Search

The secondary treated effluents of pulp and paper mills contain high chemical oxygen demand (COD) that is associated with organic matter. Therefore, this study explores the adsorption of substances contributing to COD using CoFe2O4 and quartz sand-coated CoFe2O4 in batch and fixed-bed column experiments. X-ray diffraction, scanning electron microscopy, Brunauer–Emmett–Teller analysis, and X-ray photoelectron spectroscopy were used to characterize the adsorbents. The quartz sand-loaded CoFe2O4 exhibited a larger pore volume and average pore size. Batch experiments revealed that adsorption on CoFe2O4 closely fit the pseudo-second-order model. To explore the effects of bed depth, feed flow rate, and initial solution pH on the breakthrough characteristics of CoFe2O4-coated sand, fixed-bed column experiments were conducted, and the breakthrough curves were drawn from the ratio of influent COD concentration to effluent COD concentration. The breakthrough time decreased with an increase in the feed flow rate and initial pH but increased with the bed depth. According to the X-ray photoelectron spectroscopy analysis, CoFe2O4-coated sand showed excellent stability due to negligible leaching of metallic elements. These findings have important implications for the advanced treatment of industrial wastewater.

Bagasse spraying wastewater (BSW) is a source of organic pollutants during bagasse processing. In this study, the feasibility of anaerobic treatment of BSW under different calcium concentrations (60 to 2400 mg/L) was studied. The experiment was performed in a lab-scale up-flow multistage anaerobic reactor (UMAR) inoculated with granular sludge, and operated for 160 days at a constant organic loading rate of 6 kg COD/(m3·d). Treatment of BSW with 60 to 800 mg Ca2+/L resulted in 80.7 to 82.7% of COD removal, 161 to 232.7 mg COD/L of volatile fatty acid (VFA) yield, 0.56 to 0.79 m3/(kgCOD·d) of biogas production rate, and 2.4 to 2.66 m3/(m3·d) of volume loading rate (VLR). The pH remained within the optimal range for anaerobic digestion (adjust to pH = 6.8 to 7.0). The VFAs were composed of 77 to 85% acetic acid, 8.4 to 13.2% butyric acid, and 6.6 to 9.6% propionic acid. At higher influent calcium concentrations (> 800 mg/L), the hydrolysis process appeared to be inhibited, affecting the anaerobic digestion performance of the reactor. In particular, the COD removal efficiency decreased to 55.5%, and the VFA content in the effluent significantly increased due to the lower pH. Microbial community analysis showed that at the end of anaerobic digestion, the Syntrophobacter disappeared, and Clostridium and Anerolineaceae were the main genus and family, respectively. Overall, the results indicated that low calcium (< 300 mg/L) had a positive effect on the UMAR performance.