Search

It has been reported that grain size has significant influence on the dielectric properties of barium strontium titanate (BST) thin films. In this paper we have proposed a multilayer structure in which BST layers are separated by thin MgO layers which are expected to function as barrier to atomic diffusion so that the grain size of BST could be confined. By simulation we have found that for a device with a coplanar/composite film/substrate configuration, the introduction of MgO can effectively change the dielectric constant of the composite while the tunability is not significantly affected, provided the amount of MgO is smaller than 25%. A prototype device was prepared to demonstrate the feasibility of this idea. By X-ray diffraction measurements it is revealed that BST and MgO coexist in the composite. The dielectric property of the composite film was determined and it was found that the film has a tunability of up to ~7% at 500 MHz and under an electric field of 13.3 kV/mm. [ABSTRACT FROM AUTHOR]

Barium Strontium Titanate (Ba 1-x Sr x TiO 3 , BST) possesses the advantages of high permittivity, low remnant polarization and dielectric loss, suggesting great potential in the application of power capacitors. However, the low maximum polarization severely restricts the achievement of outstanding energy storage properties (ESP). Herein, we design a lead-free bulk ceramic: (1-x)Ba 0. 55 Sr 0 · 45 TiO 3 -xBi 0.5 Na 0. 5 TiO 3 [(1-x)BST-xBNT] (x = 0.1–0.4), prepared by two-step solid-state reaction method. The introduction of BNT contributes to (1) the boost of maximum polarization (from 21 μC/cm2 up to 32.6 μC/cm2) due to Bi3+ lone pair covalent effect (2) strong relaxor behavior (1.71≪ γ 1.84) derived from weakly coupled nanopolar regions, which can be verified by high activation energy E a = 0.341 eV at x = 0.3, improves the ESP and thermal stability of the ceramics. According to the above strategies, high W rec = 1.73 J/cm3 and η = 84.4% are achieved in the 0.7BST-0.3BNT ceramics at 206 kV/cm, which is preferable to the previous results regarding BST-based bulk ceramics. The excellent thermal stability (20–120 °C), frequency stability (1–500 Hz), as well as anti-fatigue characteristic (cycling number: 105) were obtained in the 0.7BST-0.3BNT. Furthermore, 0.7BST-0.3BNT ceramics exhibit high-power density (P D = 44.9 MW/cm3) and rapid discharge rate (t 0.9 = 99.2 ns) from 20 °C to 120 °C. This work provides a feasible way to achieve good energy storage and charge-discharge properties for pulse power energy storage systems. [ABSTRACT FROM AUTHOR]