Search

Verifying and validating explosion-resistant design models are challenging tasks due to the difficulties in accurately capturing the failure evolution within a setup influenced by the combined effects of fluid–solid interactions (FSI), blast waves, fragmentation, and impact. Curtain wall system, as a key structural component, is widely used in various types of buildings for its aesthetic appeal and weather protection. Hence, optimizing the explosion-resistance of such systems is necessary to improve building safety. In this work, we develop computational procedures that can be used to enhance the design of blast-resistant structures. This paper focuses on studying a representative component (e.g., window panels) from a typical curtain wall system, as well as a small-scale modeling of shock tube testing. For that, the material point method (MPM) simulations are verified against the finite element method (FEM) simulations, and the computational results are validated against shock tube testing. The work objective is to evaluate the simulation fidelity of explosion responses in several case studies. The first case study demonstrates how the MPM captures damage and fragmentation in a typical confined explosion event involving FSI, thus, providing an improved physical description compared to the FEM. The second case study qualitatively compares the MPM’s ability to simulate the shock tube response with experimental observations. Since the second study validates that the MPM solution is qualitatively consistent with the experimental data, the MPM model is then used in the third case study to establish an FEM model that could capture the same physics. This FEM model can be scaled up to model field experiments. The fourth case study involves the development of an FEM model for a representative curtain wall system component, which is validated against experimental results and then scaled down and employed to validate a corresponding MPM model. The proposed procedure provides a feasible approach to verifying and validating explosion-resistant designs for more general cases.

Laminated glass (LG) windows significantly enhance building safety due to their ability to retain shattered glass within the interlayer, but their susceptibility to failure under blast loading remains a concern. Compared with simplified models, detailed constitutive modeling is essential to evaluate these complex scenarios, as experimental investigation faces limitations in spatial and temporal resolutions. This study presents a robust model-based simulation approach for predicting the brittle failure response of glass in blast-resistant LG windows. An elasto-damage relation for glass (EDG) was integrated with the finite element model (FEM) to predict the blast response. Validation against shock tube testing results was performed to ensure the reliability of the FEM. Material parameters for the polymeric interlayer were obtained through dynamic experiments, enabling a reasonable representation of its constitutive behavior using the Johnson–Cook (JC) model. Additionally, a numerical parametric study was conducted to investigate how different glass types influence blast resistance performance. Tempered glass stood out for its blast resistance compared with annealed and heat-strengthened glass, displaying superior strength against blast loads. The Rankine-based elasto-damage description provides a more precise representation of the failure response than commonly used approaches. These findings contribute to advancing model-based simulation approaches for designing better blast-resistant LG windows, ensuring safer buildings.

Carbon fiber-reinforced polymer (CFRP) has many advantages as a construction/structural-strengthening material. However, there are still concerns regarding the long-term performance of these materials when used with reinforced concrete (RC) structures. Environmental conditions have an adverse effect on the behavior of CFRP and the bond between these sheets and concrete. Therefore, the durability of CFRP used for strengthening RC beams was evaluated under different environmental scenarios, including subjection to immersion in deicing agents, tap water, and saltwater, freeze-and-thaw cycles, and outdoor environmental changes. Laboratory tests were performed to examine the influence of these environmental scenarios on the bonding behavior between CFRP sheets and concrete in terms of deformations and modes of failure. Two types of test setups were performed in this study, namely pull-off shearing and three-point bending. Forty-two concrete prisms with CFRP were prepared and tested by using the pull-off shearing setup. It was observed that as the period of exposure increased, noticeable effects on the CFRP sheet as well as the bond stiffness were observed. Exposure to tap water had a greater impact than saltwater on the CFRP–concrete bond strength as well as the CFRP. In addition, eighteen notched concrete beams strengthened with an external CFRP were tested under three-point bending. The tap water exposure showed a 3.6% increase in the bond strength compared to the control specimen. However, the saltwater exposure showed a 10% increase.

Pre-stressed steel-concrete composite beams are widely used in bridges around the world. Loads during the service life of bridges may cause failure in the form of fracture in the studs near the ends of the bridge girders. The effect of stud failure on the residual static capacity and residual fatigue life of composite girders is not well investigated. Therefore, this study presents numerical investigations into the effects of the progressive failure of stud shear connectors on the residual static performance and remaining fatigue life of post-tensioned steel-concrete composite beams. The Finite Element (FE) model was validated using existing experimental work. Moreover, the effects of the progressive failure of stud shear connectors on the steel-concrete interface slippage, shear stress range, and compressive and tensile strains were investigated. The behavior of the composite girders in terms of the estimated fatigue life and residual capacity was inversely affected by the number of fractured studs. The AASHTO theoretical equation conservatively estimated the remaining fatigue life until 15% of the rows were removed and then the FE model predicted fewer remaining fatigue cycles than the theoretical equation. Until 15% of the rows were removed, the strengthened sample had a better response in terms of the stress range, tensile and compressive strains, and residual capacity. After that, both the strengthened and non-strengthened samples exhibited similar responses to the failure of studs. Subsequently, the positive effects of the post-tensioning vanish as the end studs fail. Therefore, designers should pay special attention to the ends of post-tensioned composite beams where the local failure of studs is expected.