Search

Aerospace propulsion systems are among the driving forces for the development of advanced ceramics with increased performance efficiency in severe operation conditions. The conducted research focused on the mechanical (Young’s and shear moduli, flexural strength, hardness, and fracture toughness), thermal (thermal conductivity and coefficient of thermal expansion), and electric (dielectric properties) characterization of MgO-Al2O3, MgO-CaZrO3, and stable YSZ ceramic composites. The experimental results, considering structural and functional traits, underscore the importance of a holistic understanding of the multifunctionality of advanced ceramics to fulfill propulsion system requirements, the limits of which have not yet been fully explored.

Plasma actuators have demonstrated great potential for active flow control applications, including boundary layer control, flow separation delay, turbulence control, and aircraft noise reduction. In particular, the material used as a dielectric barrier is crucial for the proper operation of the device. Currently, the variety of dielectrics reported in the literature is still quite restricted to polymers including Kapton, Teflon, poly(methyl methacrylate) (PMMA), Cirlex, polyisobutylene (PIB) rubber, or polystyrene. Nevertheless, several studies have highlighted the fragilities of polymeric dielectric layers when actuators operate at significantly high-voltage and -frequency levels or for long periods. In the current study, we propose the use of alumina-based ceramic composites as alternative materials for plasma actuator dielectric layers. The alumina composite samples were fabricated and characterized in terms of microstructure, electrical parameters, and plasma-induced flow velocity and compared with a conventional Kapton-based actuator. It was concluded that alumina-based dielectrics are suitable materials for plasma actuator applications, being able to generate plasma-induced flow velocities of approximately 4.5 m/s. In addition, it was verified that alumina-based ceramic actuators can provide similar fluid mechanical efficiencies to Kapton actuators. Furthermore, the ceramic dielectrics present additional characteristics, such as high-temperature resistance, which are not encompassed by conventional Kapton actuators, which makes them suitable for high-temperature applications such as turbine blade film cooling enhancement and plasma-assisted combustion. The high porosity of the ceramic results in lower plasma-induced flow velocity and lower fluid mechanical efficiency, but by minimizing the porosity, the fluid mechanical efficiency is increased.

The quest for increased performance in the aeronautical and aerospace industries has provided the driving force and motivation for the research, investigation, and development of advanced ceramics. Special emphasis is therefore attributed to the ability of fine ceramics to fulfill an attractive, extreme, and distinguishing combination of application requirements. This is impelled by ensuring a suitable arrangement of thermomechanical, thermoelectric, and electromechanical properties. As a result, the reliability, durability, and useful lifetime extension of a critical structure or system are expected. In this context, engineered ceramic appliances consist of three main purposes in aeronautical and aerospace fields: thermal protection systems (TPS), thermal protection barriers (TBC), and dielectric barrier discharge (DBD) plasma actuators. Consequently, this research provides an extensive discussion and review of the referred applications, i.e., TPS, TBC, and DBD, and discusses the concept of multifunctional advanced ceramics for future engineering needs and perspectives.

A thermal protection system is subject to high forces, in particular compression, bending and wear, to aggressive environments of high temperatures, high velocity gases and particle shock. Typically, ceramic materials appear as a first barrier or outer shield over a metallic substrate responsible for the structure. When it comes to a coating due to the small thickness, the particles of the raw material are sub-micron scale, but when a shield with a few centimeters is built its structural and economic viability requires the use of wider particle size distributions. In this work, a ceramic fine-grained matrix of CaO-ZrO2-MgO was reinforced with commercial coarse Al2O3 particles. The results show that for larger size distributions, CZM-4A, replacing 63% of fine-grained matrix by coarse Al2O3 particles, the dimensional stability is obtained (ΔL = 5%) and the good mechanical properties such as flexural strength of 154 MPa, elastic modulus of 286 GPa, and hardness of 8.5 GPa, which allows to propose this ceramic composite for a structural application.