Search

Microwave heating has been applied to improve cement-based materials (CBMs) structures deicing efficiency, which reduce the effect of icing on their service life. Moreover, the enhanced thermal properties of CBMs can further improve their deicing efficiency. In this study, silicon carbide (SiC) ceramic particles with favorable thermal properties were used to prepare the SiC cement-based materials (SCBMs). The effect of SiC ceramic on the mechanical strength of CBMs was investigated. Next, the heat transfer and storage ability of CBMs were investigated to analyze the changes in their thermal-physical parameters. Then, the surface thermal responses of the CBMs during microwave heating and off were recorded to characterize their temperature evolution in a low-temperature condition. Furthermore, the deicing efficiency of CBMs was determined using the ice layer shedding time (ILST) as the index. The results show that the filling effect of SiC ceramic on CBMs improved their mechanical strength within a certain content range. However, a large content of SiC ceramic caused an increase in the weak area and porosity within the CBMs, further reducing their mechanical properties. The thermal-physical parameters of CBMs were improved after adding SiC ceramic. The thermal conductivity and thermal effusivity of SCBMs-100 were 13.17 W/(m·K) and 1.44 W/(mm2·K), respectively, 7.90 and 2.35 times higher than the control group. Due to the favorable thermal properties of SCBMs, their heating rate and surface temperature field distribution characteristics were further improved. Furthermore, with the increase of SiC ceramic content, the ILST of SCBMs was further reduced during microwave heating. Therefore, the SiC ceramic was a favorable material, improving the thermal properties and deicing efficiency of CBMs to a certain extent. However, considering its effect on the deterioration of the mechanical properties of CBMs, the optimal content of SiC ceramic might be 75%. [ABSTRACT FROM AUTHOR]