Search

Abstract: Ruthenium‐containing organometallic ionic liquids with the B(CN)4 anion were developed that generate microporous amorphous coordination polymers upon UV irradiation. UV light irradiation of [Ru(C5H5)(C6H5R)][B(CN)4] (R=butyl, ethyl, octyl) quantitatively generated a yellow powder of a coordination polymer with the formula [Ru(C5H5){B(CN)4}]n. In this reaction, the arene ligand is eliminated by UV irradiation and coordination polymer is formed by coordination of the cyano groups of the anion to the Ru ion. The photogenerated solids exhibited nitrogen absorption properties due to their microporous structure. This paper proposes a method to fabricate functional coordination polymers by photoirradiation of liquids. [ABSTRACT FROM AUTHOR]

Sustainable ionic liquids are promising compounds in green chemistry applications. While using them as solvent or reaction media is an important step towards more environmentally friendly chemistry, their synthesis is usually expensive and not green at all. Herein, a benign route to synthesize task ‐ specific ionic liquids is presented, offering several possible functionalities in the cation and anion (artwork by D. Kraban). More information can be found in the Full Paper by C. Liedel et al. on page 11810. [ABSTRACT FROM AUTHOR]

Diimidazolium-based organic salts, bearing peptides or amino acids as anions have been synthesised and tested for their gelling ability in biocompatible solvents. These low molecular weight salts were successfully used as gelators in phosphate buffered saline (PBS) solution and ionic liquids. Then, the properties of the obtained soft materials were analysed in terms of melting temperature and gel strength as accounted for by rheological investigations. The gel-phase formation was studied by using UV/Vis and resonance light scattering measurements, whereas the morphology of the soft materials was analysed by using polarised optical microscopy and scanning electron microscopy. To get information about the organisation of the gelator in the gelatinous matrix, X-ray diffraction measurements were performed both on the neat gelators and their gels. The results collected show that the properties of the gel phases, like the thermal stability, the self-repairing ability, the resistance to flow as well as the morphology, are dependent on the nature of the anion. Furthermore, bioassays revealed that the obtained diimidazolium organic salts possessed antimicrobial activity, against gram-negative and gram-positive tester strains. In particular and noteworthy, the diimidazolium organic salts exert a bactericidal capability, which was retained even if they are included in the gel phase. Thus, a novel kind of bioactive soft material was obtained that could be fruitfully employed as a non-covalent coating exerting antibacterial capability. [ABSTRACT FROM AUTHOR]

We report the synthesis of task-specific imidazolium ionic compounds and ionic liquids with key functionalities of organic molecules from electro-, polymer-, and coordination chemistry. Such products are highly functional and potentially suitable for technology applications even though they are formed without elaborate reactions and from cheap and potentially green reagents. We further demonstrate the versatility of the used synthetic approach by introducing different functional and green counterions to the formed ionic liquids directly during the synthesis or after metathesis reactions. The influence of different cation structures and different anions on the thermal and electrochemical properties of the resulting ionic liquids is discussed. Our goal is to make progress towards economically competitive and sustainable task-specific ionic liquids. [ABSTRACT FROM AUTHOR]

Depending on the amount of methanol present in solution, CO2 adducts of N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) have been found to be in fully reversible equilibrium with the corresponding methyl carbonate salts [EMIm][OCO2Me] and [EMMIm][OCO2Me]. The reactivity pattern of representative 1-ethyl-3-methyl-NHO-CO2 adduct 4 has been investigated and compared with the corresponding NHC-CO2 zwitterion: The protonation of 4 with HX led to the imidazolium salts [NHO-CO2H][X], which underwent decarboxylation to [EMMIm][X] in the presence of nucleophilic catalysts. NHO-CO2 zwitterion 4 can act as an efficient carboxylating agent towards CH acids such as acetonitrile. The [EMMIm] cyanoacetate and [EMMIm]2 cyanomalonate salts formed exemplify the first C−C bond-forming carboxylation reactions with NHO-activated CO2. The reaction of the free NHO with dimethyl carbonate selectively led to methoxycarbonylated NHO, which is a perfect precursor for the synthesis of functionalized ILs [NHO-CO2Me][X]. The first NHO-SO2 adduct was synthesized and structurally characterized; it showed a similar reactivity pattern, which allowed the synthesis of imidazolium methyl sulfites upon reaction with methanol. [ABSTRACT FROM AUTHOR]

We present a new class of tunable aryl alkyl ionic liquids (TAAILs) containing different palladate counter ions. Solid‐state structures for representative compounds have been obtained. Their properties are presented in comparison to those of newly synthesized and reported palladate ionic liquids with conventional counter ions. It was found that the aryl substitution pattern and the type of anion have a profound influence on the melting point. The speciation of the different anions in solution has been rationalized by DFT calculations. Customize, adapt, overcome: Ionic liquids containing a palladate anion are accessible in a very flexible synthetic procedure. The choice of aryl substituent, alkyl group, type of palladate counter ion and halide ligand can all be modified to allow for fine‐tuning of the properties of a wide range of new compounds. [ABSTRACT FROM AUTHOR]

Owing to their ease of synthesis, diffuse positive charge, and chemical stability, 1‐alkyl‐3‐methylimidazolium cations (i.e. [Cnmim]+) are one of the most routinely utilized and historically important components in ionic liquid (IL) chemistry. However, while this is a routinely encountered member of the IL family as cations, relatively few workers have explored the versatile chemistry of azoles to allow their use as an anionic component in ILs, as azolates. Azolate anions possess many of the desired properties for IL formation, including a diffuse ionic charge, tailorable asymmetry, and synthetic flexibility, with the added advantages of not relying on halogen atoms for electron‐withdrawing effects, as is commonly encountered with IL anions such as hexafluorophosphate. This review explores the 122 azolate‐containing ILs known in the literature (prepared from only 39 disparate azolate anions), with a view to highlighting not only their demonstrated utility as an IL component, but the ways in which the larger scientific community may utilize their advantageous properties for new tailored materials. Overlooked but not forgotten! Versatile azolate anions as a promising ionic liquid component for new tailored materials. Azolate anions possess many of the desired properties for IL formation, including a diffuse ionic charge, tailorable asymmetry, and synthetic flexibility. [ABSTRACT FROM AUTHOR]

Several abstracts related to chemistry are presented including ion pairs in ionic liquid, imidazolium salt ion pairs in solution, and polyoxometalates.

New salts based on imidazolium, pyrrolidinium, phosphonium, guanidinium, and ammonium cations together with the 5-cyanotetrazolide anion [C2N5]− are reported. Depending on the nature of cation-anion interactions, characterized by XRD, the ionic liquids (ILs) have a low viscosity and are liquid at room temperature or have higher melting temperatures. Thermogravimetric analysis, cyclic voltammetry, viscosimetry, and impedance spectroscopy display a thermal stability up to 230 °C, an electrochemical window of 4.5 V, a viscosity of 25 mPa s at 20 °C, and an ionic conductivity of 5.4 mS cm−1 at 20 °C for the IL 1-butyl-1-methylpyrrolidinium 5-cyanotetrazolide [BMPyr][C2N5]. On the basis of these results, the synthesized compounds are promising electrolytes for lithium-ion batteries. [ABSTRACT FROM AUTHOR]

The solubility of benzene in 15 imidazolium, pyrrolidinium, pyridinium, and piperidinium ionic liquids has been determined; the resulting, benzene-saturated ionic liquid solutions, also known as liquid clathrates, were examined with 1H and 19F nuclear magnetic resonance spectroscopy to try and understand the molecular interactions that control liquid clathrate formation. The results suggest that benzene interacts primarily with the cation of the ionic liquid, and that liquid clathrate formation (and benzene solubility) is controlled by the strength of the cation-anion interactions, that is, the stronger the cation-anion interaction, the lower the benzene solubility. Other factors that were determined to be important in the final amount of benzene in any given liquid clathrate phase included attractive interactions between the anion and benzene (when significant), and larger steric or free volume demands of the ions, both of which lead to greater benzene solubility. [ABSTRACT FROM AUTHOR]

Thirty six novel ionic liquids (ILs) with 1-butyl-3-methylimidazolium and 3-methyl-1-octylimidazolium cations paired with 2-substitited 4,5-dicyanoimidazolate anions (substituent at C2=chloro, bromo, methoxy, vinyl, amino, methyl, ethyl, propyl, isopropyl, butyl, pentyl, hexyl, heptyl, octyl, nonyl, decyl, undecyl and phenyl) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and single-crystal X-ray crystallography. The effects of cation and anion type and structure on the thermal properties of the resulting ionic liquids, including several room temperature ionic liquids (RTILs) are examined and discussed. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of −22 to −68 °C. The effects of alkyl substituents of the imidazolate anion reflected the crystallization, melting points and thermal decomposition of the ILs. The Coulombic packing force, van der Waals forces and size of the anions can be considered for altering the thermal transitions. Three crystal structures of the ILs were determined and the effects of changes to the cations and anions on the packing of the structure were investigated. [ABSTRACT FROM AUTHOR]

A series of thioether-functionalised imidazolium salts have been prepared and characterized. Subsequent reaction of the thioether-functionalised imidazolium salts with iodomethane affords imidazolium-sulfonium salts composed of doubly charged cations and two different anions. Imidazolium-sulfonium salts containing a single anion type are obtained either by a solvent extraction method or by anion exchange. The imidazolium-sulfonium salts undergo a methyl-transfer reaction on exposure to water, giving rise to a new, singly charged imidazolium salt with iodide introduced at the 2-position of the imidazolium ring. Crystal structures of some of the imidazolium-sulfonium salts were determined by X-ray crystallography providing the topology of the interactions between the dications and the anions. Electrospray ionization mass spectrometry and quantum-chemical calculations were used to rationalise the relative strength of these interactions. [ABSTRACT FROM AUTHOR]

We have performed a systematic study addressing the surface behavior of a variety of functionalized and non-functionalized ionic liquids (ILs). From angle-resolved X-ray photoelectron spectroscopy, detailed conclusions on the surface enrichment of the functional groups and the molecular orientation of the cations and anions is derived. The systems include imidazolium-based ILs methylated at the C2 position, a phenyl-functionalized IL, an alkoxysilane-functionalized IL, halo-functionalized ILs, thioether-functionalized ILs, and amine-functionalized ILs. The results are compared with the results for corresponding non-functionalized ILs where available. Generally, enrichment of the functional group at the surface is only observed for systems that have very weak interaction between the functional group and the ionic head groups. [ABSTRACT FROM AUTHOR]

This study describes the fabrication of a novel hybrid metal-organic framework- organic polymer (MOF-polymer) for use as a stationary phase in fritless solid-phase microextraction (SPME) for validating analytical methods. The MOF-polymer was prepared by using ethylene dimethacrylate (EDMA), butyl methacrylate (BMA), and an imidazolium-based ionic liquid as porogenic solvent followed by microwave-assisted polymerization with the addition of 25 % MOF. This novel hybrid MOF-polymer was used to extract penicillin (penicillin G, penicillin V, oxacillin, cloxacillin, nafcillin, dicloxacillin) under different conditions. Quantitative analysis of the extracted penicillin samples using the MOF-organic polymer for SPME was conducted by using capillary electrochromatography (CEC) coupled with UV analysis. The penicillin recovery was 63-96.2 % with high reproducibility, sensitivity, and reusability. The extraction time with the proposed fabricated SPME was only 34 min. [ABSTRACT FROM AUTHOR]