Search

The synthesis of 19 carefully selected Pt/γ‐Al2O3−Cl formulations was followed by high‐throughput catalytic testing in order to unravel the effect of an active phase formulation change on n‐heptane reforming performances. Pt/γ‐Al2O3−Cl catalysts were prepared with different Pt (0.3–1 %wt) and Cl (0.1–1.4 %wt) contents and using two γ‐Al2O3 supports so that both sites concentrations and sites locations at the crystallite surface vary among the catalyst pool. Catalytic tests were conducted in mild conditions for a comparison of catalysts in kinetic regime. Results show that Pt and Cl concentrations control the competition between hydroisomerisation, hydrogenolysis and hydrocracking pathways. Aromatisation, on the contrary, is poorly affected by formulation changes. Non‐monotonous trends linking Pt/Cl ratio to isomerisation selectivity are found for both γ‐Al2O3 supports. This study provides new insights for the description of bi‐functional transformations in catalytic naphtha reforming. [ABSTRACT FROM AUTHOR]

Pt/NaY zeolites with bulk and hollow morphologies have been used as model catalysts in the hydrogenation of cyclohexene as model reaction. In contrast to most hierarchical zeolites, the presence of a single internal cavity modifies only the mean diffusion length, without changing the external surface area and the crystal size. Differences in catalytic activities have been attributed to a shorter diffusion length in hollow crystals. The volume fraction of zeolite used in bulk crystals (ca. 0.63–0.70) matches well with the shell thickness in hollow crystals, leading to an efficiency factor value for the latter close to 1. No core needed! Why keep unused parts of catalysts? Removing the poorly accessible core of NaY crystals supporting Pt enabled the increase in the effectiveness factor of cyclohexene hydrogenation from 0.63 to 0.97, thus limiting the need of rare and expensive noble metals. [ABSTRACT FROM AUTHOR]

Abstract: Herein, we report the synthesis of two bipyridine‐based porous polymers and their use as platforms for the heterogenization of pentamethylcyclopentadienylrhodium catalytic species. These highly stable heterogeneous catalysts demonstrate their efficiency in the transfer hydrogenation of α‐aryl ketones. Moreover, we show that their catalytic activity is similar to that of homogeneous analogues, highlighting the absence of diffusion limitations in the solids. We rationalize the differences in the measured activities by using the Hammett parameter as a descriptor of the electronic environment of the catalytic site in both homogeneous and heterogeneous systems. [ABSTRACT FROM AUTHOR]

Multi-hollow silicalite-1 single crystals (MH) were prepared for the first time by an original synthesis pathway by using tetrabutylphosphonium hydroxide (TBPOH) as a mild desilicating agent. This new generation of hierarchical zeolite allowed the encapsulation of nanoparticles (NPs) featuring an enhanced confinement of the metallic guest and a thin wall thickness. The MH catalyst exhibited a better stability for methane steam reforming at 700 °C than a single-hollow counterpart (SH). Ni average particle size could be kept lower than 4 nm after 20 h on stream for the MH sample. However, a detailed analysis of kinetic data of the structure-insensitive CO methanation used as a model reaction revealed that the sample activity was adversely affected by two main factors deriving from the preparation steps. First, a siliceous over-layer derived from the decomposition of intermediate Ni phyllosilicates, which partly covered the resulting Ni nanoparticles. Second, phosphorus from the templates remained in the samples, probably forming a Ni-P compound upon reduction. The overall catalytic activities observed here were therefore a complex interplay of improved dispersion and poisonous effects. [ABSTRACT FROM AUTHOR]

NanoMOF: Hierarchical zeolitic imidazolate framework‐8 (ZIF‐8) nanocrystals catalyze esterification of glycerol with oleic acid at low temperature and become hierarchical (see TEM micrograph) upon local transformation of the framework. [ABSTRACT FROM AUTHOR]

The article offers information regarding conversion of carbon dioxide into bulk chemicals at lower energy cost. It discusses the activity of amine functionalized metal-organic frameworks. It presents the use of epoxide and carbon dioxide for the catalytic synthesis of cyclic carbonates. It investigates the various reaction involved which includes adsorption of carbon dioxide, acid-base-pair catalysis and the nucleophilic attack of the activated species.

of metal-organic frameworks is carried out in a novel fashion for the synthesis of single-site catalysts. Protection-deprotection methodologies open new perspectives to 'unlock' protected functionalities to obtain highly active and/or coordinating moieties on MOFs. This could facilitate the immobilization of organometallic catalysts inside MOF cavities. [ABSTRACT FROM AUTHOR]

The article offers information regarding conversion of carbon dioxide into bulk chemicals at lower energy cost. It discusses the activity of amine functionalized metal-organic frameworks. It presents the use of epoxide and carbon dioxide for the catalytic synthesis of cyclic carbonates. It investigates the various reaction involved which includes adsorption of carbon dioxide, acid-base-pair catalysis and the nucleophilic attack of the activated species.