Search

Research on the relationship of microstructure and properties of coated tools such as TiAlN and TiAlSiN plays a key role in obtaining the needed cutting performance in titanium machining. In this study, three kinds of coatings of TiAlN, TiAlSiN monolayer and TiAlN/TiAlSiN composite multilayer have been fabricated by magnetron sputtering method. It is found that the coating structure changes from columnar growth to nanocrystal growth by doping Si element. The TiAlN/TiAlSiN coating is composed by a coarse columnar TiAlN bottom layer and a fine nanocrystalline TiAlSiN top layer. Premature spalling problem (Lc2) is improved by forming the TiAlN/TiAlSiN multilayer structure. Titanium cutting experiment shows that the major wear mechanism of these coated tools is adhesive wear and chipping. The TiAlSiN coated tool has the longest cutting distance at various cutting speeds in these three kinds of coatings. This is because less built-up edge and chipping are generated at the cutting edge due to the dense nanocrystal structure, high hardness and good oxidation resistance of TiAlSiN coating. Therefore, the TiAlSiN coating with dense structure, high hardness and good oxidation resistance is recommended to use in high speed turning titanium. [ABSTRACT FROM AUTHOR]

Rotational speed has an important influence on the performance of coating materials. The a-C:Ta composite coatings were prepared by controlling the substrate rotational speed during deposition process using PVD technique. The results showed that the coating transformed from dense structure to columnar structure. Due to the changes of deposition time and the vapor incident angle of the sputtering ions, the sp2 hybrid structure increased and the C–Ta bonds contents decreased as a function of the rotational speed, which led to the improvement of adhesion force. The average friction coefficient of the composite coatings did not fluctuate significantly for the amorphous carbon matrix and the transfer films formed during friction, while the wear rates were gradually increased. The sample at 0.5 rpm possessed the lowest wear rate, which was mainly associated with the cooperative behavior of the dense structure and the formation of TaC nanoclusters in the composite coating. [ABSTRACT FROM AUTHOR]