Search

Wood discoloration was investigated in 721 paper birch (Betula papyrifera Marsh.) trees from 146 sites across the managed forest of Quebec, Canada. Discoloration was present at breast height in 85% of trees, but its impact was limited in terms of tree basal area and volume, with proportions of 6.4% and 3.6%, respectively. These two measures were strongly correlated. Discoloration changed wood appearance but had no effect on microfibril angle and modulus of elasticity. Discolored wood was nevertheless denser, probably due to the accumulation of colored extractives. Predictive models were also developed and applied to 415 711 paper birch trees from 51689 inventory plots across the province to study regional variation. Higher proportions of discolored basal area were obtained in the southwestern areas of the province where the climate is warmer and drier. In these areas, paper birch trees are larger and, likely, support bigger branches which can cause larger columns of discoloration when broken. Lower proportions were found in eastern regions where snowfall is more abundant. Smaller, more flexible branches in trees growing in these areas could explain this result. This study confirms the feasibility of large-scale mapping of wood discoloration in standing trees based on forest inventory and climate data. Key words: paper birch, wood discoloration, wood properties, regional variation, climate. La coloration du bois a ete etudiee chez 721 tiges de bouleau blanc (Betula papyrifera Marsh.) provenant de 146 sites repartis a travers la foret amenagee du Quebec, au Canada. La coloration etait presente chez 85 % des arbres mais son impact etait faible : elle occupait seulement 6,4 % de la surface terriere et 3,6 % du volume des tiges. Ces deux variables etaient etroitement correlees. La coloration a modifie l'apparence du bois mais n'a eu aucun effet sur l'angle des microfibrilles ni sur le module d'elasticite. Le bois colore est neanmoins plus dense, vraisemblablement a cause de l'accumulation de matieres extractibles colorees. Des modeles de prediction ont egalement ete elabores et appliques a 415 711 tiges de bouleau blanc provenant de 51689 parcelles d'inventaire reparties a travers la province pour etudier la variation regionale. De plus grandes proportions de surface terriere de bois colore ont ete obtenues dans les regions du sud-ouest de la province oU le climat est plus chaud et plus sec. Dans ces regions, les tiges de bouleau blanc sont plus grosses et supportent probablement de plus grosses branches qui peuvent causer de plus grandes colonnes de coloration lorsqu'elles cassent. De plus faibles proportions de coloration ont ete trouvees dans les regions de l'est oU les chutes de neige sont plus abondantes. Le fait que les arbres croissant dans ces regions aient des branches plus petites et plus flexibles pourrait expliquer ce resultat. Cette etude confirme que la cartographie de la coloration a grande echelle dans les arbres sur pied est realisable a partir de donnees d'inventaire forestier et du climat. [Traduit par la Redaction] Mots-cles: bouleau blanc, coloration du bois, proprietes du bois, variation regionale, climat., Introduction Paper birch (Betula papyrifera Marsh.) is one of the most abundant hardwood species in Canada with a natural range from eastern to western coast (Safford et al. 1990). In [...]

Although stakeholders' participation in forest management helps overcome problems and conflicts that prevent sustainable solutions, different approaches and nomenclature for similar contents in the literature hinder theoretical progress on the topic. This study organises existing information through a bibliometric analysis of scientific papers from the last 30 years (1991–2021) on sustainable forest management, focusing on the stakeholders' participation. Results demonstrate that stakeholders' participation in sustainable forest management gained relevance from 2017 onwards. Case studies are predominant (66%) and six major trends were identified. The first emphasises a systemic approach to participation. The second updates the community management discussion. The third studies historical problems related to the use of resources, rights, and services. The fourth focuses on regional assessments and studies. The fifth concerns assessment, decision-making, and planning, including issues related to certifications and policies. The sixth discusses innovation related to adaptation, climate change, equity, and resilience. The studies included in this last classification are problem-solving-oriented and seek new forest management. Although important, the role of innovation in stakeholders' participation in sustainable forest management is overlooked, which constitutes an avenue for future research. [ABSTRACT FROM AUTHOR]

Tree detection and canopy area measurement are important and difficult tasks in forest inventory, which are important for understanding forest stand structure. This study utilized remotely piloted aircraft (RPA) aerial photography technology to collect remote sensing images of forests in Xiong County, China, creating a dataset comprising 1200 images of six tree species. Based on this dataset, the paper proposes an optimized model, Att-Mask R-CNN, for canopy detection and segmentation. Att-Mask R-CNN outperforms the original models (Mask R-CNN and MS R-CNN) by achieving 65.29% mean average precision for detection, 80.44% mean intersection over union for segmentation, and 90.67% overall recognition rate for the six tree species. In addition, a pixel statistics method based on segmentation masks is introduced for estimating the vertical projected area of individual tree crowns, and comparisons between the measured and predicted vertical projected area of the crowns of six tree species (100 trees of each class) show an overall goodness-of-fit R2 of 85% and a relative root-mean-square error rRMSE of 12.81%. By using remote sensing images from RPAs and optimizing existing deep learning models, the detection and segmentation of individual tree canopies can be achieved, resulting in a more accurate understanding of forest structure, which provides scientific support for forest management and resource monitoring. [ABSTRACT FROM AUTHOR]

Precommercial thinning could be a valuable tool for climate change adaptation, as it can promote stand diversity while increasing productivity. Softwood and hardwood stands are usually thinned following different methods, and we lack recommendations for application in mixedwood stands. We evaluated the effects of precommercial thinning on the growth and composition of balsam fir (Abies balsameaL.)–birch stands dominated by paper and yellow birch (Betula papyrifera Marsh. and Betula alleghaniensis Britt.), comparing methods and production objectives (systematic release-softwood, systematic release-mixedwood, crop-tree release-mixedwood, and crop-tree release-hardwood) in Québec (Canada). Precommercial thinning increased tree-level and stand-level growth, especially for both birches. Compared to the non-thinned control, thinning increased tree diameter at breast height annual increments by 60%–107%, with similar results among modalities. Thinning changed initial stand composition, but mixedwood production plots composition was similar to that of the control 15 years after treatment. Promoting diversity is often perceived to be made at the expense of wood production. Our results suggest that we can obtain both increased growth and maintain diversity. Precommercial thinning is currently suggested as an adaptation tool that can foster drought resistance. Based on our study, we suggest it could serve another purpose in climate-adapted forest management, that is, maintaining diversity and thus increasing resilience to disturbances. [ABSTRACT FROM AUTHOR]

This paper reviews and discusses the main features of biological invasion by plants and the assisted migration theory referencing a critical common factor—belowground ecology. The risk of a plant becoming invasive and the potential failure of assisted migration programs depend on the presence or absence of soil microorganisms that regulate key ecosystem processes and mitigate adverse environmental conditions. This biotic interaction should be considered in the selection of sites for afforestation programs since it is as important as temperature and precipitation regarding conservation decisions, and assisted migration practices in response to climate change. Fungal species should be determined and included in climate change mitigation programs to avoid disease outbreaks and ensure the presence of beneficial mutualistic species in sites selected for assisted migration. Plants considered for assisted migration should pose a low risk of becoming invasive for having establishment difficulties per se. However, the real threat is that they may displace other species, introduce pathogens, or trigger disease outbreaks in introduction sites that nullify assisted migration efforts. [ABSTRACT FROM AUTHOR]

There is an increasing interest in mixed conifer-broadleaf stands as a way to increase the diversity and productivity of managed forests. This study examined the impacts of varying densities of planted broadleaf trees on conifer performance, total stand productivity, and understory plant cover 20 years after stand establishment. The study took place in the Malcolm Knapp Research Forest in Maple Ridge, British Columbia. It used a randomized complete block design to compare treatments containing low, moderate, or high broadleaf densities added to a constant conifer density. Each block contained a conifer-only plot as a control. Conifers were composed of equal amounts of western hemlock, western redcedar, and Douglas-fir. Broadleaves were composed of either red alder or paper birch. We found that conifer volume was significantly lower in most broadleaf treatments relative to the control, due to lower hemlock and redcedar volumes. Douglas-fir, on the other hand, had a higher volume—albeit not significant—in the broadleaf treatments. There were no significant differences in total stand volume between any of the treatments and the control. Shrub cover was significantly higher in the low and high alder treatments relative to the control, but there were no differences in shrub cover between birch treatments and the control. The results suggest that low alder density provides a good balance of conifer yield and understory development. [ABSTRACT FROM AUTHOR]

Forest biomass harvest has the potential to provide feedstocks for energy production to offset fossil fuel consumption. However, concerns have been raised regarding the ecological sustainability of removing additional biomass from forests, in particular the impacts on biodiversity. In this paper, we used a suite of ground-dwelling arthropod taxa (ground beetles, spiders, and rove beetles) to measure community compositional changes along a gradient of biomass removal treatments 7 years postharvest, and compared against reference. Based on multivariate regression trees, changes in species composition reflected the intensity gradient of the biomass removal treatments or stand attributes associated with the level of forest floor disturbance across all arthropod groups. For each arthropod group, changes in composition were defined primarily by reductions or loss of abundant forest associated species and increases in the number and abundance of species associated with more xeric conditions and increased disturbance intensity. There were no differences between full-tree and tree-length treatments. Overall, results indicated a strong arthropod response to the removal of overstory, forest floor disturbance, and reductions in understory cover mostly resulting from the glyphosate applications. Arthropod recovery would benefit from overstory retention, reduction in forest floor disturbance, and judicious use of glyphosate. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Planted forests are in the utilisation phase in Japan, contributing to the increased use of timber and the realisation of carbon neutrality. We simulated and compared the carbon emission reduction effects of three forest management scenarios, including a no final cutting scenario at two geographical scales, in the context of a privately owned Cryptomeria japonica planted forest in Tsuruoka City, Yamagata Prefecture, Japan. We adopted two substitution approaches: the status quo approach and the dynamic approach in line with Japan's nationally determined contribution. We used hypothetical stands over three rotation periods of 150 years at the stand level, and a harvest schedule of 120 years at the regional level. The harvesting scenarios based on the status quo substitution approach reduced carbon emissions more than the no final cutting scenario for current wood usage at the study site, although those based on the dynamic substitution approach reduced carbon emissions as much as the no final cutting scenario during the first 30 years. Sustainable timber production from forests may reduce carbon emissions as much as unharvested forests until 2050, indicating that the substitution effects of harvested wood products could have a significant impact on the climate change mitigation effect arising from timber. [ABSTRACT FROM AUTHOR]

Forest products trade has a critical role to play in both global economic development and environmental protection. Based on the trade data of global forest products, raw forest products, and processed forest products from 2000 to 2020, this paper constructed a trade network and analyzed its pattern by using indicators such as density, average distance, out-strength, and in-strength. The results show that from 2000 to 2020, the global trade network of forest products has been increasingly connected. Compared with the trade of raw material forest products, the trade network of processed forest products is more closely connected and its transport efficiency is higher. Countries with high GDP such as USA, China, and Germany are leading trading countries in forest products. Countries with abundant forest resources are the major exporters of raw forest products, while labor- and capital-abundant countries are major exporters of processed forest products. Countries with abundant labor and capital and high GDP are the main importers of raw forest products. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Increased emphasis on forest complexity, resilience, and biodiversity has renewed interest in northern hardwood forests. In parallel, there is concern of impacts of traditional, timber-oriented regeneration methods on successional trajectories and tree communities. To ensure compatibility of emerging goals with site biological capacity, assessment of common silvicultural methods across forest conditions is imperative. This work utilizes a long-term dataset of 407 sampling plots from the Bartlett Experimental Forest in New Hampshire, USA, over 70 years. Topographic and meteorological variables were utilized to test the effects of site conditions and silviculture on tree species diversity and composition. Results show a decline in diversity over time that reflects a shift toward dominance of late successional species, which vary with site-specific conditions. The effect of silviculture was not detectable, and differences in tree communities were attributed to pre-existing conditions of site variables prior to installation of experimental treatments. Tree diversity and composition for both 1932 and 2003 measurements were correlated with solar insolation, local wind speed, and hydrological catchment area. The collective findings highlight the long-term stability of species under past silvicultural regimes, that some areas are more facilitative/limiting to goals of enhancing tree biodiversity and emerging technologies can capture species–site interactions in northern hardwoods. [ABSTRACT FROM AUTHOR]

The article discusses the 2022 North American Forest Ecology Workshop (NAFEW) with the theme "Turning Ecological Answers into Forest Management Actions," highlighting the importance of forest science in sustainable forest management practices and how the research community contributes to evidence-based policies.

Intraregional trade of forest products is a critical component of regional and subregional timber markets in terms of supply chain planning and locating forest product manufacturing facilities. Based on a gravity trade model, we evaluated the various factors driving the interstate flows of softwood sawlog and roundwood pulpwood in the 13 southern US states: AL, AR, FL, GA, KY, LA, MS, NC, OK, SC, TN, TX, and VA. Biennial state-level panel data from 2011 to 2019 in 13 southern states were employed to estimate empirical sawlog and pulpwood trade models. The results suggest that state gross domestic product (GDP) of importing states, exporter and importer production, importer consumption, the distance between the trading partners, and the electronic logging device mandate are influential factors of softwood sawlog trade between the states. Similarly, state GDP, exporter pulpwood production, importer consumption, the distance between the trading partners, delivered timber prices, and pellet mill capacity in each state are found to be significant determinants of softwood pulpwood trade between the partners across the state borderlines. The findings provide forest managers and policy makers with additional insights on the growing bilateral timber trade dynamics in regional and subregional markets in the southern United States. [ABSTRACT FROM AUTHOR]

North American conifers exhibit three radial specific gravity (SG) patterns (Type 1, 2, and 3), which balance hydraulic and mechanical requirements. Type 1 and 2 patterns (Pinaceae) have low SG and high microfibril angle (MFA) corewood ensuring compliance, whereas in outerwood high SG/low MFA provide stiffness and strength resisting bending. Hydraulically, corewood, especially in Type 2 species, is resistant to embolism, whereas outerwood has higher specific conductivity. Cupressaceae (Type 3) have hydraulically very efficient, low SG outerwood, facilitating rapid growth. Corewood is flexible, whereas outerwood is mechanically weak and compensated for by more conical stems and durable heartwood (which prevents Brazier buckling). Radially earlywood (EW) decreases, and latewood (LW) increases for all types, whereas %latewood (%LW) increases (Type 1), decreases, then increases (Type 2) and decreases (Type 3). Ring SG increases when increasing LW SG and %LW are sufficient to counteract decreasing EW SG. Shade tolerance, crown recession, hormone gradients, and environmental variation affect patterns. Auxin concentration decreases with increasing distance from juvenile foliage slowing cell division, concomitantly gibberellin concentration (lignification) and carbohydrates (cell wall thickening) increase, producing higher %LW. Across a species range regions receiving relatively high summer rainfall have trees with higher %LW (by ring). [ABSTRACT FROM AUTHOR]

Spatially explicit global estimates of forest carbon storage are typically coarsely scaled. While useful, these estimates do not account for the variability and distribution of carbon at management scales. We asked how climate, topography, and disturbance regimes interact across and within geopolitical boundaries to influence tree biomass carbon, using the perhumid region of the Pacific Coastal Temperate Rainforest, an infrequently disturbed carbon dense landscape, as a test case. We leveraged permanent sample plots in southeast Alaska and coastal British Columbia and used multiple quantile regression forests and generalized linear models to estimate tree biomass carbon stocks and the effects of topography, climate, and disturbance regimes. We estimate tree biomass carbon stocks are either 211 (SD = 163) Mg C ha−1 or 218 (SD = 169) Mg C ha−1. Natural disturbance regimes had no correlation with tree biomass but logging decreased tree biomass carbon and the effect diminished with increasing time since logging. Despite accounting for 0.3% of global forest area, this forest stores between 0.63% and 1.07% of global aboveground forest carbon as aboveground live tree biomass. The disparate impact of logging and natural disturbance regimes on tree biomass carbon suggests a mismatch between current forest management and disturbance history. [ABSTRACT FROM AUTHOR]

We studied how management intensity and climate severity affect volume growth, timber yield, carbon stocks, and the amount of deadwood in Scots pine (Pinus sylvestris (L.)), Norway spruce (Picea abies (L.) Karst.), and silver birch (Betula pendula Roth.) dominated stands in the Republic of Karelia and Arkhangelsk region of northwest Russia. Using the forest ecosystem model (SIMA) under different climates (current and representative concentration pathway scenarios, RCP4.5 and RCP8.5), no-thinning, low, medium, and high intensity thinning rotational forestry regimes were simulated. Under RCPs, the volume growth and timber yield (5%–53%), carbon stocks (1%–22%), and deadwood amounts (11%–75%) increased for all Scots pine and silver birch stands. The use of low intensity management increased volume growth and carbon stocks (3%–16%) and deadwood amount (up to 60%) under RCPs, but not timber yield (±3%) in these stands. For Norway spruce stands, the volume growth (5%–26%), timber yield (23%–75%), and carbon stocks (5%–15%) decreased under RCP8.5, but deadwood amount increased (up to 142%). Intensive management increased volume growth (4%–19%), timber yield (4%–63%), carbon stocks (up to 14%), and deadwood amounts (up to 49%). Our results highlight that effects of climate severity and management intensity are site and species-specific for Eurasian's boreal forests. [ABSTRACT FROM AUTHOR]

Measuring the chemical traits of leaf litter is important for understanding plants' influence on nutrient cycles, including through nutrient resorption and litter decomposition, but conventional leaf trait measurements are often destructive and labor-intensive. Here, we develop and evaluate the performance of partial least-squares regression models that use reflectance spectra of intact or ground leaves to estimate leaf litter traits, including carbon and nitrogen concentration, carbon fractions, and leaf mass per area (LMA). Our analyses included more than 300 samples of senesced foliage from 11 species of temperate trees, including both needleleaf and broadleaf species. Across all samples, we could predict each trait with moderate-to-high accuracy from both intact-leaf litter spectra (validation R2 = 0.543–0.941; %root mean squared error (RMSE) = 7.49–18.5) and ground-leaf litter spectra (validation R2 = 0.491–0.946; %RMSE = 7.00–19.5). Notably, intact-leaf spectra yielded better predictions of LMA. Our results support the feasibility of building models to estimate multiple chemical traits from leaf litter of a range of species. In particular, intact-leaf spectral models allow non-destructive trait estimation in a matter of seconds, which could enable researchers to measure the same leaves over time in studies of nutrient resorption. [ABSTRACT FROM AUTHOR]

Western redcedar has high economic value and has been traditionally used for cultural purposes by Indigenous communities. Second-growth redcedar is potentially growing faster due to lower planting densities, fertilization, and tree breeding. Little quantitative information is available about the impact of management practices on wood quality, particularly heartwood extractives. This study evaluated the effects of growth rate and site on heartwood extractives at two locations aged 70–90 years in British Columbia, Canada. A three-parameter sigmoid model was fit to the data using nonlinear mixed effects to analyze the relationship between heartwood extractives relative to cambial age, growth rate, and sampling site. The southern site had significantly higher cumulative extractive concentrations, while all extractive concentrations increased faster. This study shows that smaller trees will reach their peak concentrations earlier than larger trees. Results show that faster growth through active management of western redcedar may lead to increased and more uniformly distributed content of heartwood extractives. [ABSTRACT FROM AUTHOR]

Models of forest regeneration dynamics have been less widely applied in forest management than those representing growth and mortality in later stages of stand development, in spite of the critical role of regeneration in maintaining forest ecosystems. This omission is demonstrated by a review of pertinent literature and examined in the context of reforestation in the province of Alberta. Regeneration assessments in Alberta are undertaken before the regeneration phase of stand development is complete. As a result, existing growth and yield models, used to predict whether regeneration performance will meet management objectives, do not adequately represent juvenile mortality, ingress of natural regeneration, stand density, and the responses of ingress and mortality to reforestation treatments. A long-term experiment monitoring regeneration of lodgepole pine stands following harvest has over the last 20 years attempted to address some of the resulting challenges. Opportunities and needs for regeneration modelling include extension to other boreal species and ecotypes, incorporation of climatic variables, and innovations in data collection and analytical techniques. Steps are recommended for expediting the required research. [ABSTRACT FROM AUTHOR]

Our model for optimizing stand-level wood production and carbon sinks includes individual-tree models for forest growth, an advanced model for soil carbon, detailed wood production economy, and an intertemporal objective for the value of wood production and carbon sinks/emissions. Carbon stocks include aboveground biomass and carbon in forest soil and in wood products. Optimization of the management regime, rotations and thinning timing, and type and intensity are carried out by reinforcement learning. Including the social price of carbon causes a regime switch from continuous cover forestry to clear-cuts, postponed lighter thinning, and a longer rotation, and with a high carbon price, to solutions with pure clear-cuts or solutions utilizing stands as pure carbon stocks. Carbon price has profound effects on stand values, and the bare land value may well exceed the value before a clear-cut. The total average carbon stock is maximized with harvest and a long rotation instead of "no harvesting". Bioenergy, carbon capture, and storage (BECCS) always increases the value of wood production but not necessarily the value of carbon sinks. With BECCS, increasing carbon stocks in trees and forest soil remains optimal. [ABSTRACT FROM AUTHOR]

To facilitate the movement and processing of timber in some regions of the Pacific Northwest, logs are tied together to form large rectangular rafts (often called "booms") which are transported and stored in aquatic environments. In the lower Fraser River, British Columbia, some reaches have >50% of shoreline with adjacent log booms, yet our understanding of the effects of log booms on habitats and biota is very limited. We compared sites that have never had log booms to nearby ones with active boom storage occurring to examine differences in environmental characteristics. In contrast to reference sites, nearly all active sites had compacted sediments and little vegetation coverage, likely caused by logs "grounding" onto benthic environments due to tidally influenced water level changes. Total benthic invertebrate abundance was higher at reference sites which had relatively more Amphipoda and Trichoperta, but fewer Haplotaxida, compared to active sites whose compacted and more detrital-laden sediments should favour haplotaxids. Water quality variables generally did not differ between reference and active sites. Grounding of log booms and contact with the below substrate is in contradiction of best management practices and has clear effects on the physical habitat and biota of the area underneath booming sites. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

European aspen is a keystone species in boreal forests, which support numerous ecologically important and endangered species. As detection of those species by remote sensing is impossible, we instead investigated the detection of large aspen trees using airborne laser scanning and aerial image data. However, this is a challenge due to their low quantity and scattered occurrence. The performance was assessed with representative and unrepresentative (where aspens were over-represented) samples of the population. First, we detected individual trees and then the random forest (RF) classifier was used to identify large aspens. The RF classification was implemented with and without synthetic minority oversampling technique (SMOTE) to balance the training data due to the rarity of large aspens. At the tree-level, the best F1-score (0.44) was obtained when the unrepresentative plot data were used with SMOTE. However, the F1-score decreased to 0.21 when the representative data were used. The best plot-level (plots with at least one aspen tree) F1-score with the representative plot data was 0.41. We conclude that although data augmentation may improve the result, it is difficult to detect large aspen trees in genuine populations. [ABSTRACT FROM AUTHOR]

We compared three methods for estimating current-year spruce budworm (Choristoneura fumiferana (Clem.)) defoliation from 2014 to 2021 using a network of 99 permanent sample plots in central Gaspé Peninsula, Québec. Percent current-year defoliation was measured by assessing shoots from mid-crown branches, ocular ratings of all individual trees using binoculars, and provincial government aerial surveys. Ocular survey defoliation differed from branch sample defoliation in 5–6 out of 7 years, consistently underestimating defoliation, across the full range of defoliation severity observed. Nested mixed-effect models for fir–spruce combined, balsam fir, white spruce, and black spruce ocular survey defoliation bias resulted in marginal R2 of 0.40, 0.47, 0.82, and 0.86, respectively. Current defoliation severity and its interaction with previous year defoliation and weather conditions significantly affected ocular survey bias. Correspondence of aerial survey estimates and mean plot defoliation occurred in only 43% of all plot-years and ranged from 14%–58% in individual years. Differences between aerial survey defoliation and plot values mainly resulted from assigning an adjacent class (e.g., light <30% assigned as moderate 31%–70% defoliation) or misplaced defoliation polygon boundaries, suggesting that assignment of aerial survey defoliation to plots or specific ground areas needs ground truth sampling. [ABSTRACT FROM AUTHOR]

Forest fires and logging drive the structure of boreal forest landscapes. According to recent studies, stand origin is a key driver of the variation in wood properties in black spruce (Picea mariana (Mill.) BSP.), although the underlying mechanisms remain to be elucidated. By comparing post-cut, post-fire and old-growth forests, this study aimed to better distinguish the effects of stand structure from those of the seed or layer origin of the trees on wood properties. We conducted comparative analyses based on ecological characteristics of the sites and static bending tests of small, defect-free wood specimens. Black spruce stands with a regular structure established after logging or fire exhibited higher stiffness at a given cambial age than old-growth forests with irregular structures, as well as lower wood density in the first 40 rings near the pith. However, the bending strength was comparable in all three types of forests studied. Differences in wood stiffness among stand types appeared to be driven more by stand structure than by the seed or layer origin of the stems. [ABSTRACT FROM AUTHOR]

Accurate and fine-scale forest data are essential to improve natural resource management, particularly in the face of climate change. Here, we present SCANFI, the Spatialized CAnadian National Forest Inventory, which provides coherent, 30 m resolution 2020 wall-to-wall maps of forest attributes (land cover type, canopy height, crown closure, aboveground tree biomass, and main species composition). These maps were developed using the NFI photo-plot dataset, a systematic regular sample grid of photo-interpreted high-resolution imagery covering all of Canada's non-arctic landmass. SCANFI was produced using temporally harmonized summer and winter Landsat spectral imagery along with hundreds of tile-level regional models based on a multiresponse k-nearest neighbours and random forest imputation method. This tile-level approach revealed the importance of radiometric variables in predicting vegetation attributes, namely winter radiometry, as the large-scale climate gradients were controlled at the tile-level. SCANFI was validated with rigorous cross-validation analyses, which revealed robust model performance for structural attributes (biomass R2 = 0.76; crown closure R2 = 0.82; height R2 = 0.78) and tree species cover (e.g., Douglas fir R2 = 0.60). SCANFI attributes were also validated with several independent external products, ranging from ground plot-based tree species cover (e.g., black spruce R2 = 0.53) to satellite LiDAR height data products (e.g., crown closure R2 = 0.71). SCANFI total aboveground biomass trends also followed those published by other studies. The methodology presented herein can be used to map time series of these attributes, identify the original training points used to make any given prediction, as well as map additional variables associated with the NFI photo-plots that are challenging to map using traditional remote sensing approaches. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The article presents the emerging forest bioeconomy as an integrated, multi-product industrial ecosystem, where the traditional pulp mills allocate the use of side streams to independent biochemical companies manufacturing bioproducts in the vicinity of the pulp mills. Topics include the biochemical benefit from the proximity by receiving wood-based side streams at lower costs, and at the same time, and the pulp mills benefit from having a new source of revenue from selling side streams.

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Eucalyptus species are cultivated for various purposes around the world, mainly because they adapt well and grow quickly. These productive matrices of planted forests are common in Brazil, added to which, areas of native vegetation are requirements of environmental legislation. Although eucalyptus plantations are widely distributed in Brazil, little is known about the soil seed bank (SSB) in the eucalyptus productive matrix (EPM). We aim to understand how the EPM made up of eucalyptus plantations and native forest remnants affect the SSB in the Brazilian Pampa. Samples of the SSB of EPM were collected and monitored for 6 months in a shade house. We evaluated seedling emergence, richness, composition, ecological characteristics of the species, diversity, and floristic similarity. We recorded a high rate of seedling emergence, species richness, and different life forms and native species in all EPM treatments; however, the similarity between native remnants and eucalyptus plantations was low. The size and level of conservation of native remnants and the position and management of eucalyptus sites in the EPM influenced the diversity and composition of species. Eucalyptus plantations contain SSBs with potential for natural regeneration when they are in a landscape that maintains conserved native forest remnants. These results expand the knowledge of the SSB in EPM and can support actions in ecological restoration projects. [ABSTRACT FROM AUTHOR]

Forest plantations play an increasingly important role in meeting global demand for wood. They usually have higher yield than naturally regenerated forests. Thus, plantations can support economically viable wood production, enable forest conservation elsewere, help mitigate climate change by contributing to carbon sequestration and increase forest resilience and resistance to biotic and abiotic stressors. If yield of plantations is not as high as anticipated, then their use could generate important sustainability issues. There are still major gaps in our understanding of the factors that influence yield, even with respect to black spruce, white spruce, and jack pine, three of the most commonly planted tree species in northeastern North America. Our objective was to evaluate the yield of forest plantations of these species over a 416 000 km2 region that was representative of northeastern North American forests. Contrary to our prediction, realized yield of operational plantations was consistently lower than anticipated. Site index and competition both played a significant role in determining the yield of plantations. In the context of uncertain realized yield of operational plantations, we emphasize the necessity of relying on adaptive management to determine harvest levels that are compatible with sustainable management objectives. [ABSTRACT FROM AUTHOR]

Mixed plantations are garnering increased attention due to their potential to provide a broader array of benefits compared to monocultures. Although numerous studies have indicated promising complementarity between black spruce (Picea mariana) and tamarack (Larix laricina), few have delved into individual tree growth interactions to thoroughly assess early growth complementarity. We sampled 119 planted black spruce and their immediate environment to quantify and qualify any differences between two conditions in young plantations: mixed tamarack ("mixtures") and black spruce monocultures ("monocultures") within young plantations. We investigated the effect of neighbouring under four perspectives: tree competition, microenvironment, foliar nutrients, and soil nutrients. Our results showed increased values for black spruce foliar nitrogen total concentration, soil pH, and canopy closure in mixtures compared to monocultures. Furthermore, black spruce stem volume was increased by 38.1% in mixture compared to monoculture. Black spruce stem volume was negatively affected (86% decrease) by the combined effect of shrubs and non-crop trees under high competition pressure, despite the plantation being mechanically released in 2017. Collectively, our results suggest that black spruce growing in mixtures holds a greater growth potential than black spruce in monocultures. [ABSTRACT FROM AUTHOR]

Growth and yield systems are essential tools for enhancing forest management decision-making. This study systematically evaluated three stand-level models and two data types for predicting stand survival and basal area of Chinese fir (Cunning lanceolate (Lamb.) Hook.) plantations in southern China. The first model links survival and diameter through the self-thinning concept. The second model incorporates stand diameter, the previous year's diameter, and stand survival, while the third model treats stand survival and diameter as mutually independent functions of only stand age. Model 2 was the best performer for short-term prediction (2–4 years), whereas Model 3 excelled in longer projection periods (6–10 years). Despite the independent predictions of stand survival and diameter in Model 3, it closely tracked observed self-thinning trajectories in long-term predictions. Tree-level model growth derived from Models 2 and 3 performed optimally for short-term and long-term tree-level predictions, respectively. While limited to four experimental sites, this research contributes theoretical groundwork to growth and yield modeling for Chinese fir plantations. [ABSTRACT FROM AUTHOR]

The Atlantic Forest fragments have suffered from the impacts of climate change, resulting in the increased production of coarse woody debris (CWD), which needs to be evaluated in space and time to generate accurate estimates of carbon accumulation. Thus, the goals of this study were (i) to quantify the CWD volume, necromass, carbon stock, and annual increment of carbon (AIcarb) over a period of 4 years; and (ii) to select the optimal combination of climatic, topographic, edaphic, and intrinsic forest variables to accurately predict AIcarb using machine learning and multivariate analysis. The CWD volume, necromass, and carbon stock increased between 2017 and 2020. The AIcarb was 1.09 MgC ha−1 year−1 (2017–2018), 1.24 MgC ha−1 year−1 (2018–2019), and 2.31 MgC ha−1 year−1 (2019–2020). Statistical analysis indicated that climate variables had greater weight in the CWD carbon increment in the 2018–2019 and 2019–2020 periods, while edaphic, topographical, and intrinsic forest variables were more important for the 2017–2018 period. Our findings showed that the carbon increase in CWD was linked to temporal and spatial variables within forests. These results demonstrate the importance of this parameter in the carbon cycle of forest ecosystems and highlight that there should be greater international research efforts to quantify this carbon pool. [ABSTRACT FROM AUTHOR]

We address the concerns that managed forest plantations may cause reductions of diversity of understory vegetation. We performed inventories of two mature ponderosa pine plantations in which multiple treatments were applied during plantation establishment. At stand age 35, we measured tree heights and diameters, understory plant cover and diversity, soil nutrients and chemical properties, and soil microbial biomass and diversity with phospholipid fatty acid. We found a significant, positive effect from both herbicide (H) and fertilizer (F) applications on subsequent overstory tree growth and development (P < 0.05); insecticide (I) effect was minimal. We observed negative effects on understory plant diversity decades later when herbicide was applied during stand establishment. However, lower plant diversity and ground cover appeared to have been caused primarily from overstory canopy closure, supported by the increased understory cover and diversity observed in the HI and HFI plots that had been thinned at age 12. Similarly, while fertilizer increased tree growth at both sites, it only negatively affected understory plants at the higher quality site. We did not find significant influence of treatment effects on soil nutrients and microbial communities. Therefore, to mitigate the potential loss of understory biodiversity in plantations, foresters can manage overstory trees with traditional pre-commercial thinning techniques and early tending. [ABSTRACT FROM AUTHOR]

Understory small trees and shrubs play a crucial role in the biogeochemical cycles in forest ecosystems. However, their biomass in northeastern China is still uncertain and has been heavily disregarded due to the limited number of available allometric equations. For this study, 782 plants from 33 species obtained by the destructive method were used to develop species-specific and generalized aboveground allometric biomass equations based on collar diameter (D) and height (H) using weighted nonlinear seemingly unrelated regression. Each biomass component was shown to be well predicted by D alone, with R2 adj. values mostly greater than 0.80. The majority of species performed better in the models for wood and aboveground biomass when H was included as D2H. Furthermore, generalized equations for the two components showed a comparatively large coefficient of variation but comparable Bias to species-specific equations, especially for small trees. It is recommended to estimate biomass using generalized equations for mixed species only when species-specific equations are unavailable at a given site. However, in the event when precision is not the primary concern, generalized equations are also suggested. The developed equations will help to improve the accuracy of biomass assessment of understory woody plants in northeastern China forest ecosystems. [ABSTRACT FROM AUTHOR]