Search

Background The current production of bioethanol based on lignocellulosic biomass (LCB) highly depends on thermostable enzymes and extremophiles owing to less risk of contamination. Thermophilic bacterial cellulases are preferred over fungi due to their higher growth rate, presence of complex multi-enzymes, stability, and enhanced bioconversion efficiency. Corncob, underutilized biomass, ensures energy conservation due to high lignocellulosic and more fermentable sugar content. In the present study, the thermophilic bacterium Bacillus aerius CMCPS1, isolated from the thermal springs of Manikaran, Himachal Pradesh, India, was characterized in terms of its activity, stability, and hydrolytic capacity. A two-step process comprising: (i) a combined strategy of hydrodynamic cavitation reaction (HCR)-coupled enzymatic (LccH at 6.5 U) pretreatment for delignification and (ii) subsequent hydrolysis of pre-treated (HCR-LccH) corncob biomass (CCB) using a thermostable cocktail of CMCPS1 was adopted to validate the efficiency of the process. Some of the parameters studied include lignin reduction, cellulose increase, and saccharification efficiency. Result Among the five isolates obtained by in situ enrichment on various substrates, B. aerius CMCPS1, isolated from hot springs, exhibited the maximum hydrolytic activity of 4.11. The GH activity of the CMCPS1 strain under submerged fermentation revealed maximum filter paper activity (FPA) and endoglucanase activity of 4.36 IU mL−1 and 2.98 IU mL−1, respectively, at 44 h. Similarly, the isolate produced exoglucanase and β-glucosidase with an activity of 1.76 IU mL−1 and 1.23 IU mL−1 at 48 h, respectively. More specifically, the enzyme endo-1,4-β-d glucanase E.C.3.2.1.4 (CMCase) produced by B. aerius CMCPS1 displayed wider stability to pH (3–9) and temperature (30–90 °C) than most fungal cellulases. Similarly, the activity of CMCase increased in the presence of organic solvents (118% at 30% acetone v/v). The partially purified CMCase from the culture supernatant of CMCPS1 registered 64% yield with twofold purification. The zymogram and SDS-PAGE analyses further confirmed the CMCase activity with an apparent molecular mass of 70 kDa. The presence of genes specific to cellulases, such as cellulose-binding domain CelB, confirmed the presence of GH family 46 and β-glucosidase activity (GH3). The multifunctional cellulases of CMCPS1 were evaluated for their saccharification efficiency on laccase (LccH, a fungal laccase from Hexagonia hirta MSF2)-pretreated corncob in a HCR. The lignin and hemicelluloses removal efficiency of HCR-LccH was 54.1 and 6.57%, respectively, with an increase in cellulose fraction (42.25%). The saccharification efficiency of 55% was achieved with CMCPS1 multifunctional cellulases at 50 °C and pH 5.0. Conclusion The multifunctional cellulase complex of B. aerius CMCPS1 is a potential biocatalyst for application in lignocellulosic biomass-based biorefineries. The saccharification ability of HCR-LccH-pretreated corncob at elevated temperatures would be an advantage for biofuel production from lignocellulosic biomass.

Background Without sufficient alternatives to crude oil, as demand continues to rise, the global economy will undergo a drastic decline as oil prices explode. Dependence on crude oil and growing environmental impairment must eventually be overcome by creating a sustainable and profitable alternative based on renewable and accessible feedstock. One of the promising solutions for the current and near-future is the substitution of fossil fuels with sustainable liquid feedstock for biofuel production. Among the different renewable liquid feedstock’s studied, wastewater is the least explored one for biodiesel production. Sago wastewater is the byproduct of the cassava processing industry and has starch content ranging from 4 to 7%. The present investigation was aimed to produce microbial lipids from oleaginous yeast, Candida tropicalis ASY2 for use as biodiesel feedstock and simultaneously decontaminate the sago processing wastewater for reuse. Initial screening of oleaginous yeast to find an efficient amylolytic with maximum lipid productivity resulted in a potent oleaginous yeast strain, C. tropicalis ASY2, that utilizes SWW as a substrate. Shake flask experiments are conducted over a fermentation time of 240 h to determine a suitable fatty acid composition using GC-FID for biodiesel production with simultaneous removal of SWW pollutants using ASY2. Results The maximum biomass of 0.021 g L−1 h−1 and lipid productivity of 0.010 g L−1 h−1 was recorded in SWW with lipid content of 49%. The yeast strain degraded cyanide in SWW (79%) and also removed chemical oxygen demand (COD), biological oxygen demand (BOD), nitrate (NO3), ammoniacal (NH4), and phosphate (PO4) ions (84%, 92%, 100%, 98%, and 85%, respectively). GC-FID analysis of fatty acid methyl esters (FAME) revealed high oleic acid content (41.33%), which is one of the primary fatty acids for biodiesel production. Conclusions It is evident that the present study provides an innovative and ecologically sustainable technology that generates valuable fuel, biodiesel using SWW as a substrate and decontaminates for reuse.

Background Renewable liquid biofuel production will reduce crude oil import of India. To displace the huge quantity of fossil fuels used for energy production, this research was focused on utilization of unexploited low-cost agricultural residues for biofuel production. Corncobs are a byproduct of corn processing industry, and till now it is not utilized for biofuel production, eventhough it has high lignocellulosic concent. In this study, combined hydrodynamic cavitation and enzymatic (HCE) method was evaluated as a pretreatment method of corncob for biofuel production. The most significant process parameters namely (i) enzyme loading (3–10 U g−1), (ii) biomass loading (2.5–5.0%), and (iii) duration (5–60 min) were optimized and their effects on combined HCE pretreatment of corncob was studied through response surface methodology for lignin reduction, hemicellulose reduction and cellulose increase. Results The highest lignin reduction (47.4%) was obtained in orifice plate 1 (OP1) under the optimized conditions namely biomass loading at 5%, enzyme loading at 6.5 U g−1 of biomass, and reaction duration of 60 min. The above tested independent variables had a significant effect on lignin reduction. The cavitational yield and energy consumption under the above-mentioned optimized conditions for OP1 was 3.56 × 10−5 g J−1 and 1.35 MJ kg−1, respectively. Conclusions It is evident from the study that HCE is an effective technology and requires less energy (1.35 MJ kg−1) than other biomass pretreatment methods. Electronic supplementary material The online version of this article (10.1186/s13068-018-1204-y) contains supplementary material, which is available to authorized users.