Search

Due to the high demand for dielectric materials with high energy density, the energy storage performance of antiferroelectric ceramic capacitors has always gained much attention. Polarization intensity is a key factor that is closely related to the energy storage density. However, thus far, there has been a lack of research studies or successful methods to effectively modulate polarization intensity. The behavior of the polarization process is complex and contains domain nucleation, growth, and flip-flapping. Based on this finding, the introduction of Nb5+ at the B-site was designed to influence the three stages of antiferroelectric polarization by regulating the balance between the ferroelectric and antiferroelectric phases, and eventually realized regulation of the saturation polarization intensity in the (Pb 1-1.5x La x)(Zr 0.5 Sn 0.43 Ti 0.07)O 3 antiferroelectric ceramics. The saturation polarization intensity has increased from 25.56 to 42 μC/cm2 with Nb5+ content increases from 0 to 4 mol% and the hysteresis was kept low, Pb 0.94 La 0.04 (Zr 0.65 Sn 0.35) 0.975 Nb 0.02 O 3 is the optimal component with a high releasable energy density of 8.26 J/cm3 and an energy storage efficiency of 90.31%. This work provides an in-depth explanation of the microscopic mechanism of antiferroelectric ceramic polarization and presents a novel approach for the composition design of high-energy storage density antiferroelectric ceramics. [ABSTRACT FROM AUTHOR]

Barium Strontium Titanate (Ba 1-x Sr x TiO 3 , BST) possesses the advantages of high permittivity, low remnant polarization and dielectric loss, suggesting great potential in the application of power capacitors. However, the low maximum polarization severely restricts the achievement of outstanding energy storage properties (ESP). Herein, we design a lead-free bulk ceramic: (1-x)Ba 0. 55 Sr 0 · 45 TiO 3 -xBi 0.5 Na 0. 5 TiO 3 [(1-x)BST-xBNT] (x = 0.1–0.4), prepared by two-step solid-state reaction method. The introduction of BNT contributes to (1) the boost of maximum polarization (from 21 μC/cm2 up to 32.6 μC/cm2) due to Bi3+ lone pair covalent effect (2) strong relaxor behavior (1.71≪ γ 1.84) derived from weakly coupled nanopolar regions, which can be verified by high activation energy E a = 0.341 eV at x = 0.3, improves the ESP and thermal stability of the ceramics. According to the above strategies, high W rec = 1.73 J/cm3 and η = 84.4% are achieved in the 0.7BST-0.3BNT ceramics at 206 kV/cm, which is preferable to the previous results regarding BST-based bulk ceramics. The excellent thermal stability (20–120 °C), frequency stability (1–500 Hz), as well as anti-fatigue characteristic (cycling number: 105) were obtained in the 0.7BST-0.3BNT. Furthermore, 0.7BST-0.3BNT ceramics exhibit high-power density (P D = 44.9 MW/cm3) and rapid discharge rate (t 0.9 = 99.2 ns) from 20 °C to 120 °C. This work provides a feasible way to achieve good energy storage and charge-discharge properties for pulse power energy storage systems. [ABSTRACT FROM AUTHOR]

In this work, TiO 2 nanowire arrays embedded in PbZrO 3 -based antiferroelectric (AFE) films were fabricated on FTO/glass substrates using a facile two-step method. The energy storage performance was modulated by changing the density and morphology of TiO 2 nanowire arrays. A large recoverable energy density (W re) of 50.6 J/cm3 and efficiency (η) of 61% were achieved, which was attributed to the enhancement of maximum polarization and breakdown strength by constructing TiO 2 nanowire arrays in AFE films. More importantly, the composite films exhibited excellent thermal stability with the variation of energy storage density (<5%) and efficiency (<7%) in a wide temperature range (−120 to 130 °C) at the operating electric field of 1300 kV/cm. The results demonstrate that the composite films have huge potential in the future energy storage applications, whether in cold polar regions or high temperature regions. [ABSTRACT FROM AUTHOR]