Search

The loss of carbon dioxide (CO

The development of mathematical models facilitates industrial (large-scale) application of solid-state fermentation (SSF). In this study, a two-phase model of a drum fermentor is developed that consists of a discrete particle model (solid phase) and a continuum model (gas phase). The continuum model describes the distribution of air in the bed injected via an aeration pipe. The discrete particle model describes the solid phase. In previous work, mixing during SSF was predicted with the discrete particle model, although mixing simulations were not carried out in the current work. Heat and mass transfer between the two phases and biomass growth were implemented in the two phase model. Validation experiments were conducted in a 28-dm(3) drum fermentor. In this fermentor, sufficient aeration was provided to control the temperatures near the optimum value for growth during the first 45-50 hours. Several simulations were also conducted for different fermentor scales. Forced aeration via a single pipe in the drum fermentors did not provide homogeneous cooling in the substrate bed. Due to large temperature gradients, biomass yield decreased severely with increasing size of the fermentor. Improvement of air distribution would be required to avoid the need for frequent mixing events, during which growth is hampered. From these results, it was concluded that the two-phase model developed is a powerful too] to investigate design and scale-up of aerated (mixed) SSF fermentors. (C) 2004 Wiley Periodicals, Inc.

Solid-state fermentation (SSF) is prone to process failure due to channeling caused by evaporative cooling and the formation of an interparticle mycelium network. Mixing is needed to break the mycelium network and to avoid such failure. This study presents the first attempt to quantify and predict the effect of mycelium bonds on particle mixing and vice versa. We developed a novel experimental set-up to measure the tensile strength of hyphal bonds in SSF: Aspergillus oryzae was cultivated between two wheat-dough disks and the tensile strength of the aerial mycelium was measured with a texture analyzer. Tensile strength at different incubation times was related to oxygen consumption, to allow a translation to a rotating drum with A. oryzae cultivated on wheat grain. We performed several discontinuously mixed solid-state fermentations in the drum fermentor and measured the number and size of grain-aggregates remaining after the first mixing action. We integrated data on mycelium tensile strength into a previously developed two-dimensional discrete-particle model that calculates forces acting on individual substrate particles and the resulting radial-particle movements. The discrete-particle model predicted the quantity and size of the aggregates remaining after mixing successfully. The results show that the first mixing event in SSF with A. oryzae is needed to break mycelium to avoid aggregate formation in the grain bed, and not to distribute water added to compensate for evaporation losses, or smooth out temperature gradients.

Oxygen transfer is for two reasons a major concern in scale-up and process control in industrial application of aerobic fungal solid-state fermentation (SSF): 1) heat production is proportional to oxygen uptake and it is well known that heat removal is one of the main problems in scaled-up fermenters, and 2) oxygen supply to the mycelium on the surface of or inside the substrate particles may be hampered by diffusion limitation. This article gives the first experimental evidence that aerial hyphae are important for fungal respiration in SSF. In cultures of A. oryzae on a wheat-flour model substrate, aerial hyphae contributed up to 75% of the oxygen uptake rate by the fungus. This is due to the fact that A. oryzae forms very abundant aerial mycelium and diffusion of oxygen in the gas-filled pores of the aerial hyphae layer is rapid. It means that diffusion limitation in the densely packed mycelium layer that is formed closer to the substrate surface and that has liquid-filled pores is much less important for A. oryzae than was previously reported for R. oligosporus and C. minitans. It also means that the overall oxygen uptake rate for A. oryzae is much higher than the oxygen uptake rate that can be predicted in the densely packed mycelium layer for R. oligosporus and C. minitans. This would imply that cooling problems become more pronounced. Therefore, it is very important to clarify the physiological role of aerial hyphae in SSF.

Gradients inside substrate particles cannot be prevented in solid-state fermentation. These gradients can have a strong effect on the physiology of the microorganisms but have hitherto received little attention in experimental studies. We report gradients in moisture and glucose content during cultivation of Aspergillus oryzae on membrane-covered wheat-dough slices that were calculated from (1)H-NMR images. We found that moisture gradients in the solid substrate remain small when evaporation is minimized. This is corroborated by predictions of a diffusion model. In contrast, strong glucose gradients developed. Glucose concentrations just below the fungal mat remained low due to high glucose uptake rates, but deeper in the matrix glucose accumulated to very high levels. Integration of the glucose profile gave an average concentration close to the measured average content. On the basis of published data, we expect that the glucose levels in the matrix cause a strong decrease in water activity. The results demonstrate that NMR can play an important role in quantitative analysis of water and glucose gradients at the particle level during solid-state fermentation, which is needed to improve our understanding of the response of fungi to this nonconventional fermentation environment.

A soft-sphere discrete particle model was used to simulate mixing behavior of solid substrate particles in a slow rotating drum for solid-state fermentation. In this approach, forces acting on and subsequent motion of individual particles can be predicted. The (2D) simulations were qualitatively and quantitatively validated by mixing experiments using video and image analysis techniques. It was found that the simulations successfully predicted the mixing progress as a function of the degree of filling and size of the drum. It is shown that only relatively large, straight baffles perpendicular to the drum wall (67% of the drum radius) increase the mixing performance of the rotating drum. Considering the different aspects of mixing dealt with in this work, it is concluded that the soft sphere discrete particle model can serve as a valuable tool for investigating mixing of solid substrate particles. Finally, it is expected that this model may evolve into a potential tool for design and scale-up of mixed solid-state fermenters. © 2001 John Wiley & Sons, Inc.

We have validated our previously described model for scale-up of packed-bed solid-state fermenters (Weber et al., 1999) with experiments in an adiabatic 15-dm(3) packed-bed reactor, using the fungi Coniothyrium minitans and Aspergillus oryzae. Effects of temperature on respiration, growth, and sporulation of the biocontrol fungus C. minitans on hemp impregnated with a liquid medium were determined in independent experiments, and the first two effects were translated into a kinetic model, which was incorporated in the material and energy balances of the packed-bed model. Predicted temperatures corresponded well with experimental results. As predicted, large amounts of water were lost due to evaporative cooling. With hemp as support no shrinkage was observed, and temperatures could be adequately controlled, both with C. minitans and A. oryzae. In experiments with grains, strong shrinkage of the grains was expected and observed. Nevertheless, cultivation of C. minitans on oats succeeded because this fungus did not form a tight hyphal network between the grains. However, cultivation of A. oryzae failed because shrinkage combined with the strong hyphal network formed by this fungus resulted in channeling, local overheating of the bed, and very inhomogeneous growth of the fungus. For cultivation of C. minitans on oats and for cultivation of A. oryzae on wheat and hemp, no kinetic models were available. Nevertheless, the enthalpy and water balances gave accurate temperature predictions when online measurements of oxygen consumption were used as input. The current model can be improved by incorporation of (1) gas-solids water and heat transfer kinetics to account for deviations from equilibrium observed with fast-growing fungi such as A. oryzae, and (2) the dynamic response of the fungus to changes in temperature, which were neglected in the isothermal kinetic experiments.

A continuously mixed, aseptic paddle mixer was used successfully for solid-state fermentation (SSF) with Aspergillus oryzae on whole wheat kernels. Continuous mixing improved temperature control and prevented inhomogeneities in the bed. Respiration rates found in this system were comparable to those in small, isothermal, unmixed beds, which showed that continuous mixing did not cause serious damage to the fungus or the wheat kernels. Continuous mixing improves heat transport to the bioreactor wall, which reduces the need for evaporative cooling and thus may help to prevent the desiccation problems that hamper large-scale SSF. However, scale-up calculations for the paddle mixer indicated that wall cooling becomes insufficient at the 2-m(3) scale for a rapidly growing fungus like Aspergillus oryzae. Consequently, evaporative cooling will remain important in large-scale mixed systems. Experiments showed that water addition will be necessary when evaporative cooling is applied in order to maintain a sufficiently high water activity of the solid substrate. Mixing is necessary to ensure homogeneous water addition in SSF. Automated process control might be achieved using the enthalpy balance. The enthalpy balance for the case of evaporative cooling in the paddle mixer was validated. This work shows that continuous mixing provides promising possibilities for simultaneous control of temperature and moisture content in solid-state fermentation on a large scale.

In this study we describe a model that estimates the extracellular (nonfungal) and overall water contents of wheat grains during solid-state fermentation (SSF) with Aspergillus oryzae, using on-line measurements of oxygen, carbon dioxide, and water vapor in the gas phase. The model uses elemental balances to predict substrate dry matter losses from carbon dioxide measurements, and metabolic water production, water used in starch hydrolysis, and water incorporated in new biomass from oxygen measurements. Water losses caused by evaporation were calculated from water vapor measurements. Model parameters were determined using an experimental membrane-based model system, which mimicked the growth of A. oryzae on the wheat grains and permitted direct measurement of the fungal biomass dry weight and wet weight. The measured water content of the biomass depended heavily on the moisture content of the solid substrate and was significantly lower than the estimated values reported in the literature. The model accurately predicted the measured overall water content of fermenting solid substrate during fermentations performed in a 1.5-L scraped drum reactor and in a 35-L horizontal paddle mixer, and is therefore considered validated. The model can be used to calculate the water addition required to control the extracellular water content in a mixed solid-state bioreactor for cultivation of A. oryzae on wheat.