Search

Following the core theme of a circular economy, a novel strategy to upcycle cigarette butt waste into platinum group metal (PGM)-free metal nitrogen carbon (M-N-C) electrocatalysts for oxygen reduction reaction (ORR) is presented. The experimental route was composed of (i) the transformation of the powdered cigarette butts into carbonaceous char via pyrolysis at 450 °C, 600 °C, 750 °C and 900 °C, (ii) the porosity activation with KOH and (iii) the functionalization of the activated chars with iron (II) phthalocyanine (FePc). The electrochemical outcomes obtained by the rotating disk electrode (RRDE) technique revealed that the sample pyrolyzed at 450 °C (i.e., cig_450) outperformed the other counterparts with its highest onset (Eon) and half-wave potentials (E1/2) and demonstrated nearly tetra-electronic ORR in acidic, neutral and alkaline electrolytes, all resulting from the optimal surface chemistry and textural properties. [ABSTRACT FROM AUTHOR]

A comparison between different carbon-based gas-diffusion air-breathing cathodes for microbial fuel cells (MFCs) is presented in this work. A micro-porous layer (MPL) based on carbon black (CB) and an activated carbon (AC) layer were used as catalysts and applied on different supporting materials, including carbon cloth (CC), carbon felt (CF), and stainless steel (SS) forming cathode electrodes for MFCs treating urine. Rotating ring disk electrode (RRDE) analyses were done on CB and AC to: (i) understand the kinetics of the carbonaceous catalysts; (ii) evaluate the hydrogen peroxide production; and (iii) estimate the electron transfer. CB and AC were then used to fabricate electrodes. Half-cell electrochemical analysis, as well as MFCs continuous power performance, have been monitored. Generally, the current generated was higher from the MFCs with AC electrodes compared to the MPL electrodes, showing an increase between 34% and 61% in power with the AC layer comparing to the MPL. When the MPL was used, the supporting material showed a slight effect in the power performance, being that the CF is more powerful than the CC and the SS. These differences also agree with the electrochemical analysis performed. However, the different supporting materials showed a bigger effect in the power density when the AC layer was used, being the SS the most efficient, with a power generation of 65.6 mWºm-2, followed by the CC (54 mWºm-2) and the CF (44 mWºm-2). [ABSTRACT FROM AUTHOR]

Catalysts, artificially or naturally generated, are often considered to be important factors in numerous chemical processes. Although each catalyst can act under its own characteristics, the efficiency of chemical interactions can be enhanced by a balanced combination of different catalysts. On the other hand, many game-theoretical results have been widely applied to seek the optimal or balanced state for efficiency regulation, resource control, portfolio allocation, and behavior simulation in modern academic literature. Based on game-theoretical approaches under actual chemical and biochemical environments, this article aims to analyze, construct, simulate, and derive the most efficient optimal or balanced combinations for a group of catalysts with different conditions and actions. In this article, a power index is proposed by simultaneously focusing on the factors and its active levels. In order to analyze the accuracy and rationality of this power index, we adopt usual axioms to offer some characterizations. In conjunction with the constructed game-theoretical results that are related to chemical and biochemical environments, this article further analyzes, verifies, and demonstrates the validity, accuracy, feasibility, plausibility, and applicability of the combination of catalysts with different conditions and actions. [ABSTRACT FROM AUTHOR]

Platinum deposited on dispersed materials has so far been the most demanded catalyst for creating cathodes for a wide range of electrochemical power sources. This paper sets out to investigate the effect of carbon nanotube (CNT) modification by O, N, and P atoms on the structural, electrocatalytic, and corrosion properties of the as-synthesized monoplatinum catalysts. The investigated Pt/CNTmod catalysts showed an increased electrochemically active platinum surface area and electrical conductivity, as well as an increased catalytic activity in the oxygen reduction reaction (ORR) in alkaline electrolytes. The improved characteristics of Pt/CNT catalysts are explained by alterations in the composition and number of groups, which are formed on the CNT surface, and their electronic structure. By the sum of the main characteristics, Pt/CNTHNO3+N and Pt/CNTHNO3+NP are the most promising catalysts for use as cathode materials in alkaline media. [ABSTRACT FROM AUTHOR]

A glassy carbon electrode (GCE) coated with delafossite CuCrO2 loading on the nitrogen-doped reduced graphene oxide (N-rGO) and multiwalled carbon nanotubes (MWCNT) composite (N-rGO-MWCNT/CuCrO2) was applied to the hydrogen evolution reaction and Bisphenol-A (BPA) detection. First, the N-rGO-MWCNT composite was prepared by in situ chemical reduction with caffeic acid as a reducing agent. Then, CuCrO2 was accumulated on the N-rGO-MWCNT surface to form N-rGO-MWCNT/CuCrO2 composite. The morphology structure of the N-rGO-MWCNT/ CuCrO2 composite was analyzed by different characterization techniques. Besides, the GCE/N-rGO-MWCNT/CuCrO2 composite electrode was investigated for hydrogen evolution reaction (HER), which shows an excellent electrocatalytic activity with a low over-potential, increasing reduction current, and a small Tafel slope of 62 mV·dec−1 at 10 mA·cm−2 with long-term stability. Moreover, the electrochemical determination of BPA was in the range of 0.1-110 µM, and low detection limit of 0.033 µM (S/N = 3) with a higher sensitivity of 1.3726 µA µM−1 cm−2. Furthermore, the prepared GCE/N-rGO-MWCNT/CuCrO2 electrode shows effective detection of BPA in food samples with acceptable recoveries. Hence, the finding of GCE/N-rGO-MWCNT/CuCrO2 can be observed as an impressive catalyst to the electrocatalytic activity of HER and BPA oxidation. [ABSTRACT FROM AUTHOR]

In neutral medium (pH 7.0) [RuIIIRuII(µ-CO3)4(OH)]4− undergoes one electron oxidation to form [RuIIIRuIII(µ-CO3)4(OH)2]4− at an E1/2 of 0.85 V vs. NHE followed by electro-catalytic water oxidation at a potential ≥1.5 V. When the same electrochemical measurements are performed in bicarbonate medium (pH 8.3), the complex first undergoes one electron oxidation at an Epa of 0.86 V to form [RuIIIRuIII(µ-CO3)4(OH)2]4−. This complex further undergoes two step one electron oxidations to form RuIVRuIII and RuIVRuIV species at potentials (Epa) 1.18 and 1.35 V, respectively. The RuIVRuIII and RuIVRuIV species in bicarbonate solutions are [RuIVRuIII(µ-CO3)4(OH)(CO3)]4− and [RuIVRuIV(µ-CO3)4(O)(CO3)]4− based on density functional theory (DFT) calculations. The formation of HCO4− in the course of the oxidation has been demonstrated by DFT. The catalyst acts as homogeneous water oxidation catalyst, and after long term chronoamperometry, the absorption spectra does not change significantly. Each step has been found to follow a proton coupled electron transfer process (PCET) as obtained from the pH dependent studies. The catalytic current is found to follow linear relation with the concentration of the catalyst and bicarbonate. Thus, bicarbonate is involved in the catalytic process that is also evident from the generation of higher oxidation peaks in cyclic voltammetry. The detailed mechanism has been derived by DFT. A catalyst with no organic ligands has the advantage of long-time stability. [ABSTRACT FROM AUTHOR]