mixtures lead to PdII‐rich fiber‐like co‐assemblies by a statistical co‐nucleation event along with a residual amount of self‐sorted nanodisks in a stepwise manner., Go nano! Mechanistic insights into the supramolecular co‐assembly of two structurally related π‐conjugated PdII and PtII complexes are reported. While the final nanostructure morphology upon co‐assembly (fibers or nanodisks; see figure) is dictated by the component that is present in excess, equimolar mixtures lead to PdII‐rich co‐assembled fibers by a co‐nucleation event along with a residual amount of self‐sorted nanodisks in a stepwise manner.

(Figure Presented). Methylene-bridged calix[4]arenes have emerged as extremely versatile ligand supports in the formation of new polymetallic clusters possessing fascinating magnetic properties. Metal ion binding rules established for this building block allow one to partially rationalise the complex assembly process. The ability to covalently link calix[4]arenes at the methylene bridge provides significantly improved control over the introduction of different metal centres to resulting cluster motifs. Clusters assembled from bis-calix[4]-arenes and transition metal ions or 3d-4 f combinations display characteristic features of the analogous calix[4]arene supported clusters, thereby demonstrating an enhanced and rational approach towards the targeted synthesis of complex and challenging structures.

Vernier templating exploits a mismatch between the number of binding sites in a template and a reactant to direct the formation of a product that is large enough to bind several template units. Here, we present a detailed study of the Vernier-templated synthesis of a 12-porphyrin nanoring. NMR and small-angle X-ray scattering (SAXS) analyses show that Vernier complexes are formed as intermediates in the cyclo-oligomerization reaction. UV/Vis/NIR titrations show that the three-component assembly of the 12-porphyrin nanoring figure-of-eight template complex displays high allosteric cooperativity and chelate cooperativity. This nanoring–template 1:2 complex is among the largest synthetic molecules to have been characterized by single-crystal analysis. It crystallizes as a racemate, with an angle of 27° between the planes of the two template units. The crystal structure reveals many unexpected intramolecular C[BOND]H⋅⋅⋅N contacts involving the tert-butyl side chains. Scanning tunneling microscopy (STM) experiments show that molecules of the 12-porphyrin template complex can remain intact on the gold surface, although the majority of the material unfolds into the free nanoring during electrospray deposition.