Search

Petroleum-based packaging have been developed during the last century to transport and protect many products, regardless of the field of applications (food, electronics, cosmetics, leisure, etc.). Such protection has been very useful for the development of our society by favoring economic growth, limiting food waste and product deterioration, and consequently avoiding strong environmental impacts. An environmental concern has now been taken into consideration by numerous countries, with several legislations being promulgated to avoid or limit plastic waste. In this context, cellulose emerges as an alternative material for packaging applications since it is bio-based, biodegradable, and in most cases recyclable in an existing stream. However, most of the existing cellulose packaging is based on roll-to-roll 2D products or plied boxes and is not suitable to substitute plastics in 3D-shaped packaging. Recently, the interest in molded cellulose has increased exponentially thanks to new adaptations of raw materials and processes. Alternatively, research groups and companies try to adapt the injection molding to the production of cellulose-based packaging solutions. This review details for the first time the various processes and recent works in this direction. After proposing the basics of cellulose, this work focuses on the different types of molded cellulose and the novel strategies to produce 3D cellulose-based materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Nowadays, drug encapsulation and drug release from cellulose nanofibrils systems are intense research topics, and commercial grades of cellulose nanomaterials are currently available. In this work we present an ester-containing prodrug of metronidazole that is covalently bound to cellulose nanofibrils in aqueous suspension through a two-step immobilization procedure involving green chemistry principles. The presence of the drug is confirmed by several characterization tools and methods such as Raman spectroscopy, elemental analysis, Dynamic Nuclear Polarization enhanced NMR. This technique allows enhancing the sensitivity of NMR by several orders of magnitude. It has been used to study cellulose nanofibrils substrates and it appears as the ultimate tool to confirm the covalent nature of the binding through thiol-yne click chemistry. Moreover, the ester function of the immobilized prodrug can be cleaved by specific enzyme activity thus allowing controlled drug release., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The breakdown and buildup mechanisms in concentrated cellulose nanocrystal (CNC) suspensions under shear and during relaxation upon cessation of shear were accessed by small-angle X-ray and light scattering combined with rheometry. The dynamic structural changes over nanometer to micrometer lengthscales were related to the well-known three-regime rheological behavior. In the shear-thinning regime I, the large liquid crystalline domains were progressively fragmented into micrometer-sized tactoids, with their cholesteric axis aligned perpendicular to the flow direction. The viscosity plateau of regime II was associated to a further disruption into submicrometer-sized elongated tactoids oriented along the velocity direction. At high shear rate, regime III corresponded to the parallel flow of individual CNCs along the velocity direction. Upon cessation of flow, the relaxation process occurred through a three-step buildup mechanisms: i) a fast reassembling of the individual CNCs into a nematic-like organization established up to micrometer lengthscales, ii) a slower formation of oriented large cholesteric domains, and iii) their isotropic redistribution., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Cellulose nanofibrils were efficiently produced from eucalyptus fibers using a combined NaOH and enzymatic treatment followed by a pilot scale grinding process. The structural changes of fibers were assessed after NaOH treatments at 5, 10 and 15 wt% concentrations. A progressive shift from a cellulose I to a cellulose II crystalline structure was observed with X-ray diffraction (XRD) and nuclear magnetic resonance (NMR). The further enzymatic hydrolysis was improved for the NaOH treated samples. The increase of crystallinity indices due to enzymatic hydrolysis was of + 4.7 %, + 3.5 %, and +10.3 % for samples treated with NaOH 5, 10 and 15 wt% respectively, and DP values were drastically reduced to 340, 190 and 166 respectively. A morphological analysis underlined an optimum with the combination of NaOH 10 wt% and enzymatic hydrolysis. This treatment followed by the grinding process resulted in CNF with a rigid structure, with diameters ranging from 10 to 20 nm and lengths between 150 and 350 nm. A multi-scale analysis enabled to study the impact of this combined treatment on CNF properties and energy consumption. A decrease in mechanical properties of nanopapers was observed for the combined treatment and NaOH treatment alone compared to enzymatic hydrolysis alone, with Young's modulus of 8.94, 4.84 and 11.21 GPa respectively. However, optical properties were improved, with transmittance values of 42.2, 15.4 and 7.1 % respectively. This new pretreatment can therefore lead to CNF with tunable properties depending on the application, with possible industrialization thanks to the reduction of energy needs., (Copyright © 2020. Published by Elsevier Ltd.)

This short communication describes the climate change impacts of using cellulose, and more precisely cellulosic fiber-based materials, in food packaging, representing current and emerging industrial state of the art technology, without specific reference to current scientific advances. First, the different types of cellulosic fiber-based packaging materials, which can be used to replace fossil-based packaging materials, are presented for flexible and rigid applications. The focus is on technological solutions with packaging properties that enable the protection of commonly sold food products. The manufacturing processes associated with these cellulosic fiber-based materials is described and the environmental impact assessment of 4 selected case studies presented: stand-up pouches, flexible flow wraps, frozen or chilled food trays, and molded pulp lids. A simplified eco-design Life Cycle Assessment (LCA) was then performed to compare each solution with its fossil-based counterpart. Differences and similarities between the various cellulosic solutions have been identified. Furthermore, the assessment confirms that cellulosic fiber-based materials have reduced environmental impacts as compared to fossil-based counterparts, if a similar packaging weight is obtained. Indeed, all impacts of plastics are between 3 and 5 kg CO 2 eq/kg, while all impacts of cellulosic fiber-based materials are below 1.5 kg CO 2 eq/kg., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

This work is focused on the modification of the interphase zone in short flax fibres / polypropylene (PP) composites by a bio-inspired modification of fibres called "nanostructuration" that uses the adsorption of biomass by-products, i.e. cellulose nanocrystals (CNC) and xyloglucan (XG), to create hierarchical flax fibres. The wettability and interfacial adhesion study reveals a strong decrease in the polar character of CNC modified flax fibres, hence increasing the work of adhesion with PP. Moreover, combining XG/CNC modified interphases with MAPP coupling agent enhances the ultimate mechanical properties of biocomposites with higher tensile strength and work of rupture, and modifies failure mechanisms as revealed by in situ micro-mechanical tensile SEM experiments. Bio-based hierarchical composites inspired by naturally occurring nanostructures open a new path for the development of sustainable composites with enhanced structural properties., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Green treatment of natural fibres is a major issue in paper, textile and biocomposites industries to design innovative and eco-friendly products. In this work, hierarchical structuring of flax woven fabrics by the adsorption of xyloglucan (XG) and cellulose nanocrystals (CNC) is studied. Indeed, CNC have high mechanical properties, high specific surface area and great potential for functionalization. The adsorption of XG and CNC has been investigated in terms of localization by confocal and scanning electron microscopy (SEM) and quantification through adsorption isotherms. Adhesion force measurements have also been performed by Atomic Force Microscopy (AFM). XG and CNC are homogeneously adsorbed on flax fabric and adsorption isotherms reach plateau values around 20 mg /g fibres for both. The pre-adsorption of XG on flax fabric influences the amount of adsorbed CNC in the high concentrations and also creates entanglements and strong interactions between XG and CNC with the formation of an extensible network., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Crosslinking with genipin increases the acidic stability of chitosan-based materials, opening an opportunity to explore new applications. In this work, the viability of using chitosan-genipin solutions on cellulose-based materials coating was studied. Non-calendered paper and cardboard were used as raw materials. Different number of chitosan-genipin coating layers (1, 3, 6, 20, and 30) were applied and their influence on the materials mechanical, physicochemical, and barrier properties was studied. The small thickness and basis weight of non-calendered paper resulted in an inefficient adhesion of chitosan-genipin coating to the cellulose fibers. However, in cardboard, chitosan-genipin created a dense layer onto the cellulosic-fibers surface without impairing their mechanical properties. It conferred a greenish color, whose intensity increased with the layers number. The chitosan-genipin coating decreased the cardboard air and water vapor permeability up to 71 % and 52 %, respectively, and acted as a physical barrier for cardboard compounds leaching, being suitable for covering cellulose-based materials., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

An active ink composed of cellulose nanofibrils and silver nanowires was deposited on flexible and transparent polymer films using the bar coating process, achieving controlled thicknesses ranging from 200 nm up to 2 μm. For 350 nm thick coating on polyethylene terephthalate films, high transparency (75.6% transmittance) and strong reduction of bacterial growth equal to 89.3% and 100% was noted respectively against Gram-negative Escherichia Coli and Gram-positive Staphylococcus Aureus bacteria using AATCC contact active standard test. Retained antibacterial activity was found with films produced by reverse gravure roll-to-roll process, showing the promising capability of this antibacterial solution to be deployed industrially. Finally, the same ink was also deposited on polylactic acid substrate to investigate barrier properties: for 350 nm thick coating, a reduction of 49% of oxygen transmission rate (dry conditions) and 47% reduction of water vapor transmission rate was noted, proving the enhanced barrier properties of the coatings., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Cellulose nanocrystals (CNCs) are used to design nanocomposites because of their high aspect ratio and their outstanding mechanical and barrier properties. However, the low compatibility of hydrophilic CNCs with hydrophobic polymers remains a barrier to their use in the nanocomposite field. To improve this compatibility, poly(glycidyl methacrylate) (PGMA) was grafted from CNCs containing α-bromoisobutyryl moieties via surface-initiated atom transfer radical polymerization. The novelty of this research is the use of a reactive epoxy-containing monomer that can serve as a new platform for further modifications or crosslinking. Polymer-grafted CNC-PGMA-Br prepared at different polymerization times were characterized by XRD, DLS, FTIR, XPS and elemental analysis. Approximately 40 % of the polymer at the surface of the CNCs was quantified after only 1 h of polymerization. Finally, nanocomposites prepared with 10 wt% CNC-PGMA-Br as nanofillers in a poly(lactic acid) (PLA) matrix exhibited an improvement in their compatibilization based on SEM observation., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Chemical modifications of cellulose fibers as pretreatment for cellulose nanofibrils (CNF) production have been investigated to improve the production process and the quality of obtained cellulosic nanomaterial. In this study, phosphorylation of cellulose fibers was done in anticipation of a future nanofibrillation. Different phosphate salts, namely NH 4 H 2 PO 4 , (NH 4 ) 2 HPO 4 , Na 2 HPO 4 , NaH 2 PO 4 and LiH 2 PO 4 with different constants of solubility (Ks) were used to increase the efficiency of the modification. Phosphorylated cellulose pulps were analyzed using elemental analysis, solid-state 13 C and 31 P NMR, or conductimetric titration method. No effect of Ks was observed whereas a counterion effect was pointed out. The study also reported the effect of pH, cellulose consistency, temperature and urea content in phosphorylation efficiency. Finally, chemical functionalization and penetration of phosphorylation reagents in the cellulose fibers were evaluated using XPS, SEM-EDX, ToF-SIMS and solid-state NMR., (Copyright © 2019. Published by Elsevier Ltd.)

In this paper, strictly speaking aerogels of cellulose nanofibrils (CNFs) and TEMPO-oxidized CNFs (TO-CNFs) were obtained from an optimized supercritical drying processes and cryogels were prepared after freeze-drying. The cryogels and aerogels were characterized and the influence of the preparation process on the resulting properties was studied. Significant differences were observed in the micro- and nanoscale organization of the porous structures. In addition, the specific surface areas measured varied from 25 to 160 m² g -1 for CNF materials, depending on the preparation process. Very high specific surface areas up to 482 m² g -1 among the highest reported for pure cellulose nanofibrils porous materials were achieved for TO-CNF aerogels. Finally, in order to evaluate their aptitudes for wound dressings applications, the capillary water uptake capacities were assessed on skin mimicking layers. From this study, it was revealed that TO-CNF aerogels can absorb almost 120 times their own weight of water., (Copyright © 2019. Published by Elsevier Ltd.)

This study proposes a grafting strategy of thermo-sensitive amine-terminated oligomers of Poly(N-Isopropylacrylamide) (Pnipam 2500 ) onto the surface of Cellulose Nanocrystals (CNCs). Pnipam 2500 grafting in aqueous condition via peptidic coupling was explored to obtain CNC hydrogel with thermo-reversible aggregation and new colloidal properties. A discussion between grafting vs adsorption /presence of the Pnipam 2500 is proposed. A large range of experimental techniques was used to investigate the properties of the CNC decorated with polymer and to confirm the grafting. Elemental analysis, infrared spectroscopy, solid state NMR and conductometric titration of washed CNC-g-Pnipam 2500 demonstrate that at least a part of Pnipam 2500 was covalently bonded with CNC. A thermo-reversible aggregation was observed by Dynamic Light Scattering experiments and thermo-sensitive behavior is observed by rheological experiments. For grafted polymer the viscosity increases from 0.008 to 40 Pa∙s at low shear rate when the LCST is reached, whereas, in the case of polymer adsorption, the viscosity increases only from 0.002 to 0.3 Pa∙s. This thermo-reversible, bio-based and biocompatible system paves the way for the design of injectable hydrogel and biomedical nanocomposite materials., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Chitin nanocrystals (ChNCs) and chitin nanofibers (ChNFs) are nanomaterials with great innovative potential for sustainable applications in academic and industrial fields. The research related to their isolation and production, characterization, and utilization is still new. The aim of this study is to investigate the effects of the production process on the morphology and properties of ChNFs and ChNCs produced from the same source of chitin. ChNCs were prepared by acid hydrolysis of commercial shrimp shell α-chitin, and ChNFs were prepared by mechanical defibrillation using closed loop supermass colloidal grinding. Differences in their shape, size, and crystallinity were observed. ChNFs were observed to have higher aspect ratio, higher viscosity, and better thermal stability than ChNCs. Although the ChNC casting film had a higher degree of transparency, it had lower mechanical properties than ChNF film. In addition, the capacities of each nanomaterial for producing Pickering emulsions were comparatively investigated. ChNFs showed better oil-in-water emulsion stabilization ability than ChNCs at the same concentrations. In vitro cytotoxicity assays using two epithelial-like cell lines and two fibroblast-like cell lines demonstrated that both nanomaterials were non-toxic. Finally, we evaluated the economics of production using process engineering simulation to assess the energy and chemical consumption for each process of production of these nanomaterials., (Copyright © 2018. Published by Elsevier Ltd.)

Nanocomposites are an opportunity to increase the performance of polymer membranes by fine-tuning their morphology. In particular, the understanding of the contribution of the polymer matrix/nanofiller interface to the overall transport properties is key to design membranes with tailored selective and adsorptive properties. In that aim, cellulose nanocrystals (CNC)/polylactide (PLA) nanocomposites were fabricated with chemically designed interfaces, which were ensuring the compatibility between the constituents and impacting the mass transport mechanism. A detailed analysis of the mass transport behaviour of different permeants in CNC/PLA nanocomposites was carried out as a function of their chemical affinity to grafted CNC surfaces. Penetrants (O 2 and cyclohexane), which were found to slightly interact with the constituents of the nanocomposites, provided information on the small tortuosity effect of CNC on diffusive mass transport. The mass transport of water (highly interacting with CNC) and anisole (interacting only with designed CNC surfaces) exhibited non-Fickian, Case II behaviour. The water vapour caused significant swelling of the CNC, which created a preferential pathway for mass transport. CNC surface grafting could attenuate this phenomenon and decrease the water transport rate. Anisole, an aromatic organic vapour, became reversibly trapped at the specifically designed CNC/PLA interface, but without any swelling or creation of an accelerated pathway. This caused the decrease of the overall mass transport rate. The latter finding could open a way to the creation of materials with specifically designed barrier properties by designing nanocomposites interfaces with specific interactions towards permeants., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Alginate is commonly used in the form of hydrogels in biomedical applications. It is known to be highly sensitive to liquid exposure and can degrade or solubilize easily. This study attempts to improve the mechanical and material properties in various humidity conditions and in liquid immersion of thin alginate films with the addition of unmodified and oxidized cellulose nanocrystals (CNCs, CNC-Ts). CNCs and CNC-Ts were added to alginate composites in varying amounts, and the material and mechanical properties were measured in dry, humid, and liquid conditions. It was shown that the properties can be enhanced with the addition of nanocellulose as tested by liquid uptake, and mechanical testing. These results suggest that the addition of TEMPO-oxidized nanocellulose crystals improves the performance and longevity of alginate when exposed to phosphate buffer solution (PBS) compared to deionized water. This improved performance was shown to have a limited effect on the adhesion of mesenchymal stem cells (MSCs) to the surface of the nanocomposites., (Published by Elsevier Ltd.)

From a single plant source, a wide range of mechanically-deconstructed cellulose nanomaterials can be obtained due to the large number of possible combinations of pre-treatments, mechanical disintegration process, and post-treatments. It leads to the existence of a variety of cellulose nanofibrils with different shapes, morphologies, and properties on the market. The resulting material is actually a complex mixture of nanoscale particles, microfibrillated fibers, and residual fibers on the millimeter scale. Defining a "degree of fibrillation" for determining the final cellulose nanofibril quality is a challenging issue. This study proposes a multi-criteria method to obtain the quality index of cellulose nanofibril suspensions under the form of a unique quantitative grade. According to this method, the influence of different parameters such as pulp conditioning, refining, and hemicellulose content on the defibrillation process is highlighted. This method also allows for the benchmarking of different commercial nanocellulose products., (Copyright © 2017. Published by Elsevier Ltd.)

Cellulose nanofibers (CNFs) were recently investigated for the elaboration of new functional food-packaging materials. Their nanoporous network was especially of interest for controlling the release of active species. Qualitative release studies were conducted, but quantification of the diffusion phenomenon observed when the active species are released from and through CNF coating has not yet been studied. Therefore, this work aims to model CNF-coated paper substrates as controlled release system for food-packaging using release data obtained for two model molecules, namely caffeine and chlorhexidine digluconate. The applied mathematical model - derived from Fickian diffusion - was validated for caffeine only. When the active species chemically interacts with the release device, another model is required as a non-predominantly diffusion-controlled release was observed. From caffeine modeling data, a theoretical active food-packaging material was designed. The use of CNFs as barrier coating was proved to be the ideal material configuration that best meets specifications., (Copyright © 2016. Published by Elsevier Ltd.)

Surface functionalization of cellulose nanocrystals (CNCs) aims to improve their properties. The main objective of this study was the esterification of the surface of CNCs using nontoxic resin acids, rosin. The structural and morphological modifications of CNC nanorods were characterized by (13)C NMR and Fourier transform infrared spectroscopy, atomic force microscopy, and X-ray diffraction analyses. The properties of functionalized CNCs were evaluated by thermogravimetric analysis and contact-angle measurements. The results indicate that the esterification proceeded from the surface of the CNC. The antimicrobial activities of the modified and neat CNC were investigated; the rosin-grafted CNC exhibited a strong antibacterial activity against Gram-negative bacteria and a modest antibacterial activity against Gram-positive bacteria., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

In the last decade, a new fiber pretreatment has been proposed to make easy cellulose fibrillation into microfibrils. In this context, different surface cationized MFC was prepared by optimizing the experimental parameters for cellulose fibers pretreatment before fibrillation. All MFCs were characterized by conductometric titration to establish degree of substitution, field emission gun scanning electron microscopy (FEG-SEM), atomic force microscopy (AFM) and optical microscopy assessed the effect of pretreatment on the morphology of the ensuing MFCs. Antibacterial activities of neat and cationized MFC samples were investigated against Gram positive bacteria (Bacillus subtilis, Staphylococcus aureus) and Gram negative bacteria (Escherichia coli). The CATMFC sample at DS greater than 0.18 displayed promising results with antibacterial properties without any leaching of quaternary ammonium into the environment. This work proved the potential of cationic MFCs with specific DS for contact active antimicrobial surface applications in active food packaging, medical packaging or in health and cosmetic field., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

A simple method to produce biobased iridescent pigments from cellulose nanocrystal (CNC) films is reported. The process consists of forming nanostructured films from a CNC liquid-crystalline suspension and an appropriate dry grinding. The features of the iridescent pigments are described; they have a flake-like morphology with a thickness of 25 μm. However, because of the presence of sulfate groups, thermal degradation and high redispersion in water occur, which affect the iridescent property of these biobased pigments. To overcome such limitations, two post-treatments are proposed. The sulfate ester groups are removed from the iridescent pigments with vacuum overdrying. The mass loss of iridescent pigment in water is reduced with an increase of the ionic strength in the aqueous medium by NaCl addition. These post-treatments have proven to be efficient and engineered pigments based on CNC films can be used to add anticounterfeiting features to packaging manufactured by classical paper techniques or extrusion., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

In this work, a new use of microfibrillated cellulose (MFC) is highlighted for high-added-value applications. For the first time, a nanoporous network formed by MFC coated on paper is used for a controlled release of molecules. The release study was carried out in water with caffeine as a model molecule. The release process was studied by means of (i) continuous, and (ii) intermittent diffusion experiments (with renewal of the medium every 10 min). The effect of the MFC was first observed for the samples impregnated in the caffeine solution. These samples, coated with MFC (coat weight of about 7 g/m(2)), released the caffeine over a longer period (29 washings compared with 16), even if the continuous diffusions were similar for both samples (without and with MFC coating). The slowest release of caffeine was observed for samples coated with the mixture (MFC+caffeine). Moreover, the caffeine was only fully released 9h after the release from the other samples was completed. This study compared two techniques for the introduction of model molecules in MFC-coated papers. The latter offers a more controlled and gradual release. This new approach creates many opportunities especially in the food-packaging field. A similar study could be carried out with an active species., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The crystallization, mechanical and biodegradation properties of poly(lactic acid)/natural rubber/cellulose nanocrystals (CNC) bionanocomposites were evaluated. Three types of CNC were used in this study, one unmodified (CNC), long alkyl chain grafted CNC (C18-g-CNC) and PLA grafted CNC (PLA-g-CNC). The CNC modifications determined the affinity of the nanocrystals toward the polymers and reflected on the ultimate properties. Interestingly, PLA-g-CNC acted as a nucleating agent for the PLA matrix in the bio-based PLA/NR blend. Good mechanical properties were reported, as the bionanocomposites maintained a high elongation at break for a concentration up to 3 wt.% of cellulose nanocrystals. Moreover, the disintegration study confirmed that the materials completely disintegrated after one month in compost., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

PLA/NR/cellulose nanowhisker composites were prepared using three types of cellulose nanocrystals (CNC), i.e. unmodified CNC obtained from acid hydrolysis of microcrystalline cellulose and two surface modified CNC. The two modification reactions, consisting on the grafting of long alkyl chains and of PLA chains onto the cellulose nanocrystals were carried out in order to facilitate the incorporation of the nanocrystals in the PLA/NR blend. A novel processing method was optimized combining solvent casting and extrusion in order to obtain a homogeneous dispersion of the nanofillers in the blend. The CNC modifications determined their location in the PLA/NR blend and influenced its morphology., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Cellulose nanocrystals have been prepared by acid hydrolysis of Luffa cylindrica fibers. The acid-resistant residue consisted of rod-like nanoparticles with an average length an diameter around 242 and 5.2nm, respectively (aspect ratio around 46). These cellulose nanocrystals have been used as a reinforcing phase for the processing of bio-nanocomposites using polycaprolactone (PCL) as matrix. To promote interfacial filler/matrix interactions the surface of cellulose nanocrystals was chemically modified with n-octadecyl isocyanate (C(18)H(37)NCO). Evidence of the grafting was supported by infrared spectroscopy and elemental analysis. X-ray diffraction analysis was used to confirm the integrity of cellulose nanocrystals after chemical modification. Both unmodified and chemically modified nanocrystals were used to prepare nanocomposites. The thermal properties of these materials were determined from differential scanning calorimetry and their mechanical behavior was evaluated in both the linear and non-linear range., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Interest in microfibrillated cellulose (MFC) has been increasing exponentially. During the last decade, this bio-based nanomaterial was essentially used in nanocomposites for its reinforcement property. Its nano-scale dimensions and its ability to form a strong entangled nanoporous network, however, have encouraged the emergence of new high-value applications. In previous years, its mode of production has completely changed, as many forms of optimization have been developed. New sources, new mechanical processes, and new pre- and post-treatments are currently under development to reduce the high energy consumption and produce new types of MFC materials on an industrial scale. The nanoscale characterization possibilities of different MFC materials are thus increasing intensively. Therefore, it is critical to review such MFC materials and their properties. Moreover, very recent studies have proved the significant barrier properties of MFC. Hence, it is proposed to focus on the barrier properties of MFC used in films, in nanocomposites, or in paper coating., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Starch nanocrystals (SNC) are crystalline square-like platelet about 10nm thick and 50-100nm equivalent diameters. Depending on the botanic origin of starch these platelets show different features. The aim of the present study was (i) to assess the thermal stability of SNC in different processing conditions (i.e., excess water and dry) and (ii) to investigate the potential influence of botanic origin on thermal stability. The thermal properties of five types of starches (waxy maize, normal maize, high amylose maize, potato and wheat) and their corresponding SNC were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). SNC revealed two endothermic transitions. No correlation between melting temperature and botanic origin was found. However, a review of starch thermal properties allowed to postulate for the mechanism involved in SNC thermal transitions. It was also found that SNC can be used in wet processes below 100°C and in dry processes below 150-200°C to avoid melting., (Copyright © 2011 Elsevier Ltd. All rights reserved.)