Search

The research presented in this paper addresses the question: How does the addition of a small amount of LaCoO3 impact the activity of a Co3O4 catalyst? By testing such a catalyst in N2O decomposition under conditions at which the thermal decomposition of Co3O4 to CoO is possible, one gains unique insight into how the two phases interact. The activity of such a catalyst increases in the entire studied temperature range, unlike the activity of the undoped cobalt catalyst which is lower at 850 °C than at 800 °C due to the reduction of Co3O4 to CoO. XRD measurements showed that CoO was also the main cobalt oxide present in the Co3.5La catalyst after operating at 850 °C, as did the XPS measurements, but there was no drop of activity associated with this change. The influence of NO, O2 and H2O on the activity of the new catalyst, Co3.5La, was determined. Lack of positive effect of NO, a known oxygen scavenger, on the activity was noticed at all temperatures, showing that the effect of LaCoO3 is probably due to increased oxygen desorption. Temperature programed oxidation (TPO) tests showed that the beneficial effects of the presence of LaCoO3 on the activity of cobalt oxide at 850 °C were probably caused by enhanced diffusion of O2− anions through the entire catalyst, which facilitates desorption of oxygen molecules from the surface.

Gold (3 wt. %) catalysts on Y-doped (1, 2.5, 5 and 7.5 wt. % Y2O3) ceria supports prepared by coprecipitation (CP) or impregnation (IM) were studied in complete benzene oxidation (CBO). A low-extent Y modification was chosen to avoid ordering of oxygen vacancies. The samples were characterized by XRD, TGA, XPS and TPR techniques. A positive role of air pretreatment at 350 °C as compared to 200 °C was established for all Y-containing catalysts and it was explained by cleaning the active sites from carbonates. The oxygen supply cannot be considered as a limiting step for benzene oxidation except for the high 7.5%-doped samples, as suggested by TGA and TPR data. On the basis of XPS results of fresh and used in CBO catalysts, the presence of cationic gold species does not seem important for high CBO activity. The gold catalyst on an IM support with 1% Y-doping exhibited the best performance. A 100% benzene conversion was achieved only over this catalyst and Au/ceria, while it was not reached even at 300 °C over all other studied catalysts. Gold and ceria particle agglomeration or coke formation should be excluded as a possible reason, and the most probable explanation could be associated with the importance of the benzene activation stage.