Search

A sustainable HPTLC-densitometric method was developed for quantitative determination of Quetiapine (QUET), Levodopa (LD) and Carbidopa (CD) in presence of Dopamine (DOP) as an internal standard. This applicable technique was achieved by spiking human plasma and extraction was performed using the protein precipitation approach. The mobile phase used was acetone, dichloromethane, n-butanol, glacial acetic acid and water (3: 2.5: 2: 2: 1.75, by volume). Method validation was done according to US-FDA guidelines and was able to quantify Quetiapine, Levodopa and Carbidopa in the ranges of 100–4000, 200–8000 and 30–1300 ng/mL, respectively. Bioanalytical method validation parameters were assessed for the studied drugs. Finally, the analytical suggested methodology was evaluated using various green and white analytical chemistry metrics and other tools, such as the green solvent selection tool, analytical eco-scale, green analytical procedure index, analytical greenness metric approach and the red–green–blue algorithm tool. The results revealed that the applied analytical method had a minor impact on the environment and is a relatively greener option than other previously reported chromatographic methods. [ABSTRACT FROM AUTHOR]

The rapid uprising technologies of smartphone applications and software introduced a new era for analytical detection techniques. It has transformed bench-top laboratory methods into simpler ones depending on cost-effective, portable, and widely accessible devices. In this work, two high performance thin layer chromatographic (HPTLC) methods were developed based on smartphone's camera detection and either ImageJ desktop software or Color-Picker smartphone's application as alternative techniques to conventional densitometric detection. A mixture of Naltrexone hydrochloride (NAL) and Bupropion hydrochloride (BUP) was chromatographed on HPTLC- plates using ethyl acetate, methanol, acetone, and glacial acetic acid (3:6:1:0.5, by volume) as a developing system. The developed plates were scanned at 203 nm for the densitometric analysis, then visualized by modified Dragendorff's reagent and shot by a smartphone's camera. The captured images were uploaded to either ImageJ software or Color-Picker application to detect the separated spots. The results derived from the three detection methods were compared over the concentration range of 0.4–24 & 0.6–18 µg/band for the densitometric method, 0.4–24 & 2–24 µg/band for ImageJ built method and 0.8–20 & 5–20 µg/band for Color Picker built method for NAL and BUP, respectively. The methods were found to be appropriate for assaying both active drug substances in pure forms and combined in marketed pharmaceutical formulations. The excellent sustainability of densitometric and ImageJ-based methods enabled also the assessment of their dosage form content uniformity. The greenness and sustainability of the methods were assessed by three metric tools, namely Green Analytical Procedure Index (GAPI), Analytical GREEnness Metric Approach (AGREE), and White Analytical Chemistry (WAC). The assessments results confirmed the sustainability and superiority of the proposed methods in terms of sample treatment, waste mount, energy consumption, cost, and number of analyzed samples per an hour. [ABSTRACT FROM AUTHOR]

Two rapid, precise, and sensitive stability-indicating high performance chromatographic methods for the measurement of Teriflunomide in its degradation products' existence were developed. These were RP-HPLC and HPTLC using UV detector. HPLC separation was accomplished utilizing Thermo BDS hypercil C18 column (250 × 4.6 mm, 5 μm) and acetonitrile: 0.03 M potassium dihydrogen phosphate: triethylamine (50:50:0.1%, by volume) as mobile phase at flow rate of 1mL/min. The separated peaks were detected at 250.0 nm. The densitometric approach was conducted utilizing HPTLC 60 F254 silica gel plates, and a developing system of benzene: ethanol: acetic acid (7.5:1:0.25, by volume) and detection was done at 250.0 nm. The developed approaches were evaluated regarding the International Conference on Harmonization (ICH) instructions. The calibration curves of both techniques were constructed with linearity ranges of (5-100) µg/mL and (2–10) µg /band, for HPLC and densitometric determination, consecutively. Teriflunomide was exposed to base and acid hydrolysis, oxidation using H2O2 and finally, thermal degradation as stated in ICH guidelines. The degradation product structures' elucidation was achieved through LC-MS. [ABSTRACT FROM AUTHOR]

Preserving the environment, reducing the amount of waste resulting from chemical trials, and reducing the amount of energy consumed have currently become a pivotal global trend. An analytical quality by design (AQbD) based eco-friendly TLC-densitometric method was implemented for quantifying two antihypertensive agents, captopril (CPL) and hydrochlorothiazide (HCZ), along with their impurities; captopril disulphide (CDS), chlorothiazide (CTZ) and salamide (SMD). The analytical target profile (ATP) was first identified, followed by selecting the critical analytical attributes (CAAs), such as retardation factors and resolution between the separated peaks. Critical method parameters (CMPs) that may have a crucial influence on CAAs were identified and emanated through the quality risk assessment phase. A literature survey-based preliminary studies were performed, followed by optimization of the selected CMPs through a custom experimental design to attain the highest resolution with optimum retardation factors. Moreover, method robustness was also tested by testing the design space. Complete separation of the drugs and their impurities was achieved using ethyl acetate: glacial acetic acid (6: 0.6, v/v) as a developing system applied to a 12 cm length TLC plate at room temperature with UV scanning at 215 nm. Calibration graphs were found to be linear in the ranges of (0.70–6.00), (0.10–2.00), (0.20–1.00), (0.07–1.50) and (0.05–1.00) µg/band corresponding to CPL, HCZ, CDS, CTZ, and SMD, respectively. Four different green metric tools were used to evaluate the greenness profile of the proposed method, and results showed that it is greener than the reported HPLC method. Method whiteness assessment was also conducted. Moreover, the method performance was evaluated following the ICH guidelines, and the outcomes fell within the acceptable limits. The developed method could be approved for routine assay of the cited components in their pharmaceutical formulations and bulk powder without interference from the reported impurities. The issue of concern is saving money, especially in developing countries. Highlights: A combination of hydrochlorothiazide and captopril is used in treating patients not adequately controlled with monotherapy. The AQbD approach was used to develop the TLC- densitometric method to reduce the number of trials, solvent consumption, and waste production. Increasing global attention for considering GAC principles in developing analytical methods; therefore, different green metric tools were implemented for the assessment of the greenness profile of the proposed and reported methods. Integration between the AQbD and GAC principles was performed to develop a greener, more time- and money-saving method. Whiteness assessment was conducted to evaluate method performance and perform a comparative study between the developed method and the reported ones. [ABSTRACT FROM AUTHOR]