Search

The new technology of mineral wool production with Nickel–Iron alloy waste residue has excellent prospect of development and application. The viscosity and crystallization behavior of Nickel–Iron alloy waste residue significantly influence the production process of the mineral wool. In current work, the influences of basicity on the viscosity and crystallization for four Nickel–Iron alloy waste residues have been investigated by confocal scanning laser microscope and viscometer, respectively. The crystals morphologies are characterized by field scanning electron microscope, and the compositions are analyzed by energy dispersive spectroscopy. According to the results, it is obvious that the experimental slag crystallization behaviors are consistent with crystallization kinetic model (Johnson-Mehl-Avrami equation). The crystallization rate, the crystal size, and the crystallization ability of Nickel–Iron alloy waste residue increases with increasing the slag basicity from 0.03 to 0.53. The main crystalline product is protopyroxene for No. 1 and No. 2 slags, and olivine for No. 3 and No. 4 slags. However, the viscosity of Nickel–Iron alloy waste residue decreases with the increase of basicity. The precipitation process of crystal has great influence on the viscosity of slag, and the influence degree of different crystal types is different. When the crystals in the slag grow up to a certain extent, the viscosity of the slag will increase dramatically. [ABSTRACT FROM AUTHOR]

Ti–Si–Fe alloys extracted from high-titanium blast furnace slag were utilized to replace part of the silicon powders, and then nitride/oxynitride bonded SiC ceramics were prepared by reactive sintering in graphite bed. Ti–Si–Fe alloys could react with CO/N 2 at a low temperature (1200 °C), and the addition of Ti–Si–Fe alloys could reduce the nitriding temperature of Si. Density functional theory calculations suggested that Ti–Si–Fe alloys enhanced reaction activity via weakening the strength of C O and N N bonds. The regional equilibrium phase diagrams of Si–C–N–O and Ti–Si–C–N–O under CO/N 2 atmosphere were calculated by thermodynamics. The change of whiskers morphology was observed by scanning electron microscope. Furthermore, the bulk density, the cold modulus of rupture, and the cold compressive strength improved with Ti–Si–Fe alloys content. The results showed that the addition of Ti–Si–Fe alloys not only significantly promoted nitriding of Si and formation of Si 3 N 4 whiskers, but also improved the mechanical properties of the samples. [ABSTRACT FROM AUTHOR]