Search

A "turn-on" photoelectrochemical sensor for Hg2+ detection based on thymine-Hg2+-thymine interaction is presented by using a thymine-rich oligonucleotide film and a double-strand DNA intercalator, Ru(bpy)(2)(dppz)(2+) (bpy=2,2'-bipyridine, dppz=dipyrido[3,2-a:2',3'-c]phenazine) as the photocurrent signal reporter. The presence of Hg2+ induces the formation of a double helical DNA structure which provides binding sites for Ru(bpy)2(dppz)2+. The double helical structure was confirmed by circular dichroism and fluorescence measurements. Under the optimized conditions, a linear relationship between photocurrent and Hg2+ concentration was obtained over the range of 0.1 nM to 10 nM Hg2+, with a detection limit of 20 pM. Interference by 10 other metal ions was negligible. Analytical results of Hg2+ spiked into tap water and lake water by the sensor were in good agreement with mass spectrometry data. With the advantages of high sensitivity and selectivity, simple sensor construction, low instrument cost and low sample volume, this method is potentially suitable for the on-site monitoring of Hg2+ contamination. (C) 2012 Elsevier B.V. All rights reserved.

A novel label-free electrochemical method for measuring the activity of protein tyrosine kinases (PTK) has been developed. Epidermal growth factor receptor (EGFR), a typical PTK associated with a large percentage of all solid tumors, was used as the model kinase. Poly(glu, tyr) (4:1) peptide, as a substrate of EGFR, was covalently immobilized on the surface of indium tin oxide (ITO) electrode by silane chemistry. The tyrosine (Tyr) residue in the polypeptide served as an electrochemical signal reporter. Its voltammetric current was catalyzed by a dissolved electron mediator Os(bpy) 3 2+ (bpy = 2,2′-bipyridine) for increased sensitivity. Phosphorylation of the Tyr led to a loss of its electrochemical current, thus providing a sensing mechanism for PTK activity. Experimental conditions for the silanization of ITO surface and immobilization of polypeptide were investigated in details to facilitate the generation of Tyr electrochemical signal. The proposed biosensor exhibited high sensitivity and excellent stability. The limit of detection for EGFR was 1 U mL −1 . Furthermore, this biosensor can also be used for quantitative analysis of kinase inhibition. On the basis of the inhibitor concentration dependent electrochemical signal, the half-maximal inhibition value IC 50 of three EGFR inhibitors, PD-153035, OSI-774 and ZD-1839, and their corresponding inhibition constants K i were estimated, which were in agreement with those obtained from the conventional kinase assay. This electrochemical biosensor can be implemented in an array format for the high throughput assay of in vitro PTK activity and PTK inhibitors screening for practical diagnostic application and drug discovery.

A simple and sensitive electrochemical biosensor was used to detect tyrosine oxidation induced by hydroxyl radicals generated by Fenton reaction (Fe(2+)/H(2)O(2)). Poly(glu, tyr) (4:1) peptides were immobilized on indium tin oxide (ITO) electrode surface via layer-by-layer assembly technique, and Os(bpy)(3)(2+)-mediated tyrosine oxidation current was employed as the signal reporter of the biosensor. It was found that the electrochemical signal of the peptide decreased markedly after incubation with Fenton reagents. Interestingly, L-dopa, the oxidation product of tyrosine, was likely to form complexes with Fe(III), which could suppress the electro-oxidation of L-dopa and resulted in decrease of current response. Our results indicate that the peptide damage involved two steps and was a second-order reaction. X-ray photoelectron spectroscopy was used to quantitatively determine nitrogen elemental percentage on peptide-coated electrode surface, which eliminated the possibility that signal decrease was caused by peptide backbone cleavage. Moreover, the lowest concentration of Fenton reagents that could be detected was 10 mu M Fe(2+) or H(2)O(2), similar to the level in vivo. We suggest that the biosensor can be used to detect protein damage induced by Fenton reaction. (C) 2010 Elsevier B.V. All rights reserved.

A redox-labeled direct competitive electrochemical immunoassay for polycyclic aromatic hydrocarbons (PAHs) was developed. A ruthenium tris(bipyridine)-pyrenebutyric acid conjugate was synthesized as the redox-labeled tracer. Its recognition by an anti-PAH monoclonal antibody was confirmed by surface plasmon resonance. In the immunoassay, the antibody was immobilized on (3-glycidoxypropyl)-trimethoxysilane (GPTMS)-modified indium tin oxide (ITO) electrodes. The assay was quantified by measuring the electro-catalytic current of the redox label in an oxalate-containing electrolyte which served as a sacrificial electron donor to amplify the current signal. Formation of GPTMS film on ITO and subsequent antibody immobilization were characterized by X-ray photoelectron spectroscopy (XPS) and electrochemistry. Using a ruthenium tris(bipyridine)-conjugated IgG (IgG-Ru) as the surface-bound redox probe, the highest electrochemical signal was obtained on GPTMS electrodes with 1 h modification. Under the optimized conditions for ITO modification, antibody immobilization and tracer concentration, competition curves for benzo[a]pyrene and pyrenebutyric acid were obtained with a detection limit of 2.4 and 10 ng mL(-1), respectively. The redox-labeled electrochemical immunoassay with signal amplification mechanism offers a potential analytical method for the simultaneous detection of multiple environmental organic pollutants on antibody biochips. (C) 2009 Elsevier B.V. All rights reserved.