Search

[Display omitted] • Novel edge-N doped hierarchical carbons were firstly reported for P electrosorption. • The edge-N strategy endowed more accessible active centers and conductive efficiency. • The LNPC900 electrode showed a superior phosphate removal capacity of 533.06 mg g−1. • The system performed well in natural water purification with low P concentration. • The coupling of electrical capacitance and chemical interactions were achieved. Achieving high-efficiency removal of phosphate has been an urgent issue to combat eutrophication and meet ever-stricter emission standards. Electro-assisted adsorption, a mild electrochemical technology, demonstrated great potential for wastewater treatment owing to the merits of considerable removal performance, facile operation, and energy efficiency. Exploring and boosting the properties of electrode materials is exceedingly vital for technological advancement. In this study, the novel edge-N decorated La-doped hierarchical carbon composites (LNPCs) were developed via in-situ nucleation and one-pot pyrolysis strategy as phosphate capture electrodes. The LNPC900 electrode exhibited an ultrahigh phosphate removal capability of 533.06 mg PO 4 3- g−1 at 1.2 V, surpassing most of the reported electrode materials. Furthermore, this electrochemical system also performed well in the purification of natural river water with low phosphate concentration, where the treated concentration was below the first-class emission standard in China (0.5 mg P L−1). Comprehensive analysis and theoretical calculations indicate that the synergistic property of edge-N and small graphitic carbon nanodomains ensured more accessible active centers and conductive efficiency. The superb phosphate removal capability mainly originated from the coupling contribution of the electrical double layer capacitance, ligand exchange, and electrostatic attraction. This study possesses insight into the theoretical basis for the practical application of phosphate electrosorption and provides a new level of the technology. [ABSTRACT FROM AUTHOR]

[Display omitted] • State of the art in electrosorption of organic compounds (EOC) critically reviewed. • EOC shows promise against poorly adsorbable, highly polar, and ionized pollutants. • Enhanced adsorption and active control of ad-/desorption by electric potential. • Insightful performance parameters proposed to unify rapidly growing EOC research. • EOC application for on-site regenerable adsorbers and in treatment trains discussed. The widespread contamination of water resources with emerging organic contaminants necessitates the development of sustainable and cost-effective water treatment technologies. Adsorption, as a widely used water remediation process, is hampered by severe performance limitations against ionic and hydrophilic organic contaminants. In addition, no facile on-site regeneration techniques are available. Electrosorption of organic compounds (EOC) is a promising alternative to not only improve adsorption performance, but also to facilitate adsorbent regeneration by green electricity. The number of studies on EOC has grown exponentially over the past decades. There are numerous examples showing that applied electric potentials can significantly enhance the adsorption affinity, capacity, and kinetics of conductive carbon adsorbents. However, whether these effects are specific to certain compound classes or more generally applicable remains unclear as well as the optimal criteria for designing EOC processes. Therefore, we critically evaluated the current state of the art of EOC in terms of active control of adsorption and desorption processes and the achievable effects for ionic and neutral organic compounds. Through a detailed consideration of compound speciation and surface chemistry of electrode materials, we derive mechanistic insights into the EOC process and discuss differences between electrosorption of inorganic and organic compounds. We provide definitions and propose insightful performance parameters to unify the rapidly growing EOC research. Potential application scenarios and future research directions are discussed. Overall, EOC is less likely to be a one-fits-all solution for removing contaminants, but adds a valuable tool especially for the hydrophilic and ionic organic contaminants that challenge conventional adsorption processes. [ABSTRACT FROM AUTHOR]

[Display omitted] • Charging activated carbon (AC) tunes adsorption of ionic but not nonionic compounds. • Defunctionalized AC allows better electro-assisted trap&release performance. • Combine surface modification and electric polarization for promoted removal. • Long-term (20 d) stable electro-assisted trap&release with high enrichment effects. • Electro-assisted trap&release promising for on-site AC regeneration. Highly water-soluble, persistent, and mobile organic compounds (PMOCs) are more and more often detected in surface and groundwater, evoking potential threats to the environment and human health. Traditional water treatment strategies, including adsorption by activated carbon materials, fail to efficiently remove PMOCs due to their hydrophilic nature. Electro-assisted sorption processes offer a clean, facile, and promising solution to remove PMOCs on activated carbon-based electrodes and potentially allow an easy on-site sorbent regeneration (trap&release). In this work, the electrosorption of five selected PMOCs, that is, tetrapropylammonium (TPA+), benzyltrimethylammonium (BTMA+), p -tosylate (p -TsO-), p -toluenesulfonamide (p -TSA), and methyl- tert -butyl ether (MTBE), were investigated on two comprehensively characterized activated carbon felt (ACF) types carrying different surface functionalities. Significant enrichment factors in ranges of 102 to 103 for charged PMOCs were expected by our first estimation for electro-assisted trap&release on ACFs in flow systems applying potentials in the range of −0.1 V/+0.6 V vs. SHE for ad-/desorption, respectively. Defunctionalized ACF carrying larger density in surface π-systems and lower O-content promises a higher capability in electrosorption processes than the pristine material in terms of better material stability (tested for 5 cycles over 500 h) and better removal efficiency of ionic PMOCs. To improve ACFs adsorption performance for cationic and anionic PMOCs, permanent chemical surface modification and reversible electric polarization as alternative strategies are compared. Our findings explore future electrode and process design of electrosorption for applications to treat water contaminated by emerging PMOCs. [ABSTRACT FROM AUTHOR]

Highlights: [•] Charge efficiency is directly related to flow rate and applied voltage. [•] 30–35% Of the energy consumed by CDI is for desorption of co-ions. [•] CDI electrosorption is driven by a physisorption according to thermodynamics. [•] The isotherm results were well represented by the Langmuir model. [Copyright &y& Elsevier]

• Floriform WO 3 /C electrode were developed for electrosorption of U(VI) from water. • The charge/discharge process of WO 3 /C primarily belongs to capacitive controlled behavior. • WO 3 /C electrodes achieve a maximum U(VI) electrosorption capacity of 449.9 mg g−1 at 1.2 V. • Electrosorption of U(VI) is credited to synergistic effect of EDLs and pseudocapacitance from WO 3 /C. Decontamination and recovery of uranium(VI) [U(VI)] from radioactive wastewater is vital to sustainable nuclear power production and reclamation of radioactive waste. As a promising technology of water treatment, capacitive deionization for adsorption of U(VI) started to attract attention. Herein, for the first time, a floriform WO 3 /C composite was developed as a pseudocapacitive electrode material for electrosorption of U(VI) from water. The as-prepared WO 3 /C composite was constructed from dozens of 2D nanosheets with a thin amorphous carbon layer, resulting in uniform flower-like particles with hierarchical nanostructure and superior open pore network. The charge/discharge process of WO 3 /C was demonstrated as prominent capacitive controlled behavior by quantization of capacitance contributions. As a result, the WO 3 /C electrodes achieved a maximum U(VI) electrosorption capacity of 449.9 mg g−1 at 1.2 V and good cycling stability after consecutive adsorption-desorption, which is superior to the conventional physical adsorption processes. The superior CDI performance of the WO 3 /C electrode is credited to the synergistic effect of EDLs and pseudocapacitance based on the combination of WO 3 and carbon layer with hierarchical nanostructure. Overall, the facile preparation strategy, the superior electrosorption performances, and the high cycling stability, endow the floriform WO 3 /C electrodes to be a promising electrode material for electrosorption of U(VI) from wastewater. [ABSTRACT FROM AUTHOR]