Search

Detergent-mediated virus inactivation (VI) provides a valuable orthogonal strategy for viral clearance in mammalian processes, in particular for next-generation continuous manufacturing. Furthermore, there exists an industry-wide need to replace the conventionally employed detergent Triton X-100 with eco-friendly alternatives. However, given Triton X-100 has been the gold standard for VI due its minimal impact on protein stability and high inactivation efficacy, inactivation by other eco-friendly detergents and its impact on protein stability is not well understood. In this study, the sugar-based detergent commonly used in membrane protein purification, n-dodecyl-β- d-maltoside was found to be a promising alternative for VI. We investigated a panel of detergents to compare the relative VI efficacy, impact on therapeutic quality attributes, and clearance of the VI agent and other impurities through subsequent chromatographic steps. Detergent-mediated inactivation and protein stability showed comparable trends to low pH inactivation. Using experimental and modeling data, we found detergent-mediated product aggregation and its kinetics to be driven by extrinsic factors such as detergent and protein concentration. Detergent-mediated aggregation was also impacted by an initial aggregation level as well as intrinsic factors such as the protein sequence and detergent hydrophobicity, and critical micelle concentration. Knowledge gained here on factors driving product stability and VI provides valuable insight to design, standardize, and optimize conditions (concentration and duration of inactivation) for screening of detergent-mediated VI., (© 2022 Wiley Periodicals LLC.)

Process analytical technology (PAT) is a fast-growing field within bioprocessing that enables innovation in biological drug manufacturing. This study demonstrates novel PAT methods for monitoring multiple quality attributes simultaneously during the ultrafiltration and diafiltration (UF/DF) process operation, the final step of monoclonal antibody (mAb) purification. Size exclusion chromatography (SEC) methods were developed to measure excipients arginine, histidine, and high molecular weight (HMW) species using a liquid chromatography (LC) system with autosampler for both on-line and at-line PAT modes. The methods were applied in UF/DF studies for the comparison of single-use tangential flow filtration (TFF) cassettes to standard reusable cassettes to achieve very high concentration mAb drug substance (DS) in the order of 100-200 g/L. These case studies demonstrated that single-use TFF cassettes are a functionally equivalent, low-cost alternative to standard reusable cassettes, and that the on-line PAT measurement of purity and excipient concentration was comparable to orthogonal offline methods. These PAT applications using an on-line LC system equipped with onboard sample dilution can become a platform system for monitoring of multiple attributes over a wide dynamic range, a potentially valuable tool for biological drug development and manufacturing., (© 2021 Wiley Periodicals LLC.)

Technologies capable of monitoring product quality attributes and process parameters in real time are becoming popular due to the endorsement of regulatory agencies and also to support the agile development of biotherapeutic pipelines. The utility of vibrational spectroscopic techniques such as Fourier transform mid-infrared (Mid-IR) and multivariate data analysis (MVDA) models allows the prediction of multiple critical attributes simultaneously in real time. This study reports the use of Mid-IR and MVDA model sensors for monitoring of multiple attributes (excipients and protein concentrations) in real time (measurement frequency of every 40 s) at ultrafiltration and diafiltration (UF/DF) unit operation of biologics manufacturing. The platform features integration of fiber optic Mid-IR probe sensors to UF/DF set up at the bulk solution and through a flow cell at the retentate line followed by automated Mid-IR data piping into a process monitoring software platform with pre-loaded partial least square regression (PLS) chemometric models. Data visualization infrastructure is also built-in to the platform so that upon automated PLS prediction of excipients and protein concentrations, the results were projected in a graphical or numerical format in real time. The Mid-IR predicted concentrations of excipients and protein show excellent correlation with the offline measurements by traditional analytical methods. Absolute percent difference values between Mid-IR predicted results and offline reference assay results were ≤5% across all the excipients and the protein of interest; which shows a great promise as a reliable process analytical technology tool., (© 2020 Wiley Periodicals LLC.)

To achieve the high protein concentrations required for subcutaneous administration of biologic therapeutics, numerous manufacturing process challenges are often encountered. From an operational perspective, high protein concentrations result in highly viscous solutions, which can cause pressure increases during ultrafiltration. This can also lead to low flux during ultrafiltration and sterile filtration, resulting in long processing times. In addition, there is a greater risk of product loss from the hold-up volumes during filtration operations. From a formulation perspective, higher protein concentrations present the risk of higher aggregation rates as the closer proximity of the constituent species results in stronger attractive intermolecular interactions and higher frequency of self-association events. There are also challenges in achieving pH and excipient concentration targets in the ultrafiltration/diafiltration (UF/DF) step due to volume exclusion and Donnan equilibrium effects, which are exacerbated at higher protein concentrations. This paper highlights strategies to address these challenges, including the use of viscosity-lowering excipients, appropriate selection of UF/DF cassettes with modified membranes and/or improved flow channel design, and increased understanding of pH and excipient behavior during UF/DF. Additional considerations for high-concentration drug substance manufacturing, such as appearance attributes, stability, and freezing and handling are also discussed. These strategies can be employed to overcome the manufacturing process challenges and streamline process development efforts for high-concentration drug substance manufacturing., (© 2020 Wiley Periodicals LLC.)

A library of cold shock protein B (CspB) mutant variants was employed to study protein binding affinity and preferred orientations in cation exchange chromatography. Single site mutations introduced at charged amino acids on the protein surface resulted in a homologous protein set with varying charge density and distribution. The retention times of the mutants varied significantly during linear gradient chromatography. While the expected trends were observed with increasing or decreasing positive charge on the protein surface, the degree of change was a strong function of the location and microenvironment of the mutated amino acid. Quantitative structure-property relationship (QSPR) models were generated using a support vector regression technique that was able to give good predictions of the retention times of the various mutants. Molecular descriptors selected during model generation were used to elucidate the factors affecting protein retention. Electrostatic potential maps were also employed to provide insight into the effects of protein surface topography, charge density and charge distribution on protein binding affinity and possible preferred binding orientations. The use of this protein mutant library in concert with the qualitative and quantitative analyses presented in the article provides an improved understanding of protein behavior in ion exchange systems.