Search

Engineering high performance cellular ceramics with both ultralow density and satisfactory compressive strength for practical applications still represents a grand challenge. Herein, alumina-based cellular ceramics bonded by in-situ formed mullite phase were constructed by Al 2 O 3 –Si-boehmite particle-stabilized foams. The gelation of boehmite sol improved the stability and harnessed the deformation of dried Al 2 O 3 –Si composite foam. The oxidation of silicon and further generation of in-situ mullite phase enhanced the chemical bond between alumina particles on cell walls, resulting in the superior mechanical properties. As an exemplar, the resulting cellular ceramic possessed the robust compressive strength of 2.26 MPa at a high porosity of 87.8%. The gelation-assisted Al 2 O 3 –Si particle-stabilized foams provide a facile and convenient strategy for construction of composite ceramic foams with high porosity and robust strength. [ABSTRACT FROM AUTHOR]

Ultralight ceramics with striking mechanical properties and improved pore connectivity could have wide applications in areas ranging from catalyst support to hot gas filtration. However, creating such materials has proven to be a challenging target. This work demonstrated a novel methodology to prepare porous MgAl 2 O 4 ceramics by calcining gelled MgO–Al 2 O 3 –SiO 2 particle-stabilized foams. The striking green strength of dried foams can be achieved as a consequence of MgO hydration and subsequent formation of gelled Mg(OH) 2 and MgO–SiO 2 –H 2 O skeleton. The decomposition of colloidal substance at elevated temperature resulted in the formation of small pores on the cell wall, thus forming the hierarchical porous architecture and improving the pore connectivity. The highly porous MgAl 2 O 4 ceramics fired at 1600°C possessed the integrated properties of ultrahigh porosity (87.0%), improved pore connectivity and satisfactory compressive strength (7.93 MPa), showing great potential to be used in multiple industrial fields. [ABSTRACT FROM AUTHOR]

Constructing high-performance air filters for high-temperature particulate matter (PM) removal is of great importance but remains challenging. Here we demonstrate the ceramic foam-based filters via polyurethane (PU) foaming using diatomite and kaolin powder as the starting materials. Diatomite was grafted by dodecanedioic acid (DA) to improve the dispersity in the PU slurry. The calcined products demonstrated a hierarchical pore structure with multiple well-controlled micron-sized window pores on the cell wall of the sub-micron bubble. The resulting products exhibited a high removal efficiency (96.3%) at a pressure drop of 33 Pa. This research showed that as-prepared ceramic foams can be potentially used as new high-temperature filters for high-temperature PM removal. [ABSTRACT FROM AUTHOR]