Search

Porosity is a key feature in dictating the overall performance of biomedical scaffolds, with special relevance to mechanical properties. Usually, compressive strength and elastic modulus are the main parameters used to determine the potential mechanical suitability of porous scaffolds for bone repair. However, their assessment may not be so easy from an experimental viewpoint and, especially if the porosity is high, so reliable for brittle bioceramic foams. Hence, assessing the relationship between porosity and mechanical properties based only on the constitutive parameters of the solid material is a challenging and important task to predict the scaffold performance for optimization during design. In this work, a set of equations was used to predict the compressive strength and elastic modulus of bone-like hydroxyapatite scaffolds produced by digital light processing-based vat photopolymerization (total porosity about 80 vol.%). The compressive strength was found to depend on total porosity, following a power-law approximation. The relationship between porosity and elastic modulus was well fitted by second-order power law, with relative density and computational models obtained by numerical simulations.

Implantation of three-dimensional (3D) bioactive glass-derived porous scaffolds is an effective strategy for promoting bone repair and regeneration in large osseous defect sites. The present study intends to expand the potential of a SiO2–P2O5–CaO–MgO–Na2O–CaF2 glass composition, which has already proven to be successful in regenerating bone in both animals and human patients. Specifically, this research work reports the fabrication of macroporous glass–ceramic scaffolds by the foam replica method, using the abovementioned bioactive glass powders as a parent material. The sinter-crystallization of the glass powder was investigated by hot-stage microscopy, differential thermal analysis, and X-ray diffraction. Scanning electron microscopy was used to investigate the pore–strut architecture of the resultant glass–ceramic scaffolds in which diopside, fluorapatite, and wollastonite crystallized during thermal treatment. Immersion studies in simulated body fluids revealed that the scaffolds have bioactive behavior in vitro; the mechanical properties were also potentially suitable to suggest use in load-bearing bone applications.