Search

The aim of this review was to generalize and analyze the features of acetone-butyl fermentation as a type of butyric acid fermentation in the process of obtaining butanol as an alternative biofuel. Methods. The methods of analysis and generalization of analytical information and literature sources were used in the review. The results were obtained using the following methods such as microbiological (morphological properties of strains), chromatographic (determination of solvent concentration), spectrophotometric (determination of bacterial concentration), and molecular genetic (phylogenetic analysis of strains). Results. The process of acetone-butyl fermentation was analyzed, the main producer strains were considered, the features of the relationship between alcohol formation and sporulation were described, the possibility of butanol obtaining from synthesis gas was shown, and the features of the industrial production of butanol were considered. Conclusions. The features of the mechanism of acetone-butyl fermentation (the relationships between alcohol formation and sporulation, the duration of the acid-forming and alcohol-forming stages during batch fermentation depending on the change in the concentration of H2, CO, partial pressure, organic acids and mineral additives) and obtaining an enrichment culture during the production of butanol as an alternative fuel were shown. The possibility of using synthesis gas as a substrate for reducing atmospheric emissions during the fermentation process was shown. The direction of increasing the productivity of butanol-producing strains to create a competitive industrial biofuel technology was proposed.

Aim. The purpose of the study was to investigate the effect of ultrasonic disintegration on the lignocellulosic raw materials (biomass of the non-cereal part of rape) with its subsequent use as a substrate for the production of biobutanol. Methods. Butanol-producing strains and the biomass of the non-cereal part of rape Brassica napus were used in the present study. Ultrasonic disintegration of lignocellulosic raw materials was performed on the specially designed equipment. Results. The effect of ultrasonic disintegration on lignocellulosic raw materials was investigated for further application in biofuel production based on microbiological conversion. The possibility of using the obtained components after the pre-treatment of lignocellulose by ultrasonic disintegration as a substrate for the microbiological synthesis of butanol was shown. The highest accumulation of butanol (2.4 g/l) was obtained with the use of 5% dry matter content in the medium, 5 min treatment and the specific power of ultrasonic disintegration of 0.72 W/ml. Conclusions. The possibility of producer strains of the genus Clostridium to use cellulose in the fermentation process has been shown. When using ultrasonic disintegration for pretreatment of the non-cereal part of the biomass of rape, the accumulation of butanol increased by 3 folds.

Aim. The purpose of the study was to investigate the effect of ultrasonic disintegration on the lignocellulosic raw materials (biomass of the non-cereal part of rape) with its subsequent use as a substrate for the production of biobutanol. Methods. Butanol-producing strains and the biomass of the non-cereal part of rape Brassica napus were used in the present study. Ultrasonic disintegration of lignocellulosic raw materials was performed on the specially designed equipment. Results. The effect of ultrasonic disintegration on lignocellulosic raw materials was investigated for further application in biofuel production based on microbiological conversion. The possibility of using the obtained components after the pre-treatment of lignocellulose by ultrasonic disintegration as a substrate for the microbiological synthesis of butanol was shown. The highest accumulation of butanol (2.4 g/l) was obtained with the use of 5% dry matter content in the medium, 5 min treatment and the specific power of ultrasonic disintegration of 0.72 W/ml. Conclusions. The possibility of producer strains of the genus Clostridium to use cellulose in the fermentation process has been shown. When using ultrasonic disintegration for pretreatment of the non-cereal part of the biomass of rape, the accumulation of butanol increased by 3 folds. [ABSTRACT FROM AUTHOR]

The aim of the work was to investigate the accumulation of butanol by Clostridium strain producers using meshed green rape biomass as substrate. The accumulation of butanol by producer strains was studied using rape as substrate in the doses of 5–30 g/l. The cells were precipitated in an ultracentrifuge, the supernatant was distilled, and fermentation products were determined. The presence of solvents in the culture fluid was determined by gas chromatography. The biggest accumulation of butanol was produced by the strain Clostridium sp. IMB B-7570 on 2.3 g/l mashed switchgrass biomass. The optimal inoculum concentration for maximum accumulation of butanol using switchgrass biomass was 10% of the volume of fermentation liquid. The greatest accumulation of butanol (2.9 g/l) was obtained in optimal culture conditions and at 10 g/l dry switchgrass biomass in the fermentation medium. Thus, the present study showed that mashed switchgrass biomass was assimilated by Clostridium sp. strains. The accumulation of butanol depended of Clostridium strain, the amount of inoculum, the concentration and degree of grinding of the substrate.

The aim of the research was to investigate the accumulation of biobutanol by strains Clostridium acetobutylicum using alternative substrates (Jerusalem artichoke juice, technical glycerol, crude glycerol, shredded biomass of soy, rape, wheat and switchgrass). In order to increase the accumulation of butanol in the process of cultivation, the cells of C. acetobutylicum were statically immobilized on carriers (belting strips, ferrite rings and Raschig rings) by the method of adsorption immobilization. The cells were precipitated by centrifugation, the supernatant was distilled and then fermentation products were determined. Gas chromatography was used to determine the presence of solvents in the culture fluid. The biggest accumulation of butanol (2 g/dm3) was at concentration of crude glycerol 16 g/dm3 in the medium, and complete inhibition of culture development — at glycerol concentration 25 g/dm3. The accumulation of butanol by the strain C. acetobutylicum ІМВ В-7407 using fill and draw method depended on the amount of sequestered and infused medium. Immobilization of the culture using the Raschig rings allowed increasing the bioconversion to butanol twice. So it is shown the possibility to use non-traditional substrates for the production of biobutanol. The most accumulation of butanol was achieved using glycerol (11 g/dm3) as water-soluble substrate, and using switchgrass as lignocelluloses substrate (2,6 g/dm3). Immobilization of C. acetobutylicum culture cells on carriers increased the accumulation of butanol. The use of Raschig rings, as carriers for immobilization, allowed increasing the accumulation of butanol twice.

The aim of the work was to investigate the accumulation of butanol by Clostridium strain producers using meshed green rape biomass as substrate. The accumulation of butanol by producer strains was studied using rape as substrate in the doses of 5-30 g/l. The cells were precipitated in an ultracentrifuge, the supernatant was distilled, and fermentation products were determined. The presence of solvents in the culture fluid was determined by gas chromatography. The biggest accumulation of butanol was produced by the strain Clostridium sp. IMB B-7570 on 2.3 g/l mashed switchgrass biomass. The optimal inoculum concentration for maximum accumulation of butanol using switchgrass biomass was 10% of the volume of fermentation liquid. The greatest accumulation of butanol (2.9 g/l) was obtained in optimal culture conditions and at 10 g/l dry switchgrass biomass in the fermentation medium. Thus, the present study showed that mashed switchgrass biomass was assimilated by Clostridium sp. strains. The accumulation of butanol depended on Clostridium strain, the amount of inoculum, the concentration and degree of grinding of the substrate. [ABSTRACT FROM AUTHOR]

The purpose of our work was to study generic and specific affinity of domestic strainsproducers, comparative productivity butanol strains-producers screening, fermentation of sugars being a part of renewable lignocelluloses raw materials and to determine the conditions for the butanol yield increasing. The objects of research were strains Clostridium acetobutylicum ІМВ В-7407 (IFBG C6H), IFBG C4B and IFBG C7P from «Collection microorganism’s stains and plants line for food and agriculture biotechnology» of Institute of Food Biotechnology and Genomics of the National Academy of Sciences of Ukraine. It was determined that domestic butanol-producing strains were relatively more productive and might be promising for improvement technology of butanol production.

The aim of the research was to investigate the accumulation of biobutanol by strains Clostridium acetobutylicum using alternative substrates (Jerusalem artichoke juice, technical glycerol, crude glycerol, shredded biomass of soy, rape, wheat and switchgrass). In order to increase the accumulation of butanol in the process of cultivation, the cells of C. acetobutylicum were statically immobilized on carriers (belting strips, ferrite rings and Raschig rings) by the method of adsorption immobilization. The cells were precipitated by centrifugation, the supernatant was distilled and then fermentation products were determined. Gas chromatography was used to determine the presence of solvents in the culture fluid. The biggest accumulation of butanol (2 g/dm3) was at concentration of crude glycerol 16 g/d3 in the medium, and complete inhibition of culture development — at glycerol concentration 25 g/d3. The accumulation of butanol by the strain C. acetobutylicum ІМВ В-7407 using fill and draw method depended on the amount of sequestered and infused medium. Immobilization of the culture using the Raschig rings allowed increasing the bioconversion to butanol twice. So it is shown the possibility to use non-traditional substrates for the production of biobutanol. The most accumulation of butanol was achieved using glycerol (11 g/d3) as water-soluble substrate, and using switchgrass as lignocelluloses substrate (2,6 g/d3). Immobilization of C. acetobutylicum culture cells on carriers increased the accumulation of butanol. The use of Raschig rings, as carriers for immobilization, allowed increasing the accumulation of butanol twice. [ABSTRACT FROM AUTHOR]

Energy and environmental crisis facing the world force us to reconsider the effectiveness or find an alternative use of renewable natural resources, especially organic «waste» by using environmentally friendly technologies. Microbial conversion of renewable resources of biosphere to produce useful products, including biofuels, currently is an actual biotech problem. Anaerobic bacteria of Clostridiaceae family are known as butanol producers, but unfortunately, the microbiological synthesis is currently not economical one. In order to make cost-effective aceton-butanol-ethanol fermentation, solventproducing strains using available cheap raw materials, such as agricultural waste or plant biomass, are required. Opportunities and ways to obtaine economic and ecological processing of lignocellulosic wastes for biobutanol creation are described in the review .

Getting new, more productive strains of microorganisms that produce butanol is a topical problem. Studing of morphological and physiological characteristics of the isolated strains, improvement of their cultivation conditions, optimization of biobutanol synthesis gives the possibility to organize a cost-effective butanol production technology. The aim of this work was searching new butanol and butyric acid producer strains, their identification and studying the main steps of the selective strains biosynthesis. The objects of this study were microorganisms that had allocated from soils and sludges samples of Kiev’s lakes. Obtained cultures have been screened. Three strains were obtained as promising and identified as C. acetobutylicum, C. tyrobutylicum, C. butylicum. Selective medium have been developed and modified for the microorganisms. Producer’s features were investigated in order to maximize the accumulation of target metabolites.

The aim of this work was to enlarge accumulation of butanol from switchgrass Panicum virgatum L. biomass using strains-producers obtained from grounds and silts of Kyiv lakes. The objects of the study were strains of C. acetobutylicum ІМВ B-7407 (IFBG C6H), Clostridium acetobutylicum IFBG C6H 5М and Clostridium tyrobutyricum IFBG C4B from the “Collections of microbial strains and lines of plants for food and agricultural biotechnology” of the Public Institution “Institute of Food Biotechnology and Genomics” of the National Academy of Sciences of Ukraine. Gas chromatography was used to determine the alcohol concentration at the stage of solvent synthesis. To determine the effect of butanol precursors during cultivation, butyric, lactic and acetic acids were used. Optimization of processing parameters, which was based on the needs of cultures, allowed us to increase the yield by 20 and 50% for the initial and mutant strain respectively. Using synthetic precursors (such as lactic, butyric and acetic acid) during cultivation increased total concentration of butanol by 1.7 times. To optimize the process, a study was carried out using acetone- butyl grains. Using of acetone-butyl grains in concentrations up to 60% does not affect the synthesis of butanol by C. acetobutylicum IFBG C6H 5M. Increasing the concentration of grains led to decrease in accumulation of butanol. Almost double increase in accumulation of the target product (butanol) was achieved using two-stage fermentation and/or precursors of synthesis. It was shown the possibility of using acetone-butyl grains in fermentation. As a result the mass fraction of the waste was reduced. [ABSTRACT FROM AUTHOR]