Search

Flow and spontaneous imbibition phenomena in porous media are important for various industrial applications, including printing and medical lateral flow assays. Their quantitative characterization is important to better understand and select the appropriate raw materials. However, standard methods often require time-consuming tests, and/or expensive equipment. Different time scales must be considered, limiting the range of possible characterization tools. A novel experimental approach based on image analysis for characterizing spontaneous imbibition processes is presented. Hence, ultra-fast diffusion may be quantitatively characterized. Models are issued from the literature to consider physical phenomena at small (milliseconds) and medium range (seconds) of time scales. The obtained experimental data fit with theoretical results, providing valuable insights into the understanding of fluid flow behavior at different time scales. Furthermore, the identification of some physical properties for either the fluid, or the substrate, based on the theoretical models are possible, as the contact angle, which remains to be otherwise challenging. This study contributes to bridging the gap between spontaneous imbibition and capillary phenomena at different time scales, their modeling, and a characterization of material and/or fluid properties paving the way for enhanced understanding and control of fluid behavior in porous media. Different papers are considered to illustrate the method. [ABSTRACT FROM AUTHOR]

The overall usefulness of the bursting energy absorption (BEA) was studied for a better analysis of paper strength properties. Additionally, the changes of the BEA during more complex deformations of paper products, e.g., preliminary or simultaneous tensile and burst, were determined. For the purpose of the research, an experimental setup was designed. The results showed that the correlation between BEA and bursting strength was linear, but the proportionality strongly depended on paper grade. Thus, a more accurate method to characterize the bursting resistance (BR) of paper was proposed. The BR parameter is described by the three following parameters: average bursting strength, average bursting energy absorption, and the slope of the fitted linear regression curve (relationship between the bursting energy absorption and the bursting strength). This method revealed new mechanical behaviors of papers related to their preloading. [ABSTRACT FROM AUTHOR]

A new coating method was developed, based on cellulose regenerated from an N-methylmorpholine N-oxide (NMMO) solution applied to paper. In particular, the purpose of this study was to compare the effectiveness of the "deep coating" method using cellulose regenerated from NMMO solution and the classic pulp refining process as methods to improve paper mechanical properties and overall quality. The "deep coating" name comes from the fact that the coating process is combined with subsequent heating of the coating before its final solidification. As a result of this operation, deep penetration of the cellulosic solution into the paper structure occurs. This increases the contact surface of the solution with the cellulosic fibers, which increases the strength properties of the paper structure. It was found that the cellulosic coating increased the apparent density of the paper, the tensile strength, the elongation, the resistance to bursting, and the double fold number. However, the coating also decreased the air permeability and the tear resistance of the paper samples. Despite some technological difficulties, this method could be an attractive solution in the case of a need for additional functionalization of a paper structure. [ABSTRACT FROM AUTHOR]

Specific Edge Load (SEL) and Specific Energy Consumption (SEC) are nowadays the most popular parameters for defining the intensity of pulp refining. As a result, these factors are widely used in industrial practice. The purpose of this research was to determine limitations connected with use of these parameters during bleached kraft pulp refining. Performed tests showed that, despite keeping the SEL and SEC at constant level, changes of pulp refiner consistency always modified the character of the refining process. Obtained results showed that neither SEL nor SEC are fully reliable parameters to describe and to control the refining process. [ABSTRACT FROM AUTHOR]