Search

T-shaped mortise and tenon members are the main structure of traditional Chinese furniture. In this paper, the double-dovetail joint used for face-to-face joint of rubber wood (Hevea brasiliensis Muell. Arg) is transformed into a new type of double-dovetail joint and rounded double-dovetail joint for T-shaped members of point joint structure. The ultimate pull-out test and bending strength test were carried out on the two structures and three structures of oval mortise, round rod mortise and right angle mortise. The results show that the ultimate pull-out force of the round double-dovetail joint is 39% higher than that of the double-dovetail joint, and the bending resistance capacity is 8.9% higher, and the strength and stability are better than those of other split mortises and tenons, which proves that this structure can be used in actual production, and also proves that the mortise and tenon connected by the surface has the possibility of transforming into a point connection structure. The concave structure of the rounded double-dovetail joint makes the mortise and tenon fit well, the tenon squeezed tight, and a good bonding effect was achieved. This structure can also provide greater friction and resistance, delay rubber adhesive failure and improve the stability.

Green Velvet Material (PLON), which is prepared from polyester slices, has been called a green material based on its ester composition, its ability to be degraded, and the possibility of recovering the value of used material by reprocessing. PLON is expected to be used as a material for the padding layer of upholstered furniture. This paper presented a comparative study of traditional flexible polyurethane foam and Green Velvet Material as the upholstered furniture’s padding layer. The compression mechanical properties of Green Velvet Material and flexible polyurethane foam, such as indentation force deflection, support performance, compression set, and resilience property, were analyzed. The results showed that Green Velvet Material had lower surface hardness and higher comfort compared to flexible polyurethane foam. In terms of resilience, both high-density and low-density Green Velvet Material performed better than the foam control group, but Green Velvet Material had a poorer ability to regain its shape after prolonged pressure. The 30 kg/m3 density Green Velvet Material was the closest to the compression and resilience properties of flexible polyurethane foam. The conclusions provide theoretical data for the effective and reasonable application of Green Velvet Material in upholstered furniture.