Search

Wood poles are widely used to support overhead distribution and transmission power lines in North America and the world. These poles are vulnerable to internal deterioration due to extreme weather conditions, requiring a large number of poles to be inspected every year. This paper presents a comparative study of four stress wave-based nondestructive testing (NDT) methods commonly used for condition assessment of wood poles. These include the traditional approaches of sounding, sonic pulse velocity, and ultrasonic pulse velocity tests; and a new approach that considers the orthotropic characteristics of wood, uncertainties in the elastic properties, ultrasonic wave velocity and attenuation. Two poles with an internal hole of 4% of the cross-section are evaluated and compared by each method. Ultrasonic measurements of wave velocity and attenuation considering orthotropic characteristics of wood and uncertainties in the elastic properties provide a reliable wave-based NDT method for the detection of early decay in wood poles.

Steel–concrete composite shear wall offers a favourable lateral strength and deformation ductility for seismic applications while significantly shortening the project schedule through eliminating the use of formworks and taking advantage of modular construction methodology. This paper presents a fibre-based modelling technique for simulation of the cyclic nonlinear response of composite walls by taking advantage of existing reinforced concrete and steel plate shear wall models. The improved modelling technique for cyclic analysis of composite walls that benefits from the macro models available for steel and concrete shear walls is introduced. The model is validated using experimental test data from 20 wall specimens. A sensitivity analysis is performed to examine the influence of various geometrical and material properties using the proposed modelling technique. A step-by-step modelling recommendation is finally proposed. The results show that the proposed modelling technique can efficiently be used to reproduce the nonlinear cyclic response of composite walls.

Steel multi-tiered concentrically braced frames (MT-CBFs) represent a bracing configuration where two or more concentric bracing panels are stacked between the ground and roof levels in tall single-storey buildings. A large proportion of MT-CBFs in Canada are located in low-to-moderate seismic regions (seismic category 0–3) where limited ductility CBFs are often preferred in design. Nevertheless, brace tensile yielding may not occur in all tiers of such frames. Additionally, the analysis and design procedure adopted by the 2019 Canadian steel design standard (CSA S16-19) can become tedious in tall frames with multiple panels. In this paper, the seismic behaviour of limited ductility MT-CBFs in moderate seismic regions of Canada is examined to propose a simplified design method. A set of 16 prototype MT-CBFs is designed in accordance with CSA S16-19, excluding the design requirements prescribed for MT-CBF columns. Nonlinear dynamic analyses are then performed to examine their seismic response. Finally, an efficient design method is proposed in the framework of CSA S16-19.

Based on the decomposition of the deflection into bending, panel shear, nail slip, and base rotation terms, the nonlinear four-term equation specified by the Canadian wood design code provides an estimate of the total lateral deflection of light-frame wood shear walls. This paper reports the creation of a numerical procedure for separating the responses for each term using a detailed nonlinear finite element modeling (FEM) that simulates individual components of shear walls. Since sheathing panel stiffness is not considered in computations of the bending term, the study reveals that bending deformation results calculated using the equation are more conservative than the FEM results. The nail slip term does not reflect the real nail base connection properties. A new equilibrium equation for determining the lateral deflection due to base rotation is presented. The equation is generally conservative because of the omission of some practical considerations.