Search

Accurate orthodontic analysis and diagnosis based on anatomical landmarks is essential to the success of orthodontic treatment. Helical computed tomography (CT) has evolved markedly, and dentists can now quickly obtain 3-dimensional (3D) reconstruction data using this imaging modality. The planning of orthodontic treatment had traditionally been based on cephalometric analysis using 2D landmarks. This study aimed to collect 3D morphological data using CT images to establish new landmarks for analysis and diagnosis in orthodontic treatment. Twenty male and 20 female adult Japanese dry skulls with of normal occlusion were selected. The skulls were scanned using a multidetector helical CT system (SIEMENS, Volume Zoom Plus 4, Germany). Models were reconstructed using 3D measurement software (Simplant, Dentsply Sirona, Tokyo, Japan) and 45 landmarks determined. Three-dimensional measurement for a total of 30 items representing these landmarks was then performed. The results provided 3D standard values for maxillofacial morphology in adult Japanese individuals with normal occlusion. These measurement items should allow the disadvantages of 2D cephalometric analysis to be overcome.

Whether there is a relationship between impaction of the third molars and the onset of crowding remains to be determined, and extraction of third molars after orthodontic treatment is left to the judgement of the practitioner. This report describes a case where a third molar caused external root resorption (ERR) of the mandibular second molar after orthodontic treatment. As ERR of the mandibular second molar was detected after non-extraction orthodontic treatment, the affected tooth was extracted and substituted with the third molar. External root resorption of the second molar occurred despite being determined as low risk given the state of the impacted third molar as observed on a panoramic radiograph obtained at the end of active treatment. The present results indicate that in cases where the mandibular third molar is present, the corpus length is short, and non-extraction treatment has been performed, it is necessary to obtain X-ray images on a regular basis or preventively extract the third molar to avoid ERR of the second molars.

Repositioning of the jaw in orthognathic treatment generates changes in the soft tissues of the maxillofacial region, with consequent changes in the airway. The purpose of this study was to determine how type of orthognathic surgical procedure affected the 3-dimensional morphology of the upper airway. Forty patients were divided into the following 2 groups according to the type of surgical procedure used: a horseshoe osteotomy (HS) group (20 patients, comprising 11 men and 9 women; average age 24.3±4.5 years) who underwent bimaxillary surgery; and a LeFort I osteotomy (LF) group (20 patients, comprising 8 men and 12 women; average age 22.5±4.6 years) who also underwent bimaxillary surgery. Cephalometric measurements were taken and 3-dimensional pharyngeal morphology evaluated in each group. The amounts of maxilla rotation, posterior maxilla impaction, and mandibular setback all revealed a significantly larger value in the HS group. Evaluation of pharyngeal volume revealed a significant decrease in the upper pharyngeal segment in the LF group. A significant decrease in the lower pharyngeal segment was observed in both groups. Differences were noted in postoperative pharyngeal morphology between the two groups. The results of this study suggest that HS has less effect on the upper pharyngeal segment, regardless of the amount of posterior maxilla impaction.

Aggressive periodontitis mostly affects young people, causing rapid destruction of periodontal tissue and loss of supporting alveolar bone. The destruction of periodontal tissue induces pathological tooth movement, resulting in various types of malocclusion such as crowding or spacing in the dentition. This report describes orthodontic treatment for malocclusion due to generalized aggressive periodontitis. The patient was a 31-year-old woman who presented with the chief complaint of displacement in the anterior teeth. An oral examination revealed pathological tooth mobility throughout the entire oral cavity due to severe loss of periodontal support. Many gaps in the displaced maxillary anterior teeth and crowding in the mandibular anterior teeth were also observed. The goal of subsequent treatment was to achieve ideal overjet and overbite by aligning the teeth and closing the spaces via non-extraction orthodontic treatment with stripping. The periodontal disease was managed by a periodontist who provided guidance on oral hygiene and periodontal disease control throughout the course of orthodontic treatment. Appropriate occlusion and a good oral environment were achieved. The condition of the periodontal tissue stabilized during and after orthodontic treatment, and favourable occlusal stability was observed at the 2-year follow-up examination.

Aggressive periodontitis during adolescence has a poor prognosis due to rapid alveolar bone resorption. Few studies have investigated long-term follow-up after surgical orthodontic treatment performed in conjunction with that for invasive periodontitis. Here, we report a case of mandibular prognathism accompanied by generalized aggressive periodontitis and crowding. A 31-year-old woman was referred to our department for treatment of masticatory dysfunction due to reverse overjet. The patient exhibited a class III molar relationship, protrusion of the ANB of －6.0°, and severe maxillary crowding. Initial periodontal examination revealed deep periodontal pockets and extensive inflammation. Mandibular prognathism accompanied by generalized aggressive periodontitis and crowding was diagnosed. Therefore, it was necessary to adopt an interdisciplinary approach involving surgical, orthodontic, and periodontal treatment. Prior to commencement of orthodontic treatment, plaque control, scaling, and root planing of all teeth were performed by a periodontist to suppress inflammation and reduce probing depth. During pre-surgical orthodontic treatment, the maxillary first premolars were extracted to reduce crowding of the maxillary incisors. To correct the mandibular prognathism, the mandible was repositioned by sagittal split ramus osteotomy. Proper occlusion of the incisors and maximum intercuspation were achieved by post-surgical orthodontic treatment. After completion of active orthodontic treatment, acceleration of inflammation was observed together with aggravated resorption of the alveolar bone surrounding the molars. However, reduction of probing depth and inflammation were observed after scaling and root planing. The surgical-orthodontic treatment time was 1 year and 11 months, which was followed by a 2-year retention period. There was no tooth loss due to periodontitis, and an overall satisfactory outcome was achieved.

This report describes a patient with severe high angle class II malocclusion and mandibular retrusion in whom surgical orthodontic treatment to prevent an increase in ramus height resulted in a significant improvement in esthetics and long-term stability. The patient was a woman aged 30 years 5 months who presented with the chief complaint of maxillary protrusion. She had a convex facial type, a chin button on lip sealing, and a gummy smile. Cephalometric analysis revealed a normal maxilla anterior-posterior position, but significant mandibular retrusion with pronounced clockwise rotation. The anterior maxillary tooth axis was standard, but labially inclined in the mandible. Based on these findings, the diagnosis was skeletal class II high angle malocclusion and mandibular retrusion. The proposed treatment plan comprised 2-jaw surgery with premolar extraction. Le Fort I osteotomy, in particular, was planned in the maxilla to move the ANS upward by 3.0 mm and the PNS downward by 3.0 mm. Sagittal split ramus osteotomy (SSRO) was planned to adjust the mandible and move the mandible forward by 10.0 mm. To prevent postoperative relapse, the short lingual split method was used in performing the SSRO. The mandible was split to minimize stretching of the median pterygoid muscle. Postoperatively, the ANS, PNS, and pogonion showed movement of 2.0 mm upward, 3.0 mm downward, and 8.0 mm forward, respectively. Additionally, lip closure was now natural, and the gummy smile had markedly improved. At 6 years postoperatively, there has been no change skeletally or dentally. Follow-up is being continued to monitor further progress.

This case report describes the unusual choice of extraction of maxillary incisors with short roots as part of an orthodontic treatment plan. The patient was a 20-year-old woman referred to our department in whom the diagnosis was maxillary protrusion and open bite. Both of the maxillary central incisors had short roots. Two treatment options were considered. The first involved extraction of the 4 first premolars with the aim of improving dentoalveolar protrusion and crowding. If preservation of the central incisors subsequently became difficult due to root resorption, prosthetic options were to be considered. The second treatment option involved extraction of the maxillary central incisors with short roots and the mandibular first premolars. The second treatment option was selected as survival of the central incisors following orthodontic movement was uncertain and the patient also wanted to minimize the risk of future extractions and the use of prosthetics. Active treatment was performed over a span of 31 months, and circumferential type retainers were used on both arches for retention. For such treatment to be successful, careful diagnosis and orthodontic treatment planning must be taken to ensure the anterior dental esthetics are properly restored.

The aim of this study was to investigate 3-dimensional (3D) airway volume in patients with unilateral cleft lip and palate (UCLP) using computed tomography (CT). The study population comprised 15 UCLP patients (UCLP group) scheduled to receive alveolar bone grafts and 15 with impacted teeth (control group). The clinical requirements for a CT scan were met in both groups. Measurements were recorded from 3D reconstructions of Digital Imaging and Communications in Medicine data obtained from the CT images. Airway volume, cross-sectional area, and linear and angular measurements were recorded. Airway volume and cross-sectional area showed no significant difference between the two groups. The narrowest section of the airway in the UCLP group was tighter than that in the control group, however (p=0.017). The results of this study suggest that this difference in the measurements of the narrowest section of the airway is involved in the particular maxillofacial morphology found in UCLP patients.

Here, we report retention following surgical orthodontic treatment in a patient with vertical maxillary excess associated with temporomandibular joint osteoarthritis (TMJOA) and marked mandibular retrusion. The patient was a man aged 20 years 10 months who presented with the chief complaint of maxillary protrusion. The facial profile was of the convex type due to marked mandibular retrusion. In addition, the patient had a gummy smile. Intraoral findings revealed a Class II molar relation, +11 mm overjet, and 0 mm overbite. Mandibular dentition arch length discrepancy showed crowding of -2 mm, and the maxillary dentition showed a spaced arch of +5 mm. Panoramic radiographs confirmed flattening of the condylar head and proliferation of the bone margin. Cephalometric analysis of the skeletal pattern revealed that, horizontally, the maxilla was anterior and the mandible posterior; vertically, a dolichofacial pattern was noted. The anterior maxillary tooth axis was standard, but the anterior mandibular tooth axis showed labial inclination. Based on these findings, skeletal maxillary protrusion associated with TMJOA was diagnosed. Surgical orthodontic treatment comprised bilateral mandibular first premolar extraction with two-jaw surgery and genioplasty. Orthodontic treatment was performed with a multibracket system using a 0.22-slot pre-adjusted edgewise appliance. At 2 years and 11 months after initiation of treatment, the maxilla was transposed 6 mm upwards by orthognathic surgery and the mandible 17 mm anteriorly and 5 mm upwards by counterclockwise rotation. At 3 years and 10 months, the Pogonion was moved 6 mm anteriorly by genioplasty. At 4 years, orthodontic treatment was concluded on confirming satisfactory occlusion and improvement in facial features. At 2 years after completion of treatment, occlusion and the maxillofacial morphology remain stable, with almost no relapse. In addition, no temporomandibular joint disorder symptoms have occurred. Careful comprehensive follow-up observation will be continued.

Here, we report a case of dental implant treatment involving computer-assisted surgery for bilateral agenesis of the maxillary lateral incisors. The patient was a 39-year-old woman with the chief complaint of functional and esthetic disturbance due to maxillary and mandibular malocclusion. The treatment plan comprised non-extraction comprehensive orthodontic treatment and prosthodontic treatment for space due to the absence of bilateral maxillary lateral incisors. A preliminary examination revealed that the mesiodistal spaces left by the absent bilateral maxillary lateral incisors were too narrow for implant placement (right, 5.49 mm; left, 5.51 mm). Additional orthodontic treatment increased these spaces to approximately 6 mm, the minimum required for implant placement if risk of damage to the adjacent teeth due to inaccuracies in directionality of drilling is to be avoided. For dental implant treatment with computer-assisted surgery, preoperative planning/simulation was performed using Simplant ® ver.12 software and a toothsupported surgical template fabricated using stereolithography. Two narrow-diameter implants were placed in a two-stage procedure. It was confirmed that there was sufficient distance between the implant fixtures and the roots of the adjacent teeth, together with no exposure of alveolar bone. Following a 4-month non-loading period, second-stage surgery and provisional restoration with a temporary screw-retained implant crown were performed. Cement-retained superstructures made of customized zirconia abutment and a zirconia-bonded ceramic crown were fitted as the final restoration. At 5 years after implant surgery, there were no complications, including inflammation of the peri-implant soft tissue and resorption of peri-implant bone. Computer-assisted implant surgery is useful in avoiding complications in bilateral agenesis of the maxillary lateral incisors when only a narrow mesiodistal space is available for implant placement.

Surgical orthodontic treatment has been reported to improve oral health-related quality of life (OHRQL). Such treatment comprises three stages: pre-surgical orthodontic treatment; orthognathic surgery; and post-surgical orthodontic treatment. Most studies have focused on change in OHRQL between before and after surgery. However, it is also necessary to evaluate OHRQL at the pre-surgical orthodontic treatment stage, as it may be negatively affected by dental decompensation compared with at pre-treatment. The purpose of this prospective study was to investigate the influence of surgical orthodontic treatment on QOL by assessing change in condition-specific QOL at each stage of treatment in skeletal class III cases. Twenty skeletal class III patients requiring surgical orthodontic treatment were enrolled in the study. Each patient completed the Orthognathic Quality of Life Questionnaire (OQLQ), which was developed for patients with dentofacial deformity. Its items are grouped into 4 domains: "social aspects of dentofacial deformity"; "facial esthetics"; "oral function"; and "awareness of dentofacial esthetics". The questionnaire was completed at the pre-treatment, pre-surgical orthodontic treatment, and post-surgical orthodontic treatment stages. The results revealed a significant worsening in scores between at pre-treatment and pre-surgical orthodontic treatment in the domains of facial esthetics and oral function (p<0.01), and between at pre-surgical orthodontic and post-surgical orthodontic treatment in all domains except awareness of dentofacial esthetics (p<0.05, p<0.01). A significant correlation was observed between a negative change in overjet and worsening OQLQ scores at the pre-surgical orthodontic treatment stage. Significant correlations were also observed between improvement in upper and lower lip difference, soft tissue pogonion protrusion, and ANB angle and improvement in OQLQ scores at the post-surgical orthodontic treatment stage. These results indicate that morphologic change influences OHRQL in patients undergoing surgical orthodontic treatment not only after surgery, but also during pre-surgical orthodontic treatment.

We performed orthodontic treatment, fitted prostheses, and provided restorative treatment in a patient with Bloch-Sulzberger syndrome and cleft lip and palate during the early mixed dentition period. We report the case after a subsequent 6-year retention phase including the period of pubertal growth. A girl aged 8 years 4 months visited our hospital with the chief complaint of crowding of the anterior teeth and anterior crossbite. She had bilateral cleft lip, alveolus, and palate; a Class II molar relationship; winging of both the maxillary bilateral central incisors; and spacing in the mandibular anterior teeth arches. Anterior crossbite comprised 0 mm overbite and -1 mm overjet. The crown diameter was at least one standard deviation smaller than normal in both the deciduous and permanent teeth, and the crowns were slightly peg-shaped. Panoramic radiograph confirmed congenital absence of 21 permanent teeth. Cephalometric analysis revealed poor growth of the maxilla, downward growth of the mandible, and lingual inclination of the maxillary central incisors. The diagnosis was skeletal anterior crossbite with cleft lip, alveolus, and palate, accompanied by hypodontia. Orthodontic treatment comprised an edgewise appliance and an expansion arch to improve crowding and anterior crossbite. The appliance was removed 2 years after treatment initiation, followed by crown restorations of the maxillary central incisors and mandibular deciduous anterior teeth. A metal retainer was then fitted to the maxillary dentition. She was subsequently placed in a 6-year retention phase including pubertal growth, during which occlusal stability and esthetics were maintained.

Brodie bite is a comparatively rare type of malocclusion found in primary and mixed dentition. It not only adversely affects chewing and muscle functions, but also impairs normal growth and development of the mandible. This report describes the therapeutic results of a patient with bilateral Brodie bite in early mixed dentition after using a bonded constriction quad-helix appliance. The patient, a boy aged 9 years and 2 months, first visited our hospital after occlusal abnormality in the molar region was detected at a local dental clinic. Case analysis resulted in a diagnosis of bilateral Brodie bite with slight mandibular retrognathism. Treatment objectives were to reduce the arch width of the maxillary dentition and expand the mandibular arch in order to establish and stabilize molar occlusion and to achieve a Class I molar relation and appropriate overbite and overjet. Treatment comprised covering the occlusal surface of the maxillary molars with resin and attaching a bonded constriction quad-helix appliance joined with a 0.040-inch quad-helix wire. A bi-helix appliance was also fixed to the mandibular dentition. Brodie bite visibly improved after 5 months. Cervical headgear was then fitted and the patient observed until eruption of the permanent dentition was complete. Class I molar relation was achieved after 2 years and 6 months, although spacing remained in the maxillary and mandibular dentitions. Treatment of bilateral Brodie bite in mixed dentition by means of a bonded constriction quad-helix appliance attached to the maxillary dentition enabled effective bite opening and reduction in the width of maxillary arch independent of the patient's cooperation, providing good therapeutic outcome in a short time period.