Search

Over 50 years ago, a marine estuary was converted to a wastewater stabilization basin for treatment of primarily pulp and paper effluent. As a result, the basin was immediately converted to a 'freshwater' environment and subsequently accumulated a thin layer of black, organic-rich sediment containing varying amounts of dioxins and furans, metals, polycyclic aromatic hydrocarbons, and petroleum hydrocarbons. Previous studies on the site have shown that the majority of this contamination in the basin appears to have been contained within this black sediment layer and not migrated to any significant extent into the original underlying marine sediments. The purpose of this study is to examine sediment porewater chemistry changes that have occurred over 51 years of operation of the stabilization basin with the intent of better understanding why contamination has been minimal into the underlying natural marine sediments. Field and laboratory testing is presented to characterize the physical, chemical, and mineralogical sediments in the basin. Porewater chemistry profiles obtained from this work are then used in combination with a one-dimensional contaminant transport model to examine the role of diffusion, sorption, and upward groundwater flux in the porewater profiles found for the sediments. Key words: contaminant migration, diffusion, sorption, barrier, pulp and paper Il y a plus de 50 ans, un estuaire marin a ete converti en bassin de stabilisation des eaux usees pour le traitement d'effluents principalement issus du secteur de la pate a papier. En consequence, le bassin a ete immediatement converti en un environnement << d'eau douce >> et a ensuite accumule une fine couche de sediments noirs, riches en matieres organiques, contenant des quantites variables de dioxines et de furanes, de metaux, d'hydrocarbures aromatiques polycycliques et d'hydrocarbures petroliers. Des etudes anterieures sur le site ont montre que la majorite de cette contamination dans le bassin semble avoir ete contenue dans cette couche de sediments noirs et n'a pas migre de maniere significative dans les sediments marins sousjacents originaux. Le but de cette etude est d'examiner les changements de la chimie de l'eau interstitielle des sediments qui se sont produits au cours des 51 annees d'exploitation du bassin de stabilisation dans l'intention de mieux comprendre pourquoi la contamination a ete minimale dans les sediments marins naturels sous-jacents. Des essais sur le terrain et en laboratoire sont presentes pour caracteriser les sediments physiques, chimiques et mineralogiques du bassin. Les profils chimiques des eaux interstitielles obtenus a partir de ce travail sont ensuite utilises en combinaison avec un modele unidimensionnel de transport des contaminants pour examiner le role de la diffusion, de la sorption et du flux ascendant des eaux souterraines dans les profils des eaux interstitielles trouves pour les sediments. [Traduit par la Redaction] Mots-cles : migration des contaminants, diffusion, sorption, barriere, pate et papier, 1. Introduction Boat Harbour (BH) is the stabilization basin, which until 2020, comprised part of a wastewater treatment facility located near Pictou, Nova Scotia, Canada. A tidal estuary until 1967, [...]

R.M. QUIGLEY AWARDThe R.M. Quigley Award is given out each year to the best paper published in Canadian Geotechnical Journal (CGJ) in the previous year. Bob Quigley was one of [...]

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

R.M. QUIGLEY AWARD The R.M. Quigley Award is given out each year to the best paper published in Canadian Geotechnical Journal (CGJ) in the previous year. Bob Quigley was one [...]

R.M. QUIGLEY AWARD The R.M. Quigley Award is given out each year to the best paper published in Canadian Geotechnical Journal (CGJ) in the previous year. Bob Quigley was one [...]

R.M. QUIGLEY AWARD The R.M. Quigley Award is given out each year to the best paper published in Canadian Geotechnical Journal (CGJ) in the previous year. Bob Quigley was one [...]

R.M. QUIGLEY AWARD The R.M. Quigley Award is given out each year to the best paper published in Canadian Geotechnical Journal (CGJ) in the previous year. Bob Quigley was one [...]

Our Italian colleagues have taken a valuable initiative in selecting 20 of Professor Hutchinson's papers for facsimile reproduction in an attractive volume. The papers are supplemented by a two page [...]

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Stabilizing piles have been widely used as an effective measure to reinforce slopes. In this paper, a hierarchical response surface method is presented to evaluate the reliability of a pile-slope system efficiently. The suggested method can be used to identify the minimum reliability indexes of different types of failure modes. It can also be used to identify the representative failure modes governing the failure probability of the pile-slope system. This study found that the most critical sliding surface of an unreinforced slope and a reinforced slope is different. It may be nonconservative to design a pile-slope system according to the representative sliding surface of the slope without reinforcements. Even if many failure modes may exist, the reliability index of the pile-slope system is often controlled by several representative failure modes. For the slope examined in this paper, the reliability index of the pile-slope system is controlled by the reliability index of first representative failure mode. The first representative failure mode may vary with the reinforcement ratio, pile length, pile spacing, and location of the piles. The approach presented in this study provides a practical means to quantify the effect of such factors on the design of a pile-slope system. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The paper describes load and resistance factor design (LRFD) calibration for the resistance factor used in the Stiffness Method internal stability soil failure limit state for geogrid mechanically stabilized earth (MSE) walls. The Stiffness Method was recently adopted in the current American Association of State Highway and Transportation Officials LRFD Bridge Design Specifications in the US, and will appear in the next edition of the Canadian Highway Bridge Design Code. The paper describes the details of the calibration of the soil failure limit state which is unique to the Stiffness Method. Calibration outcomes include consideration of the concept of level of understanding in the selection of nominal load and resistance values which is unique to LRFD foundation engineering practice in Canada. A practical conclusion from these calculations is that if product line-specific creep test data are available to estimate the reinforcement secant creep stiffness used for design, then a resistance factor of 1.0 is reasonable for US practice. If only minimum average roll value tensile strength data are available, then a value of 0.95 is recommended for US practice. For Canadian practice, the corresponding values for typical level of understanding are 0.90 and 0.85, respectively. [ABSTRACT FROM AUTHOR]

The accurate quantification of the temporal changes in seabed strength allows for more reliable and less conservative geotechnical design. A recently developed effective stress framework, established within a one-dimensional computational domain to quantify changes in soil strength due to pore pressure generation and dissipation, has been extended to a two-dimensional (2D) computational domain to allow for consideration of boundary value problems that are too complex to be simplified to one-dimensional conditions. The work to implement the 2D framework is reported across two companion papers. The first of the two papers utilises large deformation finite element analyses to quantify the spatial distribution of accumulated plastic shear strain. These distributions are encapsulated within a strain influence function that is used within the new 2D framework in this paper to calculate the extent and magnitude of excess pore pressure, and in turn the mobilised soil strength for a number of boundary value problems that represent typical offshore geotechnical processes. The merit of the new 2D framework is explored via retrospective simulations of existing experimental and numerical data. The resulting comparisons demonstrate the potential of the new framework, which is in quantifying the reliability of a range of geotechnical structures under complex loading conditions. [ABSTRACT FROM AUTHOR]

The undrained shear strength of contractive fine-grained soils changes with time, reducing due to pore pressure generation and increasing during consolidation. There is an increasing appetite to recognise these temporal soil strength changes in offshore geotechnical design, as it provides a basis for potentially less conservative designs. Contributions to this endeavour are reported across two companion papers. This first paper extends an existing effective stress framework that relates the generation of pore pressure to accumulated plastic shear strain, allowing undrained shear strength to be calculated within the context of critical-state soil mechanics. The main development is the extension of the computational domain to two dimensions, allowing calculations to be made for boundary value problems that cannot be satisfactorily simplified to one-dimensional conditions. The magnitude and distribution of accumulated shear strain surrounding objects buried in soil are quantified through a series of large deformation finite element analyses. These spatial distributions are described using a strain influence function in the new 2D framework to calculate the extent and magnitude of excess pore pressure, and in turn the mobilised soil strength around the buried object. The performance of the 2D framework is examined in the companion paper through retrospective simulations of experimental and numerical data. [ABSTRACT FROM AUTHOR]

Syncrude Canada Ltd.'s Base Mine Lake (BML), the first commercial-scale demonstration of an oil sands pit lake, was commissioned in December 2012, following in-pit deposition of fine tailings (FT) between 1995 and 2012. The geotechnical design basis for the FT in BML is that it will consolidate and densify over time, contributing to fines sequestration below the water cap. This paper presents the geotechnical performance of the FT in BML within the context of this geotechnical design basis. The FT has settled from 196.0 to 171.6 Mm3 by 2019, with cumulative settlement varying spatially between 0.3 and 6.7 m. FT settlement is consistent with the expected self-weight consolidation as modeled by finite-strain non-linear consolidation theory, and is reflected as temporal increase in the profiles of solids content and effective stress. Sonar surveying, profile sampling, shear strength, and underwater photography show that the transition of geotechnical properties at the mudline becomes increasingly distinct over time. These observations support the geotechnical design basis for BML and indicate the fines continue to be sequestered below the water cap. [ABSTRACT FROM AUTHOR]

The paper develops an analytical model based on the force equilibrium for the design of steep slope geosynthetic liner systems to overcome downdrag loads from waste settlement. This analytical model calculates the required tensile stiffness for a high strength/stiffness geotextile (HS-GTX) reinforcement over the GMB to limit the maximum HS-GTX tensile strain to 5% and the maximum GMB strain to 4% on the side slope. The numerical model illustrates the need for reducing the GMB tensile strains for a single GMB liner on a steep landfill slope and confirms that the use of a HS-GTX over the GMB is able to limit the maximum HS-GTX and GMB tensile strains to the acceptable strain levels. The analytical model developed in this paper is a practical tool for preliminary design to limit tensile strains of the HS-GTX and GMB in a steep slope geosynthetic liner system. [ABSTRACT FROM AUTHOR]

Soil shear strength is a fundamental property in analyzing the stability of soil masses in many geotechnical applications, such as slope stability, foundations, and retaining structures. Routinely application considers water as the interstitial fluid composing the soil, however, in some instance other liquids than water can infiltrate the ground due to accidental leakages of fuel and chemical substances. This paper evaluates the influence of fluids of different nature (water, ethanol, and diesel) on the shear strength of compacted specimens of clayey soil, both under saturated and unsaturated conditions. Test results show that the shear strength increases with suction and decreases with the dielectric constant for all the tested liquids. Based on simplified experimental procedures, two coupled models are proposed to reproduce the influence of soil suction and fluid dielectric constant on the soil shear strength and soil liquid retention curve, fairly reproducing experimental results, thus contributing to push unsaturated soil mechanics to geotechnical practice. [ABSTRACT FROM AUTHOR]

The article presents abstracts of papers published in "Canadian Geotechnical Journal" which have been selected for the 2016 R.M. Quigley Awards, including "Behavior of a group of energy piles" by Mimouni and Laloui, "Ageing of exposed geomembranes at locations with different climatological conditions" by Kerry Rowe and Ewais, and "Classification and quantification of downslope erosion from a geosynthetic clay liner (GCL) when covered only by a black geomembrane" by Brachman and others.

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper investigates the thermo-mechanical volume change behavior of municipal solid waste (MSW) by conducting drained heating–cooling tests at constant stresses and isothermal consolidation tests using a temperature-controlled triaxial apparatus. The experimental results show that the compression and swelling indexes of MSW specimen were temperature independent, and the heating-induced volumetric contraction was partially reversible upon cooling. Different from conventional soils, the thermally induced reversible and irreversible volumetric strains of MSW were much larger and stress level dependent. Apart from the experimental study, an isotropic thermo-elastoplastic constitutive model was developed in the framework of existing modified Cam-clay model, which allows the prediction of thermally induced volume changes of MSW. An important feature in this model was the derivation of thermally induced plastic volumetric strain based on the concept of equivalent stress. The capability of the proposed model was validated against the experimental results and showed good predictions. This paper serves as the first attempt to study the thermo-mechanical volume change behavior of MSW, and has provided additional data for the serviceability evaluation of existing pipes as well as settlement and capacity estimation of MSW landfills at elevated temperatures. [ABSTRACT FROM AUTHOR]

Abstracts of the articles published in the journal on geotechnical engineering are presented which include topics like K-stiffness method, behaviour of H-piles, and evaluation of hydraulic conductivity of geosynthetic clay liners under acidic conditions.

This study demonstrates the change in porosity of permeable reactive barrier (PRB) material when it reacts with acidic flow. The laboratory column test data obtained over 9 months prove that the porosity of a granular limestone assembly decreases significantly due to bio-geochemical clogging caused by a continuous flow of acidic groundwater. The variations in pH, the pressure measurements, ion concentrations, and the results from X-ray diffraction suggest that clogging at the outlet of the column is much less than at the inlet. About 57% of the total reduction in porosity of the column is attributed to chemical clogging, while the remainder is mainly due to biological clogging. In this paper, a mathematical approach is proposed to estimate the reduction of reactive surface area based on changes in the pore volume. These proposed equations suggest that at the end of experimentation, the dissolution of calcite and bio-geochemical clogging can reduce the total surface area of limestone aggregates by more than 70%. The rigorous approach presented in this paper to determine the dominant clogging component within a granular filter at a given time is vital in estimating the longevity of a PRB and for planning its maintenance. [ABSTRACT FROM AUTHOR]

Landslides are common across Canada and they pose hazards to human safety, economic activities, and the environment. Robust risk management strategies are necessary for sustainable development. A slope risk management framework has been adopted by the geotechnical community for approximately four decades allowing a systematic, consistent and transparent framework for managing risks. Implementing this framework is associated with uncertainties embedded in our estimates of risk. This paper presents a brief summary of the sources and categories of uncertainty in geotechnical slope engineering and focuses on two topics: (1) estimates of uncertainty in risk calculations and (2) temporal changes in landslide likelihood as a function of weather and steps towards estimating landslide risk changes with climate change. The paper argues that a quantitative risk assessment should not focus on the final risk calculation, but the overall knowledge gained. This allows comprehensive documentation of sources of uncertainty and how they impact geotechnical and risk assessments. Furthermore, the paper outlines approaches to define quantitative correlations between rock fall occurrences and weather, which can be leveraged to estimate changes in rock fall risk with climate change. The paper corresponds to, and expands on, the 2021 Canadian Geotechnical Colloquium. [ABSTRACT FROM AUTHOR]

The article presents a response to a commentary on the paper "Framework to Assess Newmark-Type Simplified Methods for Evaluation of Earthquake-Induced Deformation of Embankments," published in this issue. Topics discussed include directional orientation of Zipingpu Dam and its seismic data, vertical and horizontal displacements of the dam crest, and vibration of the dam. The settlement profiles of the dam at the end of construction at different elevations.

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper presents a study on the effect of the degree of saturation of the foundation soil on the vertical seismic response of end-bearing piles subjected to P-waves. The research focuses on nearly saturated soil, where the air phase is not continuous and air bubbles are dissolved in the pore water, and thus can be treated as two-phase material. The response of the two-phase soil–pile system is quantified by means of a rigorous coupled hydromechanical model, which is based on Biot's theory for poroelastic media and treats the air bubbles–pore water mixture as a homogeneous fluid obeying Boyle's law. Numerical results are used to illustrate the influence of the degree of saturation of the soil layer on the seismic strong motion transferred to the pile head, i.e., the capacity of piles to filter seismic wave energy. This work bridges the gap between single-phase and two-phase saturated soil models, which predict profoundly different pile head displacements at incident wave frequencies of practical interest, and elucidates the mechanisms that lead to these differences. [ABSTRACT FROM AUTHOR]

Pore water chemistry can exert significant controls over the chemo-mechanical behavior of chemically active soils, which has not been characterized by using the traditional Terzaghi's effective stress to a satisfactory extent. In this paper, based on the concept of intergranular stress, a generalized effective stress for saturated active soils is reconceptualized and incorporated into the framework of the modified Cam–Clay (MCC) model to describe the mechanical response of soils upon complex chemical and mechanical loadings. The proposed model is capable of capturing very well the diverse features of the chemo-behavior of saturated active soils, while inheriting all the advantages of the MCC model, by introducing only one additional parameter. Within this context, a simple equation is derived to predict the development of swelling pressure with the variation of pore water chemistry. It is shown that the proposed swelling-pressure equation predicts very well the development of swelling pressure for expansive soils with a dilute pore solution, though discrepancy appears at high concentration. Because the double layer of clay particles is severely suppressed at high salt concentration, the microfabric of soil can be significantly changed, pointing to the importance of taking into account the effect of soil fabric in the constitutive modeling of active soils with high pore water concentration. [ABSTRACT FROM AUTHOR]

For mooring systems, the relationship between chain axial resistance and confining stress affects the tension transfer of embedded mooring chain, and an effective width parameter Et was adopted to reflect the complex geometry of the chain. However, the relationship in carbonate sand is fully understood. Designed as an element test, monotonic and cyclic loading tests were conducted to investigate the variation of chain axial resistance with confining stress under different conditions in South China Sea carbonate sand. Peak effective width parameter and secant coefficient were particularly analyzed to describe the gradual mobilization. The results show that the Et value in South China Sea carbonate sand has a mean increase of 15% compared with Pingtan quartz sand, which makes the chain harder to pull into the carbonate sand. The irregular particle shape may contribute to the higher axial resistance. In cyclic tests, the peak post-cyclic Et-m is larger than that of monotonic test under lower confining stress but is smaller under higher stress. This paper provides some references to chain profile prediction in the carbonate sand. [ABSTRACT FROM AUTHOR]

An accurate understanding of the cyclic behavior of clays and plastic silts is important for system performance predictions during earthquake loading. This paper presents the results of a numerical investigation into the individual and combined influences of static shear stress and viscous strength gain on the cyclic resistance of clays and plastic silts. Using the viscoplastic constitutive model PM4SiltR implemented in the finite difference program FLAC 8.1, the cyclic behaviors of the plastic soils were simulated using single-element cyclic direct simple shear simulations. A parametric analysis was performed with different combinations of viscous strength gains and static shear stresses. The effects of static shear stress and viscous strength gain varied under monotonic and cyclic loading conditions. Numerical findings suggest empirical correlations developed using scant laboratory data may not accurately predict the reduction of cyclic strengths with increasing static shear stress. Furthermore, sizable magnitudes of monotonic viscous strength gains only produced a marginal increase in cyclic strengths. The findings from this study highlight the need for future experimental laboratory testing to validate the numerical findings, to improve the accuracy of performance predictions of geosystems constructed with clays and plastic silts during and following earthquake loading. [ABSTRACT FROM AUTHOR]

6.Databaseofloaddata Miyata and Bathurst (2019) developed a database of 113 measured steel grid loads (T max) from 11 instrumented steel grid walls constructed with cohesive-frictional soils and purely frictional soils. Reliability-based design and analysis for internal limit states of steel grid-reinforced mechanically stabilized earth walls. Thegeneralapproachdescribedin thispaperisanimportantcontributiontonext-generationanalysis and design using modern concepts of RBD for internal stability design of both steel and polymeric soil-reinforced MSE walls and is thus in alignment with the international movement towards RBD for geotechnical structures (e.g., Low and Phoon 2015;Phoon2017;PhoonandChing2015;ISSMGE2017). Allen et al. (2001, 2004) quantified the level of accuracy of the Simplified Method for steel MSE walls using bias statistics deduced from a large number of instrumented walls. 1.Introduction This paper is focused on reliability-based design (RBD) and analysis for tensile strength and pullout limit states of steel grid-reinforced mechanically stabilized earth (MSE) walls constructed with frictional soils and subjected to typical operational conditions. [Extracted from the article]

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Canadian Geotechnical Journal is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The article presents a discussion of the research paper "Influence of Particle-Size Distribution Homogeneity on Shearing of Soils Subjected to Internal Erosion" by S. Li, A. R. Russell and D. Muir Wood published in the "Canadian Geotechnical Journal" in 2020. The discussion provided a few observations about the test procedure and preparation of soil samples used to study the internal erosion process of granular soils. It also addressed the threshold value of fines.

Lugeon tests, also known as water pressure tests, are widely used to estimate the transmissivity of rock-fracture networks and are considered standard testing for grouting of dam foundations. The Lugeon test consists of injecting water into an isolated borehole section intersecting several fractures and monitoring water pressure and flow rate over time to estimate the rock fractures' transmissivity. An average fracture aperture for the whole section is then estimated from the transmissivity value, which is used for selecting the appropriate grout mix. However, the current procedure does not provide any information on the variability in aperture sizes within the investigated rock interval. This paper presents a new approach for performing Lugeon testing that allows for providing a probabilistic distribution of fracture apertures by injecting bio-degradable non-Newtonian fluids at different pressures/flow rates. The theoretical framework demonstrating the ability to estimate the dimensions of multiple fractures, in parallel and in series, from non-Newtonian fluid injection tests is presented. Then, experimental results on different combinations of simple fractures, made of parallel plates, are used to validate the derived model and evaluate its performance. [ABSTRACT FROM AUTHOR]

In mining, open pits have slopes cut as steep as possible to ensure efficient mining yet not too steep to jeopardize safety. Building on existing contributions, the Texas A&M University Mine Slope database (TAMU-MineSlope) was created to provide global-scale insights into the runout mechanics of open pit slope failures and offer the database to engineers for further study. The database includes 134 cases of open pit slope failures that occurred at 76 mines worldwide. Based on energy principles and an analysis of the TAMU-MineSlope data, an equation to predict the travel distance of the slope failure mass is presented in this paper. Furthermore, based on the case histories analysis, an equation to predict the setback distance is proposed. Finally, the TAMU-MineSlope database shows that the average width to height ratio of the failing slope mass is 2.7 and that, for this ratio, the 3D factor of safety (FS) can reach a value 15% higher than the 2D FS. The database has been released in the public domain. [ABSTRACT FROM AUTHOR]

The accurate prediction of swelling deformation and(or) swelling pressure if confined for expansive soils is essential for a better design and construction of a geotechnical structure that is built on or in an expansive soil. In this paper, we proposed a new method to quantify the swelling strain and(or) swelling pressure of expansive soils by considering the mineralogical components and their different swelling properties. The proposed multi-component model employs a tandem combination of different sub-molecular oedometers for different minerals, and the total swelling strain of soil was calculated by integrating the swelling strain of each mineral. A linear relationship between potential energy and swelling strain is identified based on molecular dynamics' simulation, which is then incorporated into the diffuse double-layer theory to calculate the relationship between confining pressure and swelling strain for each mineral. The numerical model was then validated by experimental results from the literature, which shows a good agreement with the experimental data in the literature. This model provides a cost-effective way to estimate the swelling behavior of expansive soil. [ABSTRACT FROM AUTHOR]

Foundation reuse is the development trend of sustainable engineering construction. However, the reuse of existing piles as rigid inclusions and their contribution to newly constructed piles (new piles) under different new and existing pile spacings are still insufficiently understood. In this paper, a series of numerical investigations were conducted based on centrifuge tests to examine the effect of existing piles on the lateral behavior of new piles under different pile spacings. The existing pile efficiency that reflects the contribution of existing piles to the lateral capacity of new piles was analyzed, and it was shown that the impact of existing piles decays exponentially with the pile spacing between new and existing piles. Beyond the spacing of 6D (D: the diameter of new piles), the lateral new pile–soil–existing pile interaction can be neglected. A parametric study was subsequently performed to quantify the existing pile efficiency under different variables, including the new pile-head restraint, loading displacement, bending stiffness, load eccentricity, embedded depth, and soil properties. Finally, an existing pile efficiency-based method for the estimation of the lateral capacity of new piles was proposed, which provides an efficient way to design laterally loaded new piles in sites with existing piles. [ABSTRACT FROM AUTHOR]

Plate anchors are an attractive technology for mooring floating facilities; as relative to piles, suction caissons, and drag anchors, they provide a much higher capacity relative to their mass. Plate anchors may experience an extreme loading event that will cause geotechnical failure, although they will still retain a residual capacity. The displacement associated with bringing the anchor to failure will induce excess pore pressures that initially reduce soil strength but will dissipate over time, leading to regains in soil strength and hence anchor capacity. This paper considers the time scales and magnitude of this anchor capacity regain through a series of model scale experiments conducted in a geotechnical centrifuge. The experiments involved vertical loading of pre-embedded horizontally orientated circular anchors in normally consolidated kaolin clay. The results show that anchor capacity regain is a function of consolidation time and the level of resistance maintained on the anchor, with the longest consolidation time and highest maintained resistance leading to a capacity regain of approximately 60%. These capacity increases are described here using a simple hyperbolic function, which provides a basis for estimating the time needed for the residual anchor capacity to regain sufficient capacity following a movement event. [ABSTRACT FROM AUTHOR]

This study proposed a probabilistic generic transformation model between two rock mass properties, specific fracture energy, Ev, and P-wave velocity, VP. To build the transformation model, 12 pairwise data sets of Ev and VP were collected from six different construction sites involving construction of mountain tunnels in Japan. This database is labeled as "RockMass/2/350". A probabilistic transformation model was built based on a bivariate standard normal distribution with these 350 data points. The model is generic, because it is based on a variety of sites. The performance of the constructed transformation model was evaluated through a cross-validation. It was found that 98.2% of the validation data fell within the computed 95% confidence interval of the model estimation, and this result provides a preliminary validation of the probabilistic transformation model. Unlike existing deterministic transformation models for estimating VP from Ev, the proposed model can explicitly evaluate the transformation uncertainty with a quantitative metric such as a percentile. For practical application, a 3D model of the spatial distribution for Young's modulus, E, was visualized based on the proposed transformation model. Since the proposed model is probabilistic, it can provide the spatial distribution for percentiles of E values. The constructed 3D model presented in this paper can be directly used as an input data for finite element or finite difference analysis, and probabilistic evaluation of excavation simulation is feasible based on the proposed probabilistic model. The quantitative information on such uncertainty can be useful in decision-making for tunnel constructions, such as selection of a cautious characteristic value. [ABSTRACT FROM AUTHOR]