Search

The current emissions of CO2 to the atmosphere through man-made activities are outlined and the options for recycling CO2 for some useful purpose, as distinct from simply storing or disposing it in an environmentally-benign manner, are discussed. It is shown that for CO2 recycling to have any significant impact on reducing emissions of this gas, it must form part of some large-scale energy conversion process which is based on a non-fossil-fuel energy source such as solar or nuclear energy. Since the quantities of undiluted CO2 available for recycling are relatively small, the cost of recovering CO2 from sources such as power station flue gas must be taken into account in the overall CO2 recycling/energy conversion scheme.

The oxidative coupling of methane has been conducted in 30 and 60mm dia. fluidised-bed reactors. Methane conversions as high as 40% were achieved at isothermal conditions using methane/oxygen mixtures without diluents. At the same contact time the two reactors had similar selectivities to hydrocarbons. At 850°C the hydrocarbon selectivity decreased dramatically with increasing contact time but this effect was much less severe at lower temperatures. Axial gas concentration profiles through the catalyst bed in the 60mm reactor indicated that at 850°C there was a rapid consumption of oxygen and formation of products in the bottom section of the bed followed by a net loss of hydrocarbon in the oxygen-free zone. This loss was due to carbon formation on the catalyst which was circulated back to the oxygen-containing zone of the bed where the carbon was combusted.

A small fluidised-bed reactor has been used by the CSIRO Division of Coal Technology to study the oxidative coupling of methane to higher hydrocarbons. Methane conversions of 9.6 to 13.5% were obtained in preliminary experiments using a lithium-promoted magnesium oxide catalyst at 850°C and with feed gases containing 5.6 to 10.7% v/v oxygen. Total hydrocarbon selectivity declined from 82 to 72% with increasing methane conversion. When operating with ethane in the feed at concentrations found in natural ethylene, the fluidised-bed reactor converted the ethane with good selectivity to ethylene, a key result in the context of using oxidative coupling for natural gas conversion. In view of these promising results, current work is directed towards increasing methane conversion and hydrocarbon selectivity in fluidised-bed reactors by development of more active and selective catalysts.