Search

The accurate quantification of the temporal changes in seabed strength allows for more reliable and less conservative geotechnical design. A recently developed effective stress framework, established within a one-dimensional computational domain to quantify changes in soil strength due to pore pressure generation and dissipation, has been extended to a two-dimensional (2D) computational domain to allow for consideration of boundary value problems that are too complex to be simplified to one-dimensional conditions. The work to implement the 2D framework is reported across two companion papers. The first of the two papers utilises large deformation finite element analyses to quantify the spatial distribution of accumulated plastic shear strain. These distributions are encapsulated within a strain influence function that is used within the new 2D framework in this paper to calculate the extent and magnitude of excess pore pressure, and in turn the mobilised soil strength for a number of boundary value problems that represent typical offshore geotechnical processes. The merit of the new 2D framework is explored via retrospective simulations of existing experimental and numerical data. The resulting comparisons demonstrate the potential of the new framework, which is in quantifying the reliability of a range of geotechnical structures under complex loading conditions. [ABSTRACT FROM AUTHOR]

The undrained shear strength of contractive fine-grained soils changes with time, reducing due to pore pressure generation and increasing during consolidation. There is an increasing appetite to recognise these temporal soil strength changes in offshore geotechnical design, as it provides a basis for potentially less conservative designs. Contributions to this endeavour are reported across two companion papers. This first paper extends an existing effective stress framework that relates the generation of pore pressure to accumulated plastic shear strain, allowing undrained shear strength to be calculated within the context of critical-state soil mechanics. The main development is the extension of the computational domain to two dimensions, allowing calculations to be made for boundary value problems that cannot be satisfactorily simplified to one-dimensional conditions. The magnitude and distribution of accumulated shear strain surrounding objects buried in soil are quantified through a series of large deformation finite element analyses. These spatial distributions are described using a strain influence function in the new 2D framework to calculate the extent and magnitude of excess pore pressure, and in turn the mobilised soil strength around the buried object. The performance of the 2D framework is examined in the companion paper through retrospective simulations of experimental and numerical data. [ABSTRACT FROM AUTHOR]

The paper develops an analytical model based on the force equilibrium for the design of steep slope geosynthetic liner systems to overcome downdrag loads from waste settlement. This analytical model calculates the required tensile stiffness for a high strength/stiffness geotextile (HS-GTX) reinforcement over the GMB to limit the maximum HS-GTX tensile strain to 5% and the maximum GMB strain to 4% on the side slope. The numerical model illustrates the need for reducing the GMB tensile strains for a single GMB liner on a steep landfill slope and confirms that the use of a HS-GTX over the GMB is able to limit the maximum HS-GTX and GMB tensile strains to the acceptable strain levels. The analytical model developed in this paper is a practical tool for preliminary design to limit tensile strains of the HS-GTX and GMB in a steep slope geosynthetic liner system. [ABSTRACT FROM AUTHOR]

This paper presents a study on the effect of the degree of saturation of the foundation soil on the vertical seismic response of end-bearing piles subjected to P-waves. The research focuses on nearly saturated soil, where the air phase is not continuous and air bubbles are dissolved in the pore water, and thus can be treated as two-phase material. The response of the two-phase soil–pile system is quantified by means of a rigorous coupled hydromechanical model, which is based on Biot's theory for poroelastic media and treats the air bubbles–pore water mixture as a homogeneous fluid obeying Boyle's law. Numerical results are used to illustrate the influence of the degree of saturation of the soil layer on the seismic strong motion transferred to the pile head, i.e., the capacity of piles to filter seismic wave energy. This work bridges the gap between single-phase and two-phase saturated soil models, which predict profoundly different pile head displacements at incident wave frequencies of practical interest, and elucidates the mechanisms that lead to these differences. [ABSTRACT FROM AUTHOR]

Pore water chemistry can exert significant controls over the chemo-mechanical behavior of chemically active soils, which has not been characterized by using the traditional Terzaghi's effective stress to a satisfactory extent. In this paper, based on the concept of intergranular stress, a generalized effective stress for saturated active soils is reconceptualized and incorporated into the framework of the modified Cam–Clay (MCC) model to describe the mechanical response of soils upon complex chemical and mechanical loadings. The proposed model is capable of capturing very well the diverse features of the chemo-behavior of saturated active soils, while inheriting all the advantages of the MCC model, by introducing only one additional parameter. Within this context, a simple equation is derived to predict the development of swelling pressure with the variation of pore water chemistry. It is shown that the proposed swelling-pressure equation predicts very well the development of swelling pressure for expansive soils with a dilute pore solution, though discrepancy appears at high concentration. Because the double layer of clay particles is severely suppressed at high salt concentration, the microfabric of soil can be significantly changed, pointing to the importance of taking into account the effect of soil fabric in the constitutive modeling of active soils with high pore water concentration. [ABSTRACT FROM AUTHOR]

For mooring systems, the relationship between chain axial resistance and confining stress affects the tension transfer of embedded mooring chain, and an effective width parameter Et was adopted to reflect the complex geometry of the chain. However, the relationship in carbonate sand is fully understood. Designed as an element test, monotonic and cyclic loading tests were conducted to investigate the variation of chain axial resistance with confining stress under different conditions in South China Sea carbonate sand. Peak effective width parameter and secant coefficient were particularly analyzed to describe the gradual mobilization. The results show that the Et value in South China Sea carbonate sand has a mean increase of 15% compared with Pingtan quartz sand, which makes the chain harder to pull into the carbonate sand. The irregular particle shape may contribute to the higher axial resistance. In cyclic tests, the peak post-cyclic Et-m is larger than that of monotonic test under lower confining stress but is smaller under higher stress. This paper provides some references to chain profile prediction in the carbonate sand. [ABSTRACT FROM AUTHOR]

An accurate understanding of the cyclic behavior of clays and plastic silts is important for system performance predictions during earthquake loading. This paper presents the results of a numerical investigation into the individual and combined influences of static shear stress and viscous strength gain on the cyclic resistance of clays and plastic silts. Using the viscoplastic constitutive model PM4SiltR implemented in the finite difference program FLAC 8.1, the cyclic behaviors of the plastic soils were simulated using single-element cyclic direct simple shear simulations. A parametric analysis was performed with different combinations of viscous strength gains and static shear stresses. The effects of static shear stress and viscous strength gain varied under monotonic and cyclic loading conditions. Numerical findings suggest empirical correlations developed using scant laboratory data may not accurately predict the reduction of cyclic strengths with increasing static shear stress. Furthermore, sizable magnitudes of monotonic viscous strength gains only produced a marginal increase in cyclic strengths. The findings from this study highlight the need for future experimental laboratory testing to validate the numerical findings, to improve the accuracy of performance predictions of geosystems constructed with clays and plastic silts during and following earthquake loading. [ABSTRACT FROM AUTHOR]

Understanding triggering mechanisms of slope failure is of great importance to the stability analysis and safety warning of waste landfill. This paper presents a centrifuge model test on slope failure induced by elevated gas pressure in wet landfill. The formation process of liquid level and gas pressure in the landfill is simulated by means of liquid and gas injections under a centrifugal acceleration of 66.7 g. The injected liquid contains surfactants, which allow it to generate foam in the waste pores when mixed with the injected gas. The pore gas and liquid pressures under two-phase flow condition are monitored separately to clarify the instability process. It is found that the continuous gas injection makes the pore gas pressure increase to peak values of 83.0 kPa–100.8 kPa, which are higher than the peak liquid pressures of 61.3 kPa–75.6 kPa. The formation of high gas pressure zone is attributed to the low gas permeability, which is affected by high liquid saturation as well as foam generation. The slope failure occurs when the pore gas pressure increases to the peak value and the corresponding shear strength decreases to the critical value. Although the gas injection raises the liquid level, the factor of safety of landfill slope will be overestimated if only considering the effect of liquid pressure. According to the response curves of displacement to gas pressure rise, the critical ratios of gas pressure to earth pressure are determined to be 0.74–0.84, which fall within the range of the prototype landfill. The difference between foam and air on pore pressure distribution is also calculated and discussed. [ABSTRACT FROM AUTHOR]

Applications of Bayesian updating commonly treat soil parameters as random variables. A significant issue with this is that soil parameters are highly subjective. Therefore, using traditional parameter-based models, Bayesian analysis starts from a subjective prior and it is unclear how this may influence the overall results of a study. In this paper, Bayesian updating is combined with a data-driven method, known as CRACA (i.e., CReep And Consolidation Analysis), for predicting the settlement of embankments on soft soil. Importantly, the method directly ingests measured oedometer data and, therefore, avoids the subjectivity involved in parameter selection. Because parameters are not used, scaling factors are introduced that account uncertainty associated with the laboratory measurements and the automated interpretation process. These factors have an initial value of unity (returning the prior) and are updated in a Bayesian framework as settlement monitoring data are revealed over time to improve future forecasts. The model was applied to an embankment case history and was shown to result in a rapid improvement in the accuracy and a narrowing of the 95% confidence interval as settlement monitoring data are revealed to the model. [ABSTRACT FROM AUTHOR]

Tolerably mobile subsea foundations are designed to slide on the seabed to accommodate flowline thermal expansion and contraction, and are a potential alternative to conventional (fixed) foundations. During the periodic sliding events that occur during operation, soil berms form at the extremities of the foundation footprint. The size of the berm increases throughout the life-cycle of the foundation, leading to increasing peak sliding resistance. This may hinder mobility of the foundation and overstress the pipeline connections that the foundation is designed to support. Equally, the berms may be relied on to reduce sliding and thus minimize settlement of the foundation, which can also overstress pipeline connections. This paper analyses the mechanism leading to berm accumulation and its mobilisation, also addressing periodic remoulding and reconsolidation of the sediment in the berm. A framework is proposed to predict the accumulation of soil berms and the resulting peak sliding resistance, and is validated by eight centrifuge model tests performed on a kaolin clay and a calcareous silt. [ABSTRACT FROM AUTHOR]

This paper aims to analyze and describe the geotechnical behavior of a piled raft foundation of a tall building (53 floors, 172.4 m high) through the monitoring of strains in the building's columns and piles, the stresses at the raft–soil interface, and the foundation settlements. Field and laboratory tests were performed, and associated with axisymmetric and three-dimensional finite element analysis to the assessment of the measured data. The monitoring of the pile strains suggests the occurrence of soil expansion, caused by the raft excavation process, up to approximately 6 months after the excavation was completed. The presence of different soil profiles under the raft, with different mechanical properties, affected the distribution of the foundation settlements and the pile loads. Initially, the average pile loads were concentrated in the perimeter elements, but, as the construction of the building evolved, they tended to become more uniform. The effect of the superstructure stiffness caused successive load redistributions in the columns, which contributed to the maintenance of the maximum angular distortion of the building within the allowable values and reduced the load difference between the piles positioned in opposite soil profiles. [ABSTRACT FROM AUTHOR]

The strength and stiffness of a composite rockmass (intact material, defects, joints, bedding, etc.) are primary inputs for the engineering analysis of rock slopes and underground excavations. The Geological Strength Index (GSI) has served rock engineering for three decades as a rockmass assessment system based on the blockiness of the rockmass and discontinuity condition. GSI is used to factor the Hoek–Brown strength envelope for intact rock to represent jointed rockmasses in conventional equivalent-continuum numerical modelling. Modern numerical tools can represent networks of discrete (explicit) structure with assigned discontinuity properties. This provides an opportunity to compare explicit structural modelling with the conventional implicit equivalent-continuum approach. In this paper, explicit structural models are developed using elasto-plastic (constant-strength) constitutive models for intact rock and realistic parametric ranges for explicit structure properties. Explicit model results are compared to equivalent-continuum results, validating the classical implicit approach while also identifying key limitations. Explicit models with post-yield weakening of the intact and structural elements are then developed and compared to post-yield weakening implicit models that use post-yield dilation and empirical relationships between peak and residual GSI. The results provide guidance for practical modelling in strain-weakening rockmasses, including recommendations for post-yield dilation in the traditional implicit approach. [ABSTRACT FROM AUTHOR]

Assessing foundation response to cyclic loading is vital when designing transport infrastructure, such as road pavements and rail tracks, as well as offshore, port, and tall tower structures. While detailed guidance is available on characterizing many soil types' cyclic behavior, relatively few studies have been reported on stiff, geologically aged, plastic clays. This paper addresses this gap in knowledge by reporting cyclic loading experiments on three natural stiff UK clays that were deposited and buried between the Jurassic Age and Eocene Epoch before geological unloading to their currently heavily over-consolidated states. High-quality samples taken at relatively shallow depths were reconsolidated to nominally in situ K0 stresses in triaxial and hollow cylinder apparatus before imposing cyclic loading. The completely stable, metastable, or unstable outcomes invoked by different levels of undrained cyclic loading are interpreted within a kinematic yielding framework that is compatible with monotonic control experiments' outcomes. The cyclic limits marking the onset of significant changes in permanent strain accumulation, pore pressure development, and stress–strain hysteresis demonstrate that the weathered Gault clay offers the lowest cyclic resistance. The experiments show that energy considerations provide a promising way of evaluating undrained pore pressure generation and stiffness degradation. They also provide a basis for developing cyclic constitutive models and analysis procedures for cyclic foundation design in stiff, high-OCR, plastic clay strata. [ABSTRACT FROM AUTHOR]

This paper develops a hierarchical Bayesian model (HBM) that integrates the physical knowledge and the test data to predict the small-strain shear modulus Gmax for a target sand type. The limited target-specific data are combined with the abundant generic data through a hierarchical structure so that the variability of Gmax within one sand type and across different sand types can be captured. The hyperparameters that characterize the same underlying distribution of physical model parameters across all the sand types are first estimated from the abundant generic data. The model parameters for the new sand type are then updated as the limited site-specific data become available. The approach is illustrated using a generic database and two real examples not covered by the generic database. Multiple possible hierarchical models are compared in terms of model complexity and goodness-of-fit. The results show that the hierarchical modeling of small-strain shear modulus data is reasonable and necessary. The hierarchical model can provide less biased and more accurate predictions of Gmax compared to the commonly used complete pooling model, especially in cases where the site-specific data are quite different from the overall average of the generic database. [ABSTRACT FROM AUTHOR]

This paper presents the results of field tests performed to investigate the installation effects of pre-bored grouted planted (PGP) pile in deep clayey soil. The variation of horizontal soil displacements, excess pore water pressures and lateral soil pressures was measured in the PGP pile installation process. The test results show that the drilling and grouting process induced large horizontal soil displacements in the soil within a radial distance of 2 d (d is pile diameter), and the maximum horizontal soil displacements induced by the drilling and grouting process were smaller than 15.9 mm when the radial distance reached 4–5 d. Moreover, the horizontal soil displacements decreased along the soil layer depth, as the superficial soil layers were of small deformation modulus and lateral soil pressure. The drilling process brought large excess pore water pressures in the soil when the radial distance was less than 3 d, and the excess pore water pressures induced by the drilling stage were all less than 55 kPa when the radial distance reached 4–6 d. The drilling process also induced some lateral soil pressure increases in the soil within a radial distance of 3 d, while the measured maximum lateral soil pressure increases were smaller than 10.9 kPa when the radial distance increased to 4 d. On the whole, the excess pore water pressures and lateral soil pressure increases induced by the installation of PGP pile were much smaller than that induced by the installation of driven PHC pile. Moreover, the horizontal soil displacements, excess pore water pressures and lateral soil pressure increases induced by the installation of PGP pile all recovered rapidly after the installation of pile, as the cemented soil in the pile hole was in liquid state after the drilling and grouting stage. [ABSTRACT FROM AUTHOR]

This note presents the application of the mobilisable strength design (MSD) method to the monitoring results of the multi-propped excavation in the south area of the British Library Euston, constructed in a highly overconsolidated stiff clay deposit. The MSD method is an energy-based approach (a nonlinear finite-element method for a single-degree-of-freedom soil-wall system) introduced to develop a simplified design methodology that satisfies both ultimate and serviceability limit states. Wall displacement predictions based on the MSD method are compared with considerable field monitoring data. The sensitivity of the method to reasonable variations in input parameters is considered. A spreadsheet and python code demonstrating the MSD analysis from this paper are provided in the online supplement alongside details of the mathematical formulation. [ABSTRACT FROM AUTHOR]

In this paper, eight shear tests were carried out utilising a double shear with infilled shear interfaces after determining an appropriate experimental design and modified testing scheme. For this, two rock bolts, 20 and 30 tonnes, were tested with modified double shear testing apparatus at different pretension loads. The infilled test scheme was conducted with 5 mm thick sandy clay infilled shear interfaces. A 40 MPa small aggregate concrete was used for all samples to simulate the host rock. Based on the shear profiles, it was found that all samples followed a three-part failure profile consisting of elastic, strain softening, and failure regions. The results of double shear tests revealed that the 20 tonne rock bolt saw a significant overall decrease of approximately 30% in its failure displacement response as opposed to the 30 tonne samples, which saw a 6% increase. Also, it was concluded that the 30 tonne samples outperformed the 20 tonne rock bolts by up to 30%, irrespective of initial pretension settings. Comparing the physical failure characteristics of the samples found that both the 20 and 30 tonne samples exhibited the same response to increased pretension. As the pretension increased, the angle experienced at the hinge point also increased incrementally. [ABSTRACT FROM AUTHOR]

Integral bridges are built without expansion joints to avoid many of the persistent issues with joint degradation and maintenance problems regularly experienced by traditional bridges. In the absence of expansion joints, the cyclic thermal displacements of the integral bridge would be transferred unmitigated by the joints to the abutment resulting in accentuated soil–structure interactions. Previous studies have mainly focussed on the rotational mode of integral abutment movement while the translational mode of movement and backfill deformations have received much less attention. This paper presents the results of laboratory tests conducted on a semiscale (1:2) physical model, which was designed using dimensional analysis to achieve field stress and strain similarity with a full-scale 1.92 m high-prototype integral abutment. The comparative effects from five tests covering low to high cyclic translation amplitude on backfill surface settlement and heave, and lateral earth pressures behind the abutment were investigated over assumed 120 seasonal cycles. Asymptotic settlement depth of the backfill was obtained in each test. Full passive failure surface was observed when the cyclic translation amplitude of the test exceeded the threshold amplitude. The findings also suggest that the settlement depth seemed to be linked to the development of passive failure surface in the following sense—the asymptotic settlement depth in those tests which developed full passive failure surface would attain the same (ultimate) asymptotic depth; conversely, when the passive failure surface had not or only partially developed in that test, the asymptotic settlement depth was dependent on the cyclic translation amplitude, but it was less than the ultimate observed for full passive failure surface. Lateral earth pressure only stabilized to an asymptotic state for the test with the lowest cyclic translation amplitude during the 120 cycles. Shakedown limit state was observed for this case. At larger cyclic translation amplitudes, the lateral earth pressure did not stabilize but continued to evolve with the elapsed cycles, and shakedown limit state was not observed for these cases. [ABSTRACT FROM AUTHOR]

The shear stress–shear displacement relationship and shear strength parameters of the interface between the pipe and the surrounding soil are important for designing the jacking force. One most commonly used method to measure the shear strength of the pipe–soil interface is the direct shear test. This paper presents the results of a series of direct shear tests conducted in the laboratory on the pipe–soil interfaces for different moisture contents. Simultaneously, digital image correlation is used to supplement the research of the horizontal displacement field of the interface. The results show that the increase of normal stress will makes the interface more prone to strain hardening during the shearing process, and the influence of the change of specimen moisture content on the interface strain characteristics gradually weakens. The shearing process of the specimen mainly involved shearing contraction, and slight shear dilation occurs only when the moisture content is small. We proposed a unified model for describing the shear volumetric change caused by the combined action of moisture content and normal stress. The shear displacement field presents a layered distribution, which is related to the shear displacement corresponding to the shear stress. [ABSTRACT FROM AUTHOR]

This study offers an analytical solution for radial consolidation that captures the biogeochemical clogging effect in acid sulfate soils. Field sites and personal communication with industry practitioners have provided evidence of piezometers exhibiting retarded pore pressure readings that do not follow conventional soil consolidation and seepage principles when installed in coastal acidic floodplains. This retarded response together with a variation in pH, ion concentrations, and piezometric heads provided evidence of clogging at and around the piezometers. This paper uses the proposed biogeochemical clogging model, which is an analytically derived system of equations to estimate the excess pore water pressure dissipation of piezometers installed in clogging-prone acid sulfate soils. The inclusion of the total porosity reduction attributed to biological and geochemical clogging improves the predictions of the retarded dissipation of excess pore pressure, especially after about 1 year. This method is validated for two previously identified acidic field sites in coastal Australia, where piezometers measured a very slow rate of dissipation. It is concluded that this model has potential to accurately monitor the performance of critical infrastructure, such as dams and embankment foundations built on acidic terrain. [ABSTRACT FROM AUTHOR]

Fluid fine tailings (FFT) are a by-product of the process used to extract bitumen from surface-mined oil sands in Alberta, Canada. One of the FFT reclamation techniques involves mixing centrifuged FFT with coarse sand tailings to form non-segregating tailings (NST). While NST provides a means to achieve mine closure and reclamation objectives, the self-weight consolidation of NST takes years to complete in full-scale testing. This paper examines the use of bench-scale centrifugation for physical modelling of the consolidation of NST under centrifuge loading. A series of bench-scale centrifuge tests is conducted on NST specimens reconstituted at different sand–fines ratios (SFRs), along with conventional oedometer and standpipe tests. Micro-computed tomography technique with high resolution is used to quantify the internal structure of the centrifuged specimens, and to infer the segregation and consolidation behaviour of NST specimens under 1-g and centrifuge loading. No segregation is detected in NST specimens under 1-g loading, while segregation occurs in NST specimens with low SFRs under centrifugal loading. Thus, only consolidation behaviour of NST specimens without segregation is investigated and compared to those determined from conventional oedometer tests. Limitations on use of bench-scale centrifuge in physical modelling of consolidation behaviour of oil sands tailings are addressed. [ABSTRACT FROM AUTHOR]

Helical piles are used extensively for low and medium rise developments and are a popular foundation solution in cases where resistance to significant uplift loads is required. The ability to re-use helical piles and recent interest in their use as foundations in offshore wind and solar energy applications has renewed interest in improving existing design methods. This paper presents the results from field investigations in medium dense and dense sand that examine effects on the axial tension and compression capacity of varying the helix pitch, shaft diameter, advancement ratio and shaft tip geometry. The results from the 20 pile tests conducted (many of which included instrumentation) indicate low sensitivity to a range of the investigated parameters and a strong correlation of the capacity to the cone penetration test resistance. A design method based on these findings is proposed for typical helical pile geometries and is shown to provide predictions that are generally within 10 to 15% of the axial capacities reported for 30 other well documented pile tests reported in the literature. The method, referred to as UWASP-22, incorporates a simple means of estimating the load-displacement response of a helical pile as well as a formulation enabling prediction of the installation torque which is a common quality control measure for helical piles. [ABSTRACT FROM AUTHOR]

Excessive settlements or failure of piles observed in some Brazilian unsaturated soil sites indicates that the shaft resistance can vary with the seasonal variability of top soil water content, especially in the case of foundations of transmission towers or installed at the periphery of buildings, situations in which the soil is more susceptible to suction fluctuation due to the higher exposure to rainfall action. The objective of the research described in this paper was to provide field evidence with the purpose of alerting practising engineers and to help researchers to better understand the contribution of matric suction on pile capacity. For this aim, the seasonal variability of the shaft resistance of Continuous Flight Auger (CFA) piles in a typical Brazilian unsaturated tropical soil was evaluated by performing axial tensile load tests on eight instrumented CFA piles in different periods of the year. Soil suction was monitored throughout the period of tests, and the results indicate that the shaft resistance of the pile upper part varies considerably during the year and tends to decrease with decreasing soil suction. This work provides valuable insights into the application of unsaturated soil mechanics, which is usually disconnected to classical geotechnical practice. [ABSTRACT FROM AUTHOR]