Search

Graphene supported FeN5 active sites, exhibiting high activity and stability of oxygen reduction reaction, enable a H2-air fuel cell to decay little during the latter 20–100 h operation. [Display omitted] • Electrochemically-exfoliated graphene improves forming FeN 5 with NH 3. • Graphene benefits catalytic stability of oxygen reduction reaction. • Fuel cell keep stable with little decay in latter 80 h operation. • High half-wave potentials in alkaline medium (0.940 V). Metal-nitrogen-carbon catalytic material, generally thought as a promising low-cost electrocatalyst of oxygen reduction reaction (ORR), surfers from long-term catalytic durability for fuel cell and metal-air battery. Here, we describe an approach of synthesizing electrochemically exfoliated graphene supported penta-nitrogen coordinated iron exhibiting encouraging ORR catalytic activity and durability. The synthesized catalyst exhibits high half-wave potentials in alkaline medium (E 1/2 0.940 V) enabling high-performance zinc-air battery and in acidic condition for durable fuel cell with a high peak power density (630 mW cm−2). The current density of a proton exchange membrane fuel cell loading the catalyst as cathode tends to decay little after initial hours under H 2 -air measurement, remarkably inhibiting commonly decline tendency of iron–nitrogen-carbon catalysts. DFT calculation combined with extensive experimental investigations demonstrate that penta-nitrogen coordinated iron supported by graphene is thermodynamically stable, and thus benefits the catalytic stability of ORR. [ABSTRACT FROM AUTHOR]

[Display omitted] • Mn-N-C catalysts were developed by a newly designed bis(imino)-pyridine precursor. • The structures of Mn-N-C are dependent on the growth of the precursor with NaCl. • The Mn-N-C nanosheets with short Mn-N length shows excellent ORR performance. • This work provides new understanding for the rational design of M−N−C. Revealing the correlation between the micro–macro structures and active sites of transition metal-nitrogen-carbon (M−N−C) for electrochemical oxygen reduction reaction (ORR) is essential to develop non-precious metal catalyzed fuel cells and metal-air batteries. Herein, Mn-N-C catalysts with various morphologies and microstructures were prepared using Mn2+ coordinated bis(imino)-pyridine-based polymer with N-rich content as a new platform of precursor, which was synthesized via a condensation reaction of 1H-1, 2, 4-Triazole-3, 5-Diamine and 2, 6-Diacetylpyridine. Results demonstrate that morphologies and fine structures (pore structure, N dopants, surface area, and atomic Mn-N bond length, etc.) of Mn-N-C catalysts are strongly dependent on the growth of the specific precursor with and without NaCl as a template and the secondary calcination temperature can further optimize the bond length of Mn-Nx moieties, resulting in significant activity differences between correspondingly derived Mn-N-C catalysts for ORR. Compared to Mn-N-C derived from the synthesized precursor without NaCl, Mn-N-C obtained by the precursor grown directly on NaCl features an ultra-thin nanosheet-like structure with a hierarchical pore distribution and a shorter Mn-N bond, presenting high ORR performance with a half-wave potential of 0.88 V in 0.1 M KOH and a tiny potential loss of 11 mV after 30 K cycles, which is also proved by high-performance practical single Zn-Air battery (139 mW·cm−2) and proton exchange membrane fuel cell (400 mW·cm−2). This work provides a new understanding of the critical role of morphology and Mn-N bonding length of M−N−C for enhancing ORR and a new route of developing non-Fe/Co-based M−N−C catalysts for electrocatalysis. [ABSTRACT FROM AUTHOR]